• Physical Therapy Rehabilitation Science
• /
• 제7권4호
• /
• pp.172-178
• /
• 2018

Objective: The purpose of this study was to show the temporary effects of performing jumping lunges on a sand surface on static balance and dynamic balance. Design: Randomized controlled trial. Methods: Twenty healthy subjects volunteered in the study and was randomly assigned into either the sand group (n=10) or the control group (n=10). The subjects in the sand group performed jumping lunges on a sand surface and the subjects in the control group performed jumping lunges on a firm surface. The intervention was performed for 3 sets of 8 repetitions by both groups. To measure static balance, the force plate was employed to measure the center of pressure (CoP) area, and the CoP velocity during one-legged standing. Anterior, postero-medial, postero-lateral movements was assessed using the Star Excursion Balance Test (SEBT) to measure dynamic balance. Results: After the intervention, the sand group showed statistically significant improvements on all variables (CoP area, CoP velocity) in static balance (p<0.05). There were statistically significant changes in CoP area and CoP velocities between the two groups (p<0.05). In the sand group, there were significant improvements in the postero-medial and postero-lateral directions (p<0.05) except for anterior direction on dynamic balance. In the control group, there was a significant improvement in the postero-lateral and anterior directions (p<0.05). In comparison of the two groups, there was no statistically significant improvement in all variables. Conclusions: This study demonstrated that performing jumping lunges on a sand surface was effective in improving static and dynamic balance temporarily.

• 통합자연과학논문집
• /
• 제11권3호
• /
• pp.161-164
• /
• 2018

Over the past decade, mass spectrometry-based metabolomics, especially two dimensional gas chromatography mass spectrometry (GCxGC/TOF-MS), has become a key analytical tool for metabolomics data because of its sensitivity and ability to analyze complex biological or biochemical sample. However, the need to reduce variations within/between experiments has been reported and methodological developments to overcome such problem has long been a critical issue. Along with methodological developments, developing reasonable performance measure has also been studied. Following four numerical measures have been typically used for comparison: sensitivity, specificity, receiver operating characteristic (ROC) curves, and positive predictive value (PPV). However, more recently, such measures are replaced with F1 score in many fields including metabolomics area without any carefulness of its validity. Thus, we want to investigate the validity of F1 score on two examples, with the goal of raising the awareness in choosing appropriate performance comparison measure. We noticed that F1 score itself, as a performance measure, was not good enough. Accordingly, we suggest that F1 score be supplemented with other performance measure such as specificity to improve its validity.

• Journal of Mechanical Science and Technology
• /
• 제18권1호
• /
• pp.132-144
• /
• 2004

This paper presents a new method driving multiple robots to their goal position without collision. To consider the movement of the robots in a work area, we adopt the concept of avoidability measure. The avoidability measure figures the degree of how easily a robot can avoid other robots considering the velocity of the robots. To implement the concept to avoid collision among multiple robots, relative distance between the robots is proposed. The relative distance is a virtual distance between robots indicating the threat of collision between the robots. Based on the relative distance, the method calculates repulsive force against a robot from the other robots. Also, attractive force toward the goal position is calculated in terms of the relative distance. These repulsive force and attractive force are added to form the driving force for robot motion. The proposed method is simulated for several cases. The results show that the proposed method steers robots to open space anticipating the approach of other robots. In contrast, since the usual potential field method initiates avoidance motion later than the proposed method, it sometimes fails preventing collision or causes hasty motion to avoid other robots. The proposed method works as a local collision-free motion coordination method in conjunction with higher level of task planning and path planning method for multiple robots to do a collaborative job.

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.611-622
• /
• 2012

This study proposed two multisensor fusion methods for segment-based image classification utilizing a region-growing segmentation. The proposed algorithms employ a Gaussian-PDF measure and an evidential measure respectively. In remote sensing application, segment-based approaches are used to extract more explicit information on spatial structure compared to pixel-based methods. Data from a single sensor may be insufficient to provide accurate description of a ground scene in image classification. Due to the redundant and complementary nature of multisensor data, a combination of information from multiple sensors can make reduce classification error rate. The Gaussian-PDF method defines a regional measure as the PDF average of pixels belonging to the region, and assigns a region into a class associated with the maximum of regional measure. The evidential fusion method uses two measures of plausibility and belief, which are derived from a mass function of the Beta distribution for the basic probability assignment of every hypothesis about region classes. The proposed methods were applied to the SPOT XS and ENVISAT data, which were acquired over Iksan area of of Korean peninsula. The experiment results showed that the segment-based method of evidential measure is greatly effective on improving the classification via multisensor fusion.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.689-698
• /
• 1997

The purpose of this study is to develop the well-fitted brassieres by observing the changes in the breast sizes and shapes, the surface area and the volume of the breast through the arm movements of 3 types (0$^{\circ}$, 90$^{\circ}$ and 180$^{\circ}$) in vertical motion. The subjects are females, who are aged twenties and wearing a brassiere size 70B, In particular, to obtain the measures regarding the surface area and the volume of the breast, replicas are made at each motion. The results of this study are as follows: 1. The changes in the breast sizes and shapes at each motion By increasing the motions of the arm movement, the following measure items are inclined to decrease: Shoulder length, Side neck point~B.P., Front neck point~B.P., Horizontal length of the cup, Upper bust circumference, Bust circumference, Upper bust depth, Bust depth, Under bust depth, Nipple to tipple breadth, Horizontal distance of bust, Bust height, Cup size. By increasing the motions of the arm movement, the following measure items are inclined to increase: Center point of shoulder~B.P., Shoulder point~B.P., Armpit~ lowest point of breast drooping, Upper bust point~B.P., B.P~Under bust point, Under bust line, Width of gap between breast, Vertical distance of Bust. 2. The changes in the surface area and volume of breast at each motion By making the replica to observe changes in the surface area, which are sectioned to 4 parts(area 1 to area 4) , and volume of breast at each motion, the results are as follows: At 0$^{\circ}$ and 90$^{\circ}$, the sizes of each part are ordered as the following: area2> areal> area4> area3. At 180$^{\circ}$, the sizes of each part are ordered as the following: areal> area2> area4> area3. Through these orders, it is found that the upper and inside part of the breast has the inclination to increase so long as the motions of the arm movement increase. Also, the total surface area increases so long as the motions of the arm movement increase. The volume of the breast increase when the surface area of the breast increases. As a result of the F-test on the changes in the each surface areas, the surface area and volume by arm movements, the significant differences among the each surface areas and the surface area are not found.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.57-62
• /
• 2001

The study was conducted to measure the heavy metal pollution of soils at the playground for children and to investigate the characteristics of heavy metals distribution I city. The studied area was divided into two: the residential area and the industrial area. The samples of the sands and soils were collected from both areas. The results were obtained as follows. All average concentration of 6 different heavy metals was found to be lower than the standard of soil pollution. Zn, Pb and cu concentrations were higher than other species of heavy metals. The contents of heavy metals in the soil were higher than the sands. The average contents of Zn, Pb, Cu, As, Hg and Cd in soil were 38.36, 9.53, 7.31, 0.03, 0.18 and 0.09 mg/kg respectively. Comparing with the residential area, heavy metal concentrations of the industrial area were 4.60, 1.49, 2.60 and 4.29 times for Zn, Pb, Hg and Cd in soils, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.250-255
• /
• 2002

The transition between bridge and earthwork often causes the problems of maintenance. The damages of the track on the transition area influence running safety of train and serviceability, increase the maintenance cost. Therefore it is very important to evaluate the dynamic responses of transition and take a efficient measure. In order to evaluate the dynamic behavior of track, the field estimations are performed at the transition area of a conventional line between bridge and earthwork. And the track system on the transition area numerically analyzed to evaluate the dynamic behavior of damaged track with void sleeper. The measured values and Analysis results such as wheel contact force, rail stress, displacement acceleration and track irregularity in the transition area show the dynamic forces are severe. So it is recommended that the transition area should be improved the rigidity by reinforcing the rail.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.71-78
• /
• 2011

This parer proposes application of quality costing system in quality improvement area. Cost of quality in quality improvement area provides a valuable of both providing the need for improvement and giving a starting point for project. WQCMS(Web-based Q-Cost Management System) have ability to collect and analyze quality data generated from various different departments in the inside or outside of the enterprise without any limitations, if end-users are able to access wide area network. It provides the capability to integrate quality information from database and to generate various easy analysis reports to management's needs using built-in analysis tool modules with real-time. Web-based quality cost management system to measure the performance of quality improvement activities in the business firms. This paper proposes standard model for quality cost process in quality improvement area.

• 정보처리학회논문지B
• /
• 제13B권6호
• /
• pp.579-584
• /
• 2006

본 연구는 카운팅 정합도라 불리는, 비선형 정합도를 척도로 하는 템플릿 정합법을 이용하여 온-오프 형태 DNA칩의 탐색자를 구분하는 방법을 제안한다. 또한, 스팟 템플릿의 다양한 위치나 크기에 따른 응답의 최대값을 찾는 최대 응답 탐색법을 제안한다. 각 스팟의 교잡반응 여부만을 분류하는 온-오프 형태의 DNA 칩의 탐색자를 구분하는 용도에 제안된 방법을 적용하였다 2390명의 환자에 대한 인유두종 바이러스 DNA 칩 검사에 적용하여, 카운팅 정합도를 기존의 정규상관도나 메디안과 비교하였다. 카운팅 정합도가 최대 응답 탐색법에 관계없이 최고의 성능을 보였다. 실험결과 위치탐색을 결합한 카운팅 정합도가 가장 적절하였다.

• 간호행정학회지
• /
• 제4권1호
• /
• pp.19-31
• /
• 1998

The purpose of this study was to identify whether ethical values of nursing students are deontological or utilitarinian. The subjects of this study were consisted of 163 nursing students. The data was collected from September 3 to 30, 1997. Sub-scale of Nursing Ethical Values(Lee, 1990) were used to measure human life area, nurse-patient relationship area, nurse-nursing task relationship area, nurse-colleague relationship area. Data were analyzed by SPSS for Windows program. The results of this study were summarized as follows: 1. The students took the position of utilitarian slightly in human life area. 2. The students took deontological position slightly in nurse-patient relationships area. 3. The students took deontological position slightly in nurse-nursing task relationships area. 4. The students took deontological position greatly in nurse-colleague relationships area. 5. There were significant relationship between nurse-colleague relationship area and both human life area and nurse-patient relationship area(p< .01). 6. The ethical values of human life area related to religion(p< .01) and attitude of nursing(p< .05). The ethical values of nurse-colleague relationships area related to attitude of nursing(p< .01).