• 자원ㆍ환경경제연구
• /
• 제16권3호
• /
• pp.549-574
• /
• 2007

이 논문의 목적은 한국의 환경정책을 간략하게 개관하고 한국의 환경적 지속가능성을 잘 알려진 지속가능성지수에 비추어 평가하고 동아시아 주요국들과 비교해 보고자 하는 것이다. 한국의 환경정책에 대한 개관과 평가는 주로 정부의 "Green Vision 21", "Green Korea 2005", 그리고 OECD의 Environmental Performance Review : Korea 2006에 나온 내용을 근거로 한 것이다. 한국의 지속가능성을 동아시아 다른 나라들과 비교한 부분은 EF, ESI, SPI, EVI 등 잘 알려진 환경적 지속가능성 지수를 인용하여 비교해 본 것이다. 그러나 이러한 지수들을 국가간 비교에 적용해 보려고 시도해 본 결과는 이들 지수들이 국가간 그리고 시점간 비교 가능성을 결여하고 있다는 것이었다. 그리고 이들 지수들은 지속가능성이란 개념을 충실히 반영하여 환경적 지속가능성을 측정할 수 있도록 구성되어 있지 않다는 점이 지적되었다. 그러므로 우리는 환경적 지속가능성의 개념을 비교적 충실히 반영하고 있다고 생각되는 세계은행이 제시한 'genuine saying'의 개념에 입각한 '지속가능량' 지수에 착안하여 이를 한국과 한국의 주요 무역대상국에 대해 계산하고 비교해 본 다음, 이 지수의 1985~1995년 기간중 변화 요인을 분석한 결과를 간단하게 제시해 보이고 그 함의를 설명함으로써 대안을 제시해보고자 하였다.

• 수산해양기술연구
• /
• 제20권1호
• /
• pp.11-16
• /
• 1984

어군량의 추정에 필요한 활어체의 후방산란단면적을 실험수조 내에서 40KHz와 170KHz의 음파로써 담수어인 메기.잉어.틸라피아, 해수어인 볼낚.농어.숭어.용치놀래기 등에 대해 측면(side aspect)에서 각각 75~216회 측정한 결과는 다음과 같다. 1. 전장(total length)이 10.7~24.0cm인 어체들의 후방산란단면적은 5.62$\times$10 상(-5) m 상(2) ~7.23$\times$10 상(-4) m 상(2)였으며, 그 표적강도는 -42.50dB~-31.38dB이었다. 2. 어체의 크기와 표적강도의 일반적인 관계는 어종과 주파수에 따라 다르나, 대체로 큰 어체일수록 잘 반사하는 경향을 나타내었다. 3. 활어에 대한 유효산란길이의 확률분포와 Rayleigh 분포화의 적합도를 유의수준 5%에서 x 상(2) 검정한 결과, 파장에 대한 어체의 길이의 비(acoustic length ratio)가 4.5 및 4.7처럼 적을 때에는 Rayleigh 분포를 이루지 않는다는 것을 알 수 있었다.

• 사상체질의학회지
• /
• 제19권2호
• /
• pp.22-29
• /
• 2007

1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.

• 동아시아식생활학회지
• /
• 제18권6호
• /
• pp.1032-1038
• /
• 2008

This study was conducted to develope carbohydrate-based fat replacement for use in the preparation of non-(trans) fatty acid and low-caloric bread. Characteristics such as leavening height of batter, pH, titratable acidity, specific volume, sensory evaluation, shelf life and texture change of bread made using 11 types of carbohydrate-based fat replacements were measured. The 11 carbohydrate-based fat replacers (No. $1{\sim}11$) were prepared using maltodextrin as a base, and different ratios of calcium sulfate, ascorbic acid, sodium stearoyl lactylate and methyl cellulose. The pH was lowered and the total titratable acidity was increased after four hours of fermentation in the control and the samples of dough that contained the fat replacement. In addition, the leavening height of the control was 5.0cm (maximum) after two hours of fermentation and 4.6 cm after four hours of fermentation, which was similar to the heights observed when No.$9{\sim}11$ were evaluated. When the specific volume of the bread was evaluated, the 3% of fat replacement No. 10 produced the best results. When taste was evaluated, there was no significant difference between the control and the bread produced using 1% No. 10, however, there was a significant difference between the control and all samples that contained 2% or more of the fat replacement. Furthermore, the addition of a greater concentration of the fat replacer resulted in a greater moisture. However, there were no significant differences in the color of the control and any of the samples. Additionally, measurement of the firmness of the bread during four days of storage at $25^{\circ}C$ revealed that it decreased as the concentration of fat replacer increased. In addition, the sample that contained 3% of sample No. 10 showed a firmness of 18kgf after three days of storage, while the control showed a firmness of 18kg after two days, which indicates that the degradation of the bread that contained the fat replacer was delayed by one day. The bread made using fat replacers was found to have a better taste, flavor, color, texture and firmness than the control, and the best results were observed in response to the addition of 3% of replacement No. 10. The results of this study will be useful in the production of non-(trans) fatty acid, low caloric bread.

• 지구물리
• /
• 제6권1호
• /
• pp.39-46
• /
• 2003

경상북도 경주시 양북면 용당리 감은사지터에 위치한 쌍둥이 3층석탑(전체높이 약 13.4 m, 기단폭 6.78 m x 4.4 m)은 682년에 건립된 국내 최대 3층 석탑으로 국보급 문화재이다. 3층석탑의 서탑(이하 감은사지서탑)은 1959년에 해체 수리되었으나, 현재는 석탑 석재인 화강섬록암의 심한 풍화가 관찰되며, 탑의 구조적 불균형에 의하여 생겨난 하중의 편중으로 일부 옥개석 사이가 역 V자형으로 벌어져 있다. 일반적으로 석탑 안정성 진단을 위해서는 석탑과 인근의 지반환경을 이해하는 것이 필수적이다. 이 연구에서는 감은사지서탑 주변에서 탄성파탐사와 전기비저항탐사의 복합 지구물리탐사를 실시하였다. 웨너법에 의한 천부층의 전기비저항 수평 분포는 55∼350 Ωm의 범위인데, 대체로 석탑 남서측면이 상대적으로 높은 비저항인 반면 북동측은 100 Ωm이하의 낮은 비저항 지역으로서 연약지반으로 해석된다. 이는 동측 방향으로의 구조적인 기울임이 관찰된 석탑의 변위측정 결과와 부합한다. 탄성파 굴절법 탐사에 의하면 석탑인근의 약 3 m 두께의 최상부층의 탄성파 P파 속도범위는 200∼700 m/s이다. 복합지구물리 탐사결과 나타난 감은사지서탑의 기초는 약 11 m x 11 m의 장방형 형태로 약 3 m 깊이까지 분포하는 것으로 해석된다.

• 한국지구과학회지
• /
• 제38권2호
• /
• pp.129-140
• /
• 2017

이 연구에서는 지표 관측 자료와 위성 자료 그리고 GWNU 단층 복사 모델을 이용하여 맑은 상태의 전천 일사량을 계산하였으며, 전운량에 따라 관측 및 모델의 일사량 값을 비교 분석하였다. 연구 자료는 2012년 강릉원주대학교 복사 관측소의 전천 일사량, 기온, 기압, 습도, 에어로졸 등의 관측 자료와 OMI 센서의 오존전량 자료 그리고 구름의 유무 및 전운량을 판단하기 위하여 자동 전운량 장비인 Skyview 자료를 이용하였다. 전운량이 0 할인 맑은 날의 경우 관측 값과 모델 값이 0.98로 높은 상관계수를 나타내었으나 RMSE가 $36.62Wm^{-2}$로 비교적 높게 나타났다. 이는 Skyview 장비가 얇은 구름이나 박무 및 연무 등의 기상상태를 판단하지 못하였기 때문이다. 흐린 날의 경우 구름의 영향을 보정하기 위해 전운량과 두 값의 차에 대한 비율을 이용한 회귀식을 복사 모델에 적용하였으며, 장비의 오탐지를 제외한 경우 상관계수가 0.92로 높은 상관성을 보였으나 RMSE가 $99.50Wm^{-2}$으로 높은 값을 보였다. 더 정확한 분석을 위해서는 직달 성분의 차폐 유무 및 구름 광학 두께를 포함한 다양한 구름 요소의 추가적인 분석이 요구된다. 이 연구결과는 분 또는 시간에 따른 일사량을 산출하여 일사량이 관측되지 않는 지역에서 유용하게 사용될 수 있다.

• 한국환경보건학회지
• /
• 제28권1호
• /
• pp.21-29
• /
• 2002

To identify and evaluate the dichlorobenzidine(DCB)-DNA adducts in liver cell and bladder epithelial cells by $^{32}$ P-postlabeling and GC/MS-SIM, we orally exposed the dichlorobenzidine(20mg/kh body wt./day) to male Sprague-Dawley rats(l85$\pm$10g) for 14 days. Two kinds of DCB-DNA adduct(A1 and A2) were found at the same site of thin layer chromatogram of $^{32}$ P-postlabeling method in liver cells and bladder epithelial cells. In liver cells, relative adduct labeling(RAL) $\times$ 10$^{12}$ of DCB-DNA adduct A1 were 34.1$\pm$3.71 and 69.9$\pm$5.02, that of adduct A2 were 74.1$\pm$10.1 and 105.1$\pm$10.1 on 10 and 14 days after treatment, respectively. And in bladder epithelia cells, RAL $\times$ 10$^{12}$ of DCB-DNA adduct A1 were 5.92$\pm$1.60 and 15.9$\pm$1.31, that of adduct A2 were 9.81$\pm$2.81 and 22.8$\pm$1.79 on 10 and 14 days after treatment, respectively. DCB metabolites formed DNA adducts were monoacetyl-dichlorobenzidine(acDCB) and diacetyl-dichlorobenzidine(di-acDCB), which was identify by gas chromatography/mass spectrometry-scan ionization mode(GC/MS-SIM), after hydrolysis of DCB-DNA adducts isolated from live cells and bladder epithelial cells. The base peak of acDCB were 252 and 294 m/z, and that of di-acDCB were 252, 294 and 336 m/z. In conclusion, the exposed DCB formed two kinds of DCB-DNA adduct, the proximate materials of that were acDCB and di-acDCB in liver and bladder epithelial cells. And the above GC/MS-SIM method was found the DCB-DNA adducts could be monitoring by gas chromatography.

• 대한화학회지
• /
• 제61권6호
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• 치과방사선
• /
• 제26권2호
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.212-234
• /
• 1999

Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.