• 제목/요약/키워드: Measurement base

검색결과 876건 처리시간 0.03초

구조적 대응체 분석법(Counterpart Analysis)에 의한 한국인의 악안면 두개 골격형태에 관한 연구 (STUDY ON THE KOREAN CRANIOFACIAL SKELETAL PATTERN BY COUNTERPART ANALYSIS)

  • 손병화;이윤정;양춘식
    • 대한치과교정학회지
    • /
    • 제30권5호
    • /
    • pp.509-519
    • /
    • 2000
  • Enlow의 구조적 대응체 분석법은 개개인에서 두개안면의 구성양상이 발달되어온 해부학적, 발육학적 특징의 복합체를 설명하고자 하는 것으로 다수의 평균에 의한 정상치와 비교하는 것이 아니고 개인에게서 나타나는 값을 비교하여 분석하는 방법이다. 본 연구의 목적은 두개안면의 골격형태에 인종적, 지역적으로 골격형태의 변이가 있으므로 한국인에 Enlow의 구조적 대응체 분석법을 적용해봄으로써 한국인 정상교합자에 나타나는 두개안면골격의 특성을 규명해보고자 하였다. 본 연구에서는 안모와 교합상태가 양호하고 교정치료의 경험이 없는 정상 교합자 100명(남자 50명, 여자 50명)을 대상으로 구조적 대응체 분석법을 이용하여 계측점과 계측선을 설정하고, 통계처리하여 다음과 같은 결과를 얻었다. 1. PCF와 PMV 간의 각도는 한국인 남자 평균 $38.54{\pm}2.93^{\circ}$, 여자 $38.43{\pm}2.90^{\circ}$으로 나타났고, Wits' appraisal은 한국인 남자 평균 $-2.51{\pm}3.25$와 여자 $-2.3{\pm}2.26$으로 나타났다. 하악지 배열을 나타내는 R4는 한국인 남자 $1.89{\pm}3.15$, 여자 $2.36{\pm}2.84$를 나타냈다. 2. 후두개저와 하악지의 골격적인 수평 길이 차이를 나타내는 A3-B3에서 여자가 남자보다 유의성있게 더 큰 차이를 나타내고 있어 여자가 남자에 비해 하악지가 후두개저(PCF)보다 더 긴 것으로 나타났다. 3. 상악골과 하악체의 길이 차이를 나타내는 A4-B4에서는 남자가 여자보다 유의성있게 더 큰 차이를 나타내고 있어 남자가 여자에 비해 하악체가 상악골보다 더 긴 것으로 나타났다. 4. 상악과 하악의 수평적인 전체 길이차를 나타내는 Al-Bl에서는 남녀에서 성차를 나타내고 있지 않았다. 이상의 결과에서 한국인은 서양인에 비하여 중안면부가 함몰되고 하악골은 전돌되며 하악지가 후하방으로 회전되어 있는 양상을 보인다. 또한 한국인에서 여자가 남자에 비해 하악지가 후두개저에 비해 더 크며 이에 보상적으로 하악체는 상악골에 비해 남자가 여자에 비해 더 크게 나타나는 것을 볼 수 있었다. 이로인해 결과적으로 상악과 하악의 전체적인 길이 차이에서는 남녀간의 차이를 나타내지 않았다.

  • PDF

하악골 후퇴 수술 환자의 연조직 측모 예측의 정확성: Quick Ceph Image $Pro^{TM}$(ver 3.0)와 $V-Ceph^{TM}$(Ver 3.5)의 비교 (Accuracy of soft tissue Profile change prediction in mandibular set-back surgery patients: a comparison of Quick Ceph Image $Pro^{TM}$ (ver 3.0) and $V-Ceph^{TM}$(ver 3.5))

  • 김명균;최용성;정송우;전영미;김정기
    • 대한치과교정학회지
    • /
    • 제35권3호
    • /
    • pp.216-226
    • /
    • 2005
  • 본 연구는 Quick Ceph Image $Pro^{TM}$(ver 3.0)와 국내에서 개발되어 사용 중인 $V-Ceph^{TM}$(ver 3.5) 2 종의 비디오 이미지 예측 프로그램의 수술 후 연조직 측모의 정확성과 신뢰성에 대해서 알아보고자 시행되었다. 골격성 III급 부정교합으로 진단되어 수술 전 교정 치료를 받고. 하악골 후퇴 수술(body osteotomy 또는 SSRO)을 시행한 남녀 환자 각각 20명을 대상으로 하였다. 나이는 평균 $21.4\pm4$세이고, 수술 전 측모두부방사선계측사진은 수술 전 평균 21.1일에 수술 후 측모두부방사선계측사진은 수술 후 평균 335.7일에 촬영되었으며, 예측치와 실측치 차이를 비교하였다. 연구결과 Quick Ceph과 V-Ceph 모두 예측치와 실측치 사이에 크기와 방향에 있어서 오차가 관찰되었으며, 이러한 오차는 상순과 하순. 턱과 연관된 항목에서 크게 나타났다 (p<0.05). Quick Ceph은 A'. Ls, Li의 수평적 위치 및 각 부분에서의 연조직 두께(U1-Ls, L1-Li, Pog-Pog')의 수평거리 예측에서, V-Ceph은 하순의 수직적 위치 예측에서 오차가 컸다 (p<0.05) V-Ceph의 경우 하악골의 이동양이 증가할때 Sn의 수직적 위치, Ls의 수평적 위치 상순의 연조직 두께 (U1 -Ls)처럼 상순과 연관된 계측치에서 예측오차가 컸으며, Quick Ceph의 경우 하악골의 이동양이 증가할 때 하순의 수평위치 및 하순의 두께에서의 예측오차가 작았다 (P<0,05) 또한, 연조직의 두께에 따른 오차를 평가한 결과, Quick Ceph의 경우 상순과 하순의 두께가 두꺼울수록 각각에 관련된 연조직 예측의 오차가 컸으며 (P<0.05). V-Ceph의 경우 하순과 턱의 연조직 두께가 두꺼울수록 턱의 연조직 예측의 오차가 크게 관찰되었다 (p<0.05). 그러나 본 연구에서의 모든 예측오차 값은 3mm 이내로 계측되었으며, 이러한 오차 범주는 임상적으로 허용 가능한 수준인 것으로 생각된다.

충북지역 시설재배지 토성별 토양화학성의 상호관계 (Relationship among Chemical Properties of Soils with Different Texture Taken from Plastic Film House of Chungbuk Area)

  • 김재정;강성수;김기인;홍순달
    • 한국토양비료학회지
    • /
    • 제39권3호
    • /
    • pp.144-150
    • /
    • 2006
  • 1998년부터 2001년까지 충북지역에서 156개 시설토양이 채취되어 시설재배 토양의 화학성에 대한 특성 및 상호관계가 통계적 방법에 의하여 비교 검토되었다. 평가에 적용된 화학성들은 pH외 16개 성분들이며 통계분석은 상관, 표준화된 편회귀계수, 주인자분석 등으로 수행되었다. 표준화된 편회귀계수는 종속변수에 관여하는 회귀변수들의 상대적 중요성을 평가하기 위하여 토양의 유기물 함량과 전기전도도에 관여하는 화학성들의 기여도 분석에 적용되었다. 주인자 분석은 시설재배 토양의 화학성들에 대하여 공통인자에 의한 집단들을 분류하기 위하여 분석하였다. 공시토양의 pH는 양토가 4.24~7.14, 사양토가 4.95~7.35이었고 염류농도를 나타내는 전기전도도는 양토의 경우 최소 0.93에서 최대 $15.65dS\;m^{-1}$, 사양토의 경우 최소 0.91에서 최대 $22.30dS\;m^{-1}$로서 큰 차이를 나타냈다. 전기전도도 측정을 위한 1:5 희석법과 포화 침출법은 고도로 유의성 있는 직선적인 회귀관계를 보였으며 직선식의 기울기는 사양토가 8.599, 양토가 8.163로서 이론적 희석배수 5보다 높게 평가되었다. 표준화된 편회귀계수로 평가한 포화침출법의 전기전도도에 대한 화학성들의 기여도 순위는 양토의 경우 질산태질소 > 염소 > 유기물 > 치환성 고토의 순이었고 사양토의 경우는 질산태질소 > 치환성 고토 > 염소의 순이었다. 전기전도도에 대한 화학성들의 기여도 순위는 포화침출법과 1:5 회석법 사이에 차이를 보여 침출방법에 따른 용액의 화학종 농도는 동일하지 않은 것으로 생각되었다. 따라서 1:5 희석법에 의한 전기전도도 측정은 특정한 계수로 조절하더라도 정확도가 낮아질 수밖에 없으며 가능한 포화용액 침출법이 바람직할 것으로 생각되었다. 상관계수의 크기로 단순히 비교할 때 전기전도도는 토성과 침출방법에 관계없이 질산태질소 > 염소 > 염기포화도 > 치환성 고토 > 치환성 석회 > 황산이온 ($SO{_4}^{2-}$)의 순이었다. 주인자 분석에 의한 시설재배 토양의 화학성은 4개 요인으로 분류되었으며 요인별 특징은 사양토의 경우 1) 염류물질, 2) 토양산도, 3) 흡착고정물질 4) CEC로, 그리고 양토의 경우는 CEC 대신 치환성 소다로 대체되며 화학성들을 분류할 수 있었다.

정보시스템 사용과 성과에 있어서 자발성의 조절효과에 관한 연구 (A Study on the Moderating Effect of Perceived Voluntariness in the Organizational Information System Usage and Performance)

  • 이승창;이호근;정창욱;정남호;서응교
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.195-221
    • /
    • 2009
  • According to an industry report, a large number of organizations have invested in Organizational Information System(OIS) in the past few years. Several research results indicate that successful investments in OIS lead to productivity enhancement, while failed ones result in undesirable consequences such as financial losses and dissatisfaction among employees. In spite of huge investments, however, many organizations have failed in achieving the hoped-for returns from OIS. Thus, understanding user acceptance, adoption, and usage of new IS(Information Systems) is an important issue for IS practitioners. Indeed, study of the user acceptance of new information system has been one of the most important research topics in the contemporary IS literature. Several theoretical models are tested to examine 'user acceptance' and 'usage behavior' in IS context. While many research models incorporate 'ease of use' or 'usefulness' as important factors in explaining user acceptance, Technology Acceptance Model(TAM) has been one of the most widely applied models in user acceptance and usage behavior. Even in recent IS studies that employ theories of innovation diffusion in the area of IS implementation, a major focus has been on the user's perception of information technologies. In this research, we study 'voluntariness' as an important factor in IS acceptance by users. Voluntariness is defined as "the degree to which the use of the innovation is perceived as being voluntary, or of free will" When examining the diffusion of accepting OIS, a thoughtful consideration should be given to 'perceived voluntariness.' Current article has following research questions: 1) What models are appropriate to explain the success of OIS? and 2) How does the 'voluntariness' affect the success of OIS? In order to answer these questions, a research model is proposed to describe the detailed nature of association among three independent variables (IT usage level, task interdependency, and organizational support), a mediating variable (IS usage), a dependent variable (perceived performance), and a moderating variable(perceived voluntariness). The central claim of this article is that organizations hardly realize expected returns from OIS investments unless perceived voluntariness is effectively managed after operating OIS. As an example of OIS in this study we have selected the Intranet of Republic of Korea Air Force (ROKAF). ROKAF has implemented the Intranet in an attempt to improve communication and coordination within the organization. To test our research model and hypotheses, survey questionnaires were first sent out to 400 Intranet users. With the assistance of ROKAF, Intranet users were initially identified among its members, and subjects were randomly drawn from the pool. 377 survey responses were finally returned. The unit of measurement and analysis in this research is a personal level. Path analysis based on structural equation modeling was used to test research hypotheses. Construct validity represents accordance between the theoretical base concept of constructs and its measurement items. Tests for the reliability and discriminant validity are accepted, thus verifying our survey instrument. In this research, we have proposed a conceptual framework to highlight the importance of perceived voluntariness after organization deploys OIS. The results of our analysis present several key finding. First, all three independent variables (IT usage level, task interdependency, and organizational support) have significant effects on IS usage, which will eventually improve performance. Thus, IS usage plays a mediating role between antecedent variables (IT usage level. task interdependency, and organizational support) and performance improvement. Second, the effect of the task dependency was the highest for IS usage among the three antecedent variables. This is highly plausible since one of the Intranet's major capabilities is to facilitate communication among members within an organization. Accordingly, we conclude that the higher the task dependency, the higher Intranet usage. The effect of user's IT usage level was the second, while the effect of the organizational support was the third. Finally, the perceived voluntariness plays a pivotal role in enhancing perceived performance in personal level after launching the Intranet. Relationships among investigated variables were significantly different between groups with a high level and a low level of voluntariness. The impact of the Intranet usage on the performance was greater in the higher level voluntariness group than in the lower one. For the lower level voluntariness group, the user's IT usage had the highest effect on the Intranet usage among the three antecedent variables. In short, our study suggests that the higher the perceived voluntariness is the more IS usage will be. Perceived voluntariness was found to have a moderating effect on the relationships among user IT usage level, task interdependency, IS usage, and perceived performance, supporting all the hypotheses on the moderating effect. Most of all, user IT usage level has the strongest influence on IS usage, indicating that users with superior IT usage are more likely to enjoy a high level of perceived performance.

Flowable Composite Resin의 미세변연누출 및 전단결합강도 (MICROLEAKAGE AND SHEAR BOND STRENGTH OF FLOWABLE COMPOSITE RESIN)

  • 박성준;오명환;김오영;이광원;엄정문;권혁춘;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제26권4호
    • /
    • pp.332-340
    • /
    • 2001
  • Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

  • PDF

체간부의 사상체질별 형태학적 특징에 관한 연구 (A Study on the morphologic characteristics of each constitution's trunk)

  • 홍석철;이수경;이의주;한기환;조용진;최창석;고병희;송일병
    • 사상체질의학회지
    • /
    • 제10권1호
    • /
    • pp.101-142
    • /
    • 1998
  • 1. 연구 목적 및 배경 사상의학(四象醫學)에서의 대소음양인(太少陰陽人)의 체질 구분의 근거는 폐비간현(肺脾肝賢)의 각기 다른 장리로 인한 것으로 이는 폐비간현(肺脾肝賢)의 위치와 사상인(四象人) 구분의 근거인 체형기상(體形氣像)까지 이어진다. 이러한 각기 다른 체형기상(體形氣像)은 사상인 체질 구분의 가장 중요한 단서중의 하나로 이를 측정하여 각 체질의 사초(四焦) 체간부(體幹部)를 수기로 측정한 연구가 있었으나 이는 측정상의 오류가 많아 본 연구에서는 삼차원계측기를 이용하여 각 체질별 체간의 삼차원적인 특징을 해부학적 위치를 중심으로 측정하고 둘레, 단면적, 체적 등의 입체적 측정을 통해 체간부의 정량적인 특정을 살펴 체질 구분에 이용하고자 하였다. 2. 연구 방법 체질진단용 설문지 1번, QSCC(II), 맥진, 침진의 진단 방법을 이용하고 사상의학 전문의에 의해 체질 진단된 건강한 20대에서 40대까지의 성인 남자 40명과 여자 20명을 대상으로 Rapid 3D Color Scanner Model 3030 RGB/PS를 사용하여 삼차원 영상을 촬영한 후 해부학적 구조를 근거로 31항목의 체적, 전표 면적, 높이를 측정하고 25가지의 사초 가설을 설정하여 각 체질별 사초의 삼차원적인 특징을 구하였다. 3. 연구 결과 및 결론 1) 체간부 측정 항목의 절대치 (1) 여자의 특징 태음인이 다른 체질에 비해 체간부가 큰 편이고 소음인이 대개의 경우 가장 작은 경향을 나타내었다. 그러나 갑상연골점의 목둘레, 흉골상단의 단면적과 전둘레, 경폭에서 소양인이 가장 작은 것으로 나타나 소양인이 경부 즉, 체간의 최상부가 가장 둘레가 가는 것을 알 수 있다. 유두선 높이의 단면적, 전둘레, 깊이와 중완선높이의 전후둘레의 체간부에서 태음인이 소음인보다 큰 것으로 나타나 체간부의 상부는 소음인이 가장 작은 것으로 나타났다. 치골상단의 폭은 소양인이 가장 작은 것으로 나타났다. (2) 남자의 특징 갑상연골점, 흉골상단, 액와, 유두, 검상돌기, 중완, 하완, 제부, 상전장골극, 치골결합상단 부위에 이르기까지 전 항목에서 태음인의 체형이 가장 크며 소음인의 체형이 가장 작은 것으로 나타났다. 갑상연골점 높이에서 전후둘레, 폭, 깊이에서 태음인이 가장 크고 소음인이 가장 작은 것으로 나타났다. 유두와 유하간의 수직거리는 소양인이 가장 크고 소음인이 가장 작은 것으로 나타났다. 2) 사초부위의 절대치의 비교 (1) 여자 상초의 항목 중에서 갑상연골점 높이에서 액와선높이까지의 체적과 흉골상단높이에서 유두높이까지의 체간 상부 체적이 소양인이 가장 작았다. 소양인이 체간 상부가 다른 체질에 비해 작다. 중상초 : 중상초의 항목 중 흉골상단에서 중완까지의 체적과 흉골상단에서 검상돌기까지의 체적에서 태음인이 가장 큰 것으로 나타났다. (2) 남자 상초, 중상초, 중하초, 하초의 경우 태음인이 소음인보다 체적이 큰 것으로 나타났다. 3) 체간에서 사초가 차지하는 비율에 대한 고찰 (1) 상초 : 액와에서 상전장골극까지를 사초로 설정할때 상초에 해당하는 액와에서 유두선까지의 높이가 태음인이 소양인보다 큰 것으로 나타나 소양인이 액와점에서 유두선 까지의 거리가 체간에서 차지하는 비율이 가장 짧은 것으로 나타났다. (2) 중상초 : 갑상연골점에서 치골결합상단을 사초로 설정할때 흉골상단에서 유두까지의 높이와 액와에서 유두까지의 높이에서 태음인이 소양인보다 큰 것으로 나타났으며 갑상연골점에서 상전장골극까지를 사초로 설정한 경우 흉골상단높이에서 유두까지와 액와에서 유두까지의 높이에서 태음인이 소양인보다 큰 것으로 나타나 소양인이 중상초의 높이가 체간에서 차지하는 비율이 가장 짧은 것으로 나타났다. (3) 중하초 : 흉골상단에서 상전장골극을 사초로 설정할 때 중완에서 제부까지의 체적과 액와에서 상전장골극까지를 사초로 설정할 때 중완에서 제부까지의 체적이 차지하는 비율이 태음인이 소음보다 큰 것으로 나타나 중완에서 제부가 체간에서 차지하는 비율이 소음인이 가장 작은 것으로 나타났다. 4) 각 체질별 사초의 상관관계 태음인은 상초와 중하초의 상관관계를 체적, 표면적, 높이로 나누어 살펴 보아 대개의 경우 역상관관계를 얻었으며 특히도 표면적의 경우는 상관계수가 -0.9~-1로 나타나 상관정도가 높았다. 소음인과 소양인은 중상초와 하초의 상관관계를 체적, 표면적, 높이로 나누어 살펴 보아 대개의 경우 역상관관계를 얻었다.

  • PDF

Ensemble of Nested Dichotomies 기법을 이용한 스마트폰 가속도 센서 데이터 기반의 동작 인지 (Ensemble of Nested Dichotomies for Activity Recognition Using Accelerometer Data on Smartphone)

  • 하으뜸;김정민;류광렬
    • 지능정보연구
    • /
    • 제19권4호
    • /
    • pp.123-132
    • /
    • 2013
  • 최근 스마트 폰에 다양한 센서를 내장할 수 있게 되었고 스마트폰에 내장된 센서를 이용항 동작 인지에 관한 연구가 활발히 진행되고 있다. 스마트폰을 이용한 동작 인지는 노인 복지 지원이나 운동량 측정. 생활 패턴 분석, 운동 패턴 분석 등 다양한 분야에 활용될 수 있다. 하지만 스마트 폰에 내장된 센서를 이용하여 동작 인지를 하는 방법은 사용되는 센서의 수에 따라 단일 센서를 이용한 동작인지와 다중 센서를 이용한 동작인지로 나눌 수 있다. 단일 센서를 이용하는 경우 대부분 가속도 센서를 이용하기 때문에 배터리 부담은 줄지만 다양한 동작을 인지할 때에 특징(feature) 추출의 어려움과 동작 인지 정확도가 낮다는 문제점이 있다. 그리고 다중 센서를 이용하는 경우 대부분 가속도 센서와 중력센서를 사용하고 필요에 따라 다른 센서를 추가하여 동작인지를 수행하며 다양한 동작을 보다 높은 정확도로 인지할 수 있지만 다수의 센서를 사용하기 때문에 배터리 부담이 증가한다는 문제점이 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해 스마트 폰에 내장된 가속도 센서를 이용하여 다양한 동작을 높은 정확도로 인지하는 방법을 제안한다. 서로 다른 10가지의 동작을 높을 정확도로 인지하기 위해 원시 데이터로부터 17가지 특징을 추출하고 각 동작을 분류하기 위해 Ensemble of Nested Dichotomies 분류기를 사용하였다. Ensemble of Nested Dichotomies 분류기는 다중 클래스 문제를 다수의 이진 분류 문제로 변형하여 다중 클래스 문제를 해결하는 방법으로 서로 다른 Nested Dichotomy 분류기의 분류 결과를 통해 다중 클래스 문제를 해결하는 기법이다. Nested Dichotomy 분류기 학습에는 Random Forest 분류기를 사용하였다. 성능 평가를 위해 Decision Tree, k-Nearest Neighbors, Support Vector Machine과 비교 실험을 한 결과 Ensemble of Nested Dichotomies 분류기를 사용하여 동작 인지를 수행하는 것이 가장 높은 정확도를 보였다.

돼지 대동맥, 폐동맥의 근위부 기하학적 구조 측정을 통한 판막 구조 수치의 계량화와 판막 도안에 관한 연구 (Measurement of Porcine Aortic and Pulmonary Valve Geometry and Design for Implantable Tissue Valve)

  • 박성준;김용진;남진혜;김수완;이창하;임홍국
    • Journal of Chest Surgery
    • /
    • 제43권6호
    • /
    • pp.602-613
    • /
    • 2010
  • 배경: 사람의 수명이 연장되면서 판막 질환이 점차 증가하는 가운데, 과거에는 심장 판막 이식에 기계 판막을 많이 사용하였으나, 혈액 응고 장애로 인한 출혈, 임신 시 태아의 기형 가능성, 판막의 급성 기계적 작용 부전, 평생 약을 복용해야 하는 불편함 등의 여러 합병증이 동반되는 단점이 있어, 조직 판막 사용이 증가하고 있고, 그 내구성을 높이기 위한 연구와 관심이 점차 증가하고 있다. 현재 사용하는 조직 판막은 외국계 회사의 수입된 제품으로서 그 구조나 도안에 이론적인 제안 등이 부족한 실정이다. 이에 본 연구는 돼지의 대동맥 및 폐동맥 판막의 구조에 대한 기하학적 분석을 시행하고, 각 수치를 계량화, 분석하여 그 3차원적 구조를 이해하여 대동맥 판막과 폐동맥 판막을 만들 수 있는 이론적 배경을 제시하고자 하였다. 대상 및 방법: 도축한 25마리의 돼지에서 채취한 대동맥 판막과 폐동맥 판막을 신선한 상태에서, 그리고 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막의 각 구조물 수치를 2차원적으로 측정하여 그 배율을 계량화하고 분석하였다. 신선한 상태와 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막엽 간 길이, 접합면 간 길이, 판막엽의 높이, 접합면 높이를 각각 측정하였다. 또한 이식 가능한 판막을 제작하기 위하여 스텐트의 도안으로 모양, 유순도에 따른 스텐드의 두께, 높이, 간격 및 판막 크기에 따른 심낭 판막엽의 크기, 모양, 두께 등을 도안하였다. 결과: 돼지 대동맥과 폐동맥 판막의 수치 및 각 구조물들의 배율을 구하였다. 대동맥 판막 및 폐동맥 판막은 각각 우측 관상동맥 첨판 및 우향 관상동맥 첨판의 크기가 상대적으로 제일 컸다. 무접합 관상동맥 첨판이 가장 작았으며(우향 관상동맥 첨판: 무접합 관상동맥 첨판: 좌향 관상동맥 첨판=1.00 : 0.88 : 1.00), 판막의 높이는 첨판의 크기에 비례하였다. 스텐트를 사용한 돼지 대동맥 판막은 외측 직경 크기를 19 mm부터 33 mm까지 정하였고, 이전에 정한 비율 및 스텐트 두께, 그리고 실제 판막 제작에 필요한 봉합 두께와 판막 주변 벽의 두께 등을 고려하여 스텐트의 높이 ($R{\times}1.4$, R: radius, 직경), 폭, 간격 수치를 정하였으며, 심낭을 이용한 판엽은 판막의 직경, 각 첨판 길이 ($2{\times}R$), 높이 ($R{\times}1.4$)와 첨판의 최소 접합면을 고려하여 스텐트 크기와 함께 모양을 도안하였다. 결론: 25개의 돼지 대동맥 판막과 폐동맥 판막의 구조물에 대한 수치를 측정하여 판막들의 기하학적 비율을 계산하고, 여려 크기의 이식형 돼지 대동맥 판막을 만들어 볼 수 있었으며, 또한 소의 심낭을 이용하여 다양한 표기의 판막을 만들어 볼 수 있는 이론적 근거를 만들 수 있었다. 향후 이러한 도안의 판막 제작 후 충분한 생체 내외의 실험 및 추가 연구가 필요할 것으로 생각된다.

격강구(隔薑灸)의 연소(燃燒) 특성(特性)에 관한 실험적(實驗的) 연구(硏究) (Experimental Study on the Characteristics of Combustion in the Indirect Moxibustion with Ginger)

  • 이건목;이건휘;문성재;황병천;국우석;장지연;김양중;장재호;윤주영
    • Journal of Acupuncture Research
    • /
    • 제21권3호
    • /
    • pp.193-214
    • /
    • 2004
  • Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

  • PDF

구조적 대응체 분석법에 의한 골격성 II급 부정교합 환자의 악교정 수술전후의 비교 (A Comparison of pre and post-surgical characteristics in skeletal Class III malocclusion patients using counterpart analysis)

  • 손병화;경승현;김범수
    • 대한치과교정학회지
    • /
    • 제34권1호
    • /
    • pp.93-107
    • /
    • 2004
  • Enlow의 구조적 대응체 분석법은 다수의 평균에 의한 정상치와 비교하는 분석법과는 달리 개개인에서 두 개안면의 구성양상이 발달되어온 해부학적, 발육학적 특징의 복합체를 설명하는 방법이다. 본 연구에서는 악교정 수술을 시행한 골격성 III급 부정교합 환자 80명(남자 40명, 여자 40명)을 대상으로 구조적 대응체 분석법을 이용하여 수술 전후를 비교하고, 정상교합자와 비교하여 다음과 같은 결과를 얻었다. 1. 수술에 의해서 주로 하악지 전후방 길이(B3)가 감소되어 상하악의 전후방적 부조화가 해소되었다. 2. 수술에 의해서 하악지의 배열(R3, R4)이 후방으로 재배열되었으며 교합평면(R5)은 후하방으로 회전되었다. 3. 수술후와 정상교합자의 비교결과 수술후에 골격성 III급 양상은 해소되었으나 두개저수준(R1, R2)에서는 차이를 보이고 있다. 4. 수술방법에 따른 비교결과 양악수술은 상악골의 길이(A4), 하악지의 배열(R3, R4), 교합평면의 각도(R5)에서 하악수술과 차이를 보였으나 두 그룹간의 차이는 크지 않았다. 한국인 골격성 III급 부정교합자의 특징을 살펴본 지난 연구에서 골격적 원인은 두개저의 후상방회전, 상악골의 후방위치, 하악지의 전방경사, 하악골체부의 길이증가였는데 본 연구 결과 실제 수술에서 개선되는 요소는 주로 하악지의 전후방 길이 감소, 상악골의 전진이기 때문에 상대적인 개선으로 골격성 III급 양상이 해소되었다고 볼 수 있다. 이러한 결과는 실제적인 수술부위가 상악골과 하악골의 일부에 국한되기 때문이다.