• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.932-937
• /
• 2008

The pulsation of a reciprocating type hydrogen compressor is occurred from the mechanism and this pulsation makes much noise and vibration. To reduce this pulsation, snubber is usually installed on that. To maintain the efficiency in the reciprocating type hydrogen compressor, the pulsation and vibration should be reduced. so it is necessary to research about the characteristic of pulsation and vibration. Therefore in this paper, the vibration characteristic of the snubber is analyzed in the base of optimized modeling condition through the flowing analysis of existing snubber. The prototype of reciprocating type hydrogen compressor is analyzed with numerical analysis. And making sure the present condition of hydrogen compressor through measurement of vibration and noise, and then it is established that the vibration characteristic data base on numerical analysis which will be develope.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권10호
• /
• pp.611-617
• /
• 2003

A mechanical or electrical stimulation to the mandibular symphysis during a maximal voluntary clenching of the teeth always produces a jaw jerk followed by a silent period (transient stops) in the masseteric EMG (electromyogram). Generally, a mechanical stimulation is followed by a single silent period, and an electrical stimulation is followed by multiple silent periods. In this paper, we propose a new algorithm for determining the duration of the masseter silent period. The decision approach in essentially based upon a segmentation algorithm consisted of variance filter, median filter and gaussian filter. The new adaptive digital notch filter using R-CLMS(reverse constrained least mean-squared) algorithm is proposed for the elimination of powerline(60Hz) noise. At the same time, we design a real time measurement system for the EMG silent period under Window base.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.616-619
• /
• 2005

An extensive data base of HRTFs (Head Related Transfer Functions) has been established in order to work with high qualifies of 3D acoustic appliances. The basic specifications of the measurement presented are that a spatial resolution of 10$^{\circ}$ in elevation angles (ranging from -40$^{\circ}$ to 90$^{\circ}$) and uniform spatial resolution of 5$^{\circ}$ in azimuth angles. The distance from the measurement sources to the centre of the dummy head is 2m and the sampling frequency is 48 kHz and the quantisation depth is 24-bits. The data is presented for three arrangements of pinna models (large, small and no pinna) which were combined with the open and blocked ear canal cases to give a total of 6 sets of measurements. The data base may contribute to show promise of providing useful applications of 3D sound.

• 비파괴검사학회지
• /
• 제2권2호
• /
• pp.9-16
• /
• 1983

There are two weak points in a high pressure vessel, one is a corner, the other is a crack on the base. In order to evaluate safety of a department of a corner and a crack like a starfish on the base in a high pressure vessel (working pressure: $130kg/cm^{2}$), which was made by Marison's Process, we analyzed stress by strain gauge, measured thickness and hardness by ultrasonic testing, and were able to test pressure by water pressure from nondestructive testing. Also destructive testings were applied to measure thickness and to observe microstructure and chemical composition of a corner on the base. From the results of the experiment, values of experiment were satisfied with a condition of application. But, it is considered that a crack on the base is to be investigated with more by Fracture Mechanics.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.149-149
• /
• 2020

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1235-1239
• /
• 2003

On the base of network frame and protocol system of Ethernet the networked sensing technology based on Ethernet is studied and the design principles of industrial Ethernet measurement of control system is put forward, and the general structure model is built in the paper. An eight-bit economical MCU scheme is proposed, and a general scheme of distributed intelligent networked measuring and control equipment based on TCP/IP is designed too. A compact TCP/IP protocol stack are successfully implemented in eight-bit MCU. With C51 program language, method of modularized programming is applied in soft design. The problem of in-system modifying measuring and control strategy of its system is solved successfully by assigning memory dynamically and saving parameter with EEPROM, and it makes the intelligent networked measurement and control system can explain and analyses control strategy from PC. Experiment result shows that, the research of intelligent networked measurement and control equipment and system base on TCP/IP is successful, with flexible network, convenient usage, and good commonality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.78-81
• /
• 2004

A technical performance of the coating depends greatly on the thickness of painting film or coating film. Therefore the confirmed report of the technique to measure accurately is essential to the coating film thickness for the assessment about a coating quality performance. In this paper, two gap sensors - eddy current gap sensor and capacitance gap sensor - which has a different operating principle were used to measure the thickness of a nonmagnetic substance coating film such as paint, enamel or ceramic that was coated on the metallic material. A capacitance gap sensor was used to measure the distance between the sensor head and a coating film and an eddy current gap sensor to measure the distance between the sensor head and a base metal. Then the thickness of a coating film was obtained by the difference of two measurement value. At this result, the suggested dual sensor can measure an arbitrary film thickness to be coated on a base metal as the measurement value of coating thickness exists accurately within the 2％ error.

• Journal of Korean Biological Nursing Science
• /
• 제15권2호
• /
• pp.43-53
• /
• 2013

Purpose: This study was intended to analyze the types and measurement parameters of non-pharmacological interventional studies for nonalcoholic fatty liver disease (NAFLD). Methods: NAFLD related literatures were systematically reviewed. The existing literatures were searched electronically using the data base of PubMed, a Medline data base of the National Library of Medicine with the key words of nonalcoholic fatty liver disease, NAFLD, nonalcoholic steatohepatitis, and NASH. The criteria for inclusion in this review were 1) non-pharmacological intervention, 2) human, 3) English. Finally, 20 articles were included in the review. Results: The major findings of this study were as follows: 1) the types of non-pharmacological intervention were exercise (35%), caloric restriction (30%), and lifestyle modification with combination both of exercise and caloric restriction (35%), 2) Almost all studies adopted various measurement parameters derived from pathophysiological mechanism-based biomarkers such as anthropometric indices, biochemical parameters, body fat mass, and liver biopsy results. Conclusion: Non-pharmacological interventions have been reported to be effective to improve NAFLD status, and many objective biomarkers confirmed supported these findings. Therefore, the development of nursing interventions for NAFLD subjects is needed and the consideration of using mechanism-based biomarkers is suggested to verify nursing outcomes objectively.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1155-1158
• /
• 1993

Proficiency in creating a knowledge base is required for high accuracy fuzzy control. To overcome this a fuzzy inference method is proposed that take these membership functions from the probability densities showing the distribution of the mesurement values. And a method using a rough fuzzy knowledge base automatically created from the basic measurement data and tuned using the gradient method is proposed. In actual tests, these were applied to automatic high accuracy adjustment devices for magnetic head and for high frequency circuits with good results.

• 대한전기학회논문지
• /
• 제39권7호
• /
• pp.720-728
• /
• 1990

A learning control method is proposed in this paper, using a knowledge base which contains control rules, data, and patterns of the past experience of a plant. The knowledge for plant control is retrieved from measurement data during operation and continually modified after control performance evaluation. A control method is proposed using tinually modified after control performance evaluation. A control method is proposed using fuzzy model of the plant and a recursive statistic decision method of fuzzy subset for control rule generation. Also, the resulting knowledge-based control algorithm has been applied to aprocess and its performance improvement and proper generation of appropriate control rules have been verified.