• 인지과학
• /
• 제28권1호
• /
• pp.1-26
• /
• 2017

본 연구는 청각 oddball 방안, 사건관련전위와 sLORETA를 사용하여 조현형 인격 성향을 가지는 대학생의 P300 신호원을 조사하였다. 또한 P300 신호원의 전류밀도와 조현병 증상간의 관계를 조사하였다. Schizotypal personality questionnaire(SPQ)의 점수에 근거하여 조현형 인격성향군(n=37)과 정상통제군(n=42)을 선정하였다. P300은 자주 제시되는 표준 자극(1000Hz)과 드물게 제시되는 목표 자극(1500Hz)으로 구성되는 청각 oddball 과제를 사용하여 측정하였으며, 참여자들은 목표 자극이 몇 번 제시되었는지 횟수를 세어 실험 후 보고하는 것이 요구되었다. 행동분석 결과, Oddball 과제의 정확률에서는 두 집단 간 유의한 차이가 관찰되지 않았다. 사건관련전위를 분석한 결과, 조현형 인격성향군이 정상통제군에 비해 유의하게 감소된 P300 진폭을 보였다. P300의 신호원을 추정하기 위하여 sLORETA를 사용하여 분석한 결과, 두 집단 모두에서 좌우반구 전두엽, 두정엽, 측두엽, 후두엽에 분포되어 관찰되었다. 두 집단의 P300 신호원의 전류밀도를 비교한 결과, 조현형 인격성향군이 정상통제군에 비해 좌반구 상측두회와 우반구 중측두회에서 감소된 활성화를 보인 반면 좌반구 하전두회와 우반구 상전두회에서는 활성화 증가를 보였다. 이에 덧붙여, 조현형 인격성향군에서 우반구 상전두회의 전류밀도와 SPQ의 와해 점수 사이에 부적 상관이 관찰되었다. 이러한 결과는 P300 신호 원인 전두 및 측두 영역의 이상을 조현병 환자뿐만 아니라 경미한 증상을 가지고 있는 조현형 인격성향군도 가지고 있음을 시사한다. 이에 덧붙여 본 연구 결과는 조현병 고위험군의 선별에 사용되는 SPQ의 경우 총점보다는 와해 점수가 고위험군의 선별에 더 유용하게 사용될 수 있음을 시사한다.

• Journal of Astronomy and Space Sciences
• /
• 제35권3호
• /
• pp.201-210
• /
• 2018

The characterization of detectors installed in space- and ground-based instruments is important to evaluate the system performance. We report the development of a detector performance test system for astronomical applications using the Andor iKon M CCD camera. The performance test system consists of a light source, monochromator, integrating sphere, and power meters. We adopted the Czerny-Tuner monochromator with three ruled gratings and one mirror, which covers a spectral range of 200-9,000 nm with a spectral resolution of ~1 nm in the visible region. Various detector characteristics, such as the quantum efficiency, sensitivity, and noise, can be measured in wide wavelength ranges from the visible to mid-infrared regions. We evaluated the Korea Astronomy and Space Science Institute (KASI) detector performance test system by using the performance verification of the Andor iKon-M CCD camera. The test procedure includes measurements of the conversion gain ($2.86e^-/ADU$), full well capacity ($130K\;e^-$), nonlinearity, and pixel defects. We also estimated the read noise, dark current, and quantum efficiency as a function of the temperature. The lowest measured read noise is $12e^-$. The dark current at 223 K was determined to be $7e^-/s/pix$ and its doubling temperature is $5.3^{\circ}C{\pm}0.2^{\circ}C$ at an activation energy of 0.6 eV. The maximum quantum efficiency at 223 K was estimated to be $93%{\pm}2%$. We proved that the quantum efficiency is sensitive to the operating temperature. It varies up to 5 % in the visible region, while the variation increases to 30 % in the near-infrared region. Based on the comparison of our results with the test report by the vendor, we conclude that our performance test results are consistent with those from the vendor considering the test environment. We also confirmed that the KASI detector performance test system is reliable and our measurement method and analysis are accurate.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.49-53
• /
• 2007

직접 메탄올 연료전지는 간단한 구조와 디자인 그리고 높은 에너지 밀도와 에너지 변환 효율등의 장점으로 인하여 휴대용 장치들의 전력원으로 사용된다. 본 논문에서는 직접 메탄올 연료전지의 연료 농도를 감지하기 위한 얇은 나피온 막과 Pt 촉매전극의 합성으로 만들어진 메탄을 센서를 제작하였다. 제작된 메탄을 센서를 사용하여 메탄올 농도와 촉매전극(Pt)의 두께 변화에 따른 전류-전압 특성을 분석하였다. Pt 촉매전극 10nm, 전압이 1V 이고 메탄올 농도 1, 2, 3M일 때 전류 값이 각각 $1.30{\times}10^{-6}A,\;1.96{\times}10^{-6}A,\;2.80{\times}10^{-6} A$ 이었다. 메탄올 농도를 2M로 고정하고 촉매전극의 두께를 5, 10, 15nm로 변화시켰을 때 전류 값은 각각 $3.06{\times}10^{-6}A,\;1.96{\times}10^{-6}A,\;1.00{\times}10^{-6}A$ 이었다. 촉매전극이 얇을수록 전류가 증가하고 전기화학반응이 더 활발히 일어나는 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제22권6호
• /
• pp.487-496
• /
• 2001

본 연구에서는 PIC(마이크로 컨트롤러)를 이용하여 전정계 기능 검사를 할 수 있도록 앙극 (bipolar) 자극이 가능한 정전류 자극기를 제작하였다. 정전류원이 구동할 수 있는 최대 부하와 최대 전류는 각각 3$k\Omega$. 5mA로 하였다. 그리고 자극 패턴은 직류. 정현파, 혹은 펄스파가 가능하도록 제작하였다. 정상인 20명을 대상으로 전기 자극 방법에 따른 안구 운동을 영상 안구운동 검사기(videooculograph; VOG)를 이용하여 분석하였다. 자극 패턴은 직류. 자극 시간은 30초로 하여. 전류의 세기에 대한 안진 반응을 살펴보기 위해 각 피검자마다 자극 전류가 0.75. 1, 2. 3mA인 경우에 대하여 실험하였다 자극 전류의 세기가 2mA 이상일 때는 검사 대상자 모두에게서 안진이 발생하였다 전류의 세기를 0.75에서 3mA로 증가시켰을 때. 느린 성분의 안구운동 속도의 평균은 1.1에서 4.8 deg/sec로 증가하였고. 안진의 평균 횟수 또한 17회에서 48회로 증가하였다. 전기 자극으로 인한 빠른 성분의 안구운동은 일관되게 음 자극을 가하는 전극이 있는 방향으로 나타났으며 좌우 반응의 타이를 나타내는 비대칭도는 전류가 증가할수록 감소하였다. 본 연구는 전기 자극을 이용한 전정 기능 평가와 전정 안반사의 생리기전 연구의 기초 자료로 활용할 수 있을 것으로 사료된다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.33-39
• /
• 2013

PURPOSES : This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn't change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS : Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.

• 한국입자에어로졸학회지
• /
• 제16권4호
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.29-41
• /
• 1993

In order to surface Hydrophobilization of Poly(ethylene terephthalate) (PET) fiber samples were treated in the atmosphere of CF$_{4}$ or $C_{2}$F$_{6}$glow discharge. The sample used in this study was PET film which is 75$\mu$m thick made by Teijin, O-Type(Japan). The cleaned samples were placed in plasma reactor made of pyrex glass cylinder, and plasma processing was carried out by glow discharge of CF$_{4}$ or $C_{2}$F$_{6}$ gas, being continuously fed by gas flow and continuously pumped out by a vacuum system. Electric power source for generate plasma state was sustained alternating current(60Hz) and voltage was sustained 600 volt. The duration of plasma treatment varied from 15 to 120 seconds except special case, the monomer gase pressure varied from 0.02 to 0.3 Torr and power range was 10 to 90 watts. The hydrophobic features of changed PET surface were evaluated by contact angle measurement and surface chemical characteristics were analyzed by ESCA. Results can be summerized as follows. 1. The most favorable setting position of substrate was the center area between the two electrodes. 2. $C_{2}$F$_{6}$ discharge current was lower than that of CF$_{4}$ when same voltage was sustained. Treated efficiency between CF$_{4}$ and $C_{2}$F$_{6}$ did not revealed significant differences under same electric power(wattage). 3. When monomer pressure is very low below 0.02 torr, as though substrate is exposed to CF$_{4}$ or $C_{2}$F$_{6}$ plasma, it tend to be hydrophilic through a little of fluorine bond and a great deal of oxidizing reaction. 4. There brought good hydrophobilization when monomer pressure was more 0.1 torr and duration of glow discharge treatment was over 45 seconds. When monomer pressure was too high, discharge current became low. Although prolong the duration, there was no more high hydrophobilization. 5. According to ESCA analysis, there were a little CF bond and a prevailing CF$_{2}$ bond in CF$_{4}$-treated substrate. There were CF$_{3}$, a little CF and a prevailing CF$_{2}$ bond in $C_{2}$F$_{6}$-treated substrate.d substrate.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.743-748
• /
• 2010

Boron nitride (BN) and carbon nitride (CN) films, which have relatively low work functions and commonly exhibit negative electron affinity behaviors, were coated on carbon nanotubes (CNTs) by magnetron sputtering. The CNTs were directly grown on metal-tip (tungsten, approximately 500nm in diameter at the summit part) substrates by inductively coupled plasma-chemical vapor deposition (ICP-CVD). The variations in the morphology and microstructure of CNTs due to coating of the BN and CN films were analyzed by field-emission scanning electron microscopy (FE-SEM). The energy dispersive x-ray (EDX) spectroscopy and Raman spectroscopy were used to identify the existence of the coated layers (CN and BN) on CNTs. The electron-emission properties of the BN-coated and CN-coated CNT-emitters were characterized using a high-vacuum field emission measurement system, in terms of their maximum emission currents ($I_{max}$) at 1kV and turn-on voltage ($V_{on}$) for approaching $1{\mu}A$. The results showed that the $I_{max}$ current was significantly increased and the $V_{on}$ voltage were remarkably reduced by the coating of CN or BN films. The measured values of $I_{max}-V_{on}$ were as follows; $176{\mu}A$-500V for the 5nm CN-coated emitter and $289{\mu}A$-540V for the 2nm BN-coated emitter, respectively, while the $I_{max}-V_{on}$ of the as-grown (i.e., uncoated) emitter was $134{\mu}A$-620V. In addition, the CNT emitters coated with thin CN or BN films also showed much better long-term (up to 25h) stability behaviors in electron emission, as compared with the conventional CNT emitter.

• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.594-601
• /
• 2014

Rare-earth (RE) nitrides can be used as magnetocaloric materials in low temperature. They exhibit ferromagnetism and have Curie temperature in the region from 6 to 70 K. In this study, Holmium nitride (HoN) nano particles were prepared through plasma arc discharge technique and their magnetocaloric properties were studied. Nitrogen gas ($N_2$) was employed as an active element for arc discharge between two electrodes maintained at a constant current. Also, it played an important role not only as a reducing agent but also as an inevitable source of excited nitrogen molecules and nitrogen ions for the formation of HoN phase. Partial pressure of $N_2$ was systematically varied from 0 to 28,000 Pa in order to obtain single phase of HoN with minimal impurities. Magnetic entropy change (${\Delta}S_m$) was calculated with data set measured by PPMS (Physical Property Measurement System). The as-synthesized HoN particles have shown a magnetic entropy change ${\Delta}S_m$) of 27.5 J/kgK in applied field of 50,000 Oe at 14.2 K thereby demonstrating its ability to be applied as an effective magnetic refrigerant towards the re-liquefaction of hydrogen.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.223-228
• /
• 2018

본 논문은 동축 공동 공진기를 이용한 레인센서를 설계하고 제작한다. 선형적으로 빗방울을 감지할 수 있는 레인센서는 전압 제어 발진기 (VCO), 동축 공동 공진기, RF 스위치, RF 검출기, A / D 컨버터, DAC 및 마이크로 컨트롤러로 구성되었다. 설계된 레인 센서의 작동 주파수 범위는 2.5GHz ~ 3.2GHz이며, 입력 전압과 전류 소스는 24 [V / DC]와 1 [A]이다. 설계된 센서 회로는 VCO, RF 스위치, 고주파수 3GHz에서 소자의 주파수 특성을 변화시키는 RF 검출기를 포함한다. 센서 회로의 주파수 특성에 대한 오차를 교정한다. 이를 위해 공진기에 신호를 보내지 않고 RF 검출기로 신호를 직접 전달하는 기준 경로를 만든다. 시뮬레이션 및 측정 결과에 따르면 시뮬레이션된 공진기 주파수와 제작된 공진기 주파수 사이에 0-50MHz 차이가 있음을 알 수 있다.