• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.16-22
• /
• 2012

With the increase of consumption of new renewable energy, the use of Electric Double Layer Capacitor(EDLC) is being gradually widened as the next generation energy storage device. In order to expand the market of EDLC which is recently receiving a lot of attraction as a new promising area, development of a charge/discharge cycle tester to measure and test performance, is essential. Therefore, this research designed a circuit to measure capacity and internal resistance and a circuit to measure voltage maintenance properties, based on EDLC's basic charging/discharging properties so it is able to measure the state of charge and discharge at high speed. When evaluating performance characteristics, the 5[V]/100[A] prototype-EDLC charge/discharge testing system developed for this research showed ${\pm}0.1$[%] of accuracy of voltage and current measurement. It was also proved that the developed charge/discharge testing system for EDLC can be applied to the actual industry, when testing the entire system using a program produced for data monitoring and acquisition.

• 센서학회지
• /
• 제15권6호
• /
• pp.411-416
• /
• 2006

This paper describes the development of a 3-axis finger force sensor to grasp an unknown object safely in an intelligent robot's hand. In order to safely grasp an unknown object, robot's hand should measure the weight of an object and the force of grasping direction simultaneous. But, in the published papers, the grippers and hands equippd with the force sensor that could only measure the force of grasping direction, and grasped objects using their sensors. These grippers and hands can't safely grasp unknown objects, because they can't measure the weight of it. Thus, it is necessary to develop 3-axis force sensor that can measure the weight of an object and the force of grasping direction for an intelligent gripper. In this paper, 3-axis finger force sensor to grasp an unknown object safely in an intelligent robot's hand was developed. In order to fabricate a 3-axis finger force sensor, the sensing elements were modeled using parallel plate beams, and the theoretical analysis was performed to determine the size of sensing elements, then the 3-axis finger force sensor was fabricated. Also, the characteristic test of the developed 3-axis finger force sensor was performed.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1505-1511
• /
• 2012

우리나라는 급격한 경제성장으로 주택, 공장, 공공용지 등 대량의 토지수요가 필요하게 되었으며 이에 따라 손실보상도 재산권보상에서 생활권보상으로 변화되어왔다. 본 논문은 실무상 생활대책제도의 문제점을 살펴보고 개선방안을 제시하고자 한다. 개선방안으로 첫째 토지보상법상 생활대책제도의 규정화, 둘째 양봉업과 같은 보상에 대한 요건 강화, 셋째 우선고용이나 취업알선, 직업훈련 등의 필요성을 제시하였다. 이러한 생활대책은 공영개발사업을 원활하게 할 수 있을 것이다.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.203-207
• /
• 2021

This study presents the development of dielectric constant sensors to measure lubricant properties. The lubricant oil sensor is used to measure oil properties and machine conditions. Various condition monitoring methods are applied to diagnose machine conditions. Machine condition monitoring using oil sensors has advantage over other machine condition monitoring methods. The fault conditions can be noticed at the early stages by the detection of wear particles using oil sensors. Therefore, it provides an early warning in the failure procedure. A variety of oil sensors are applied to check the machine condition. Among all oil sensors, only one sensor can measure the tendency of several properties such as acidity and water content. A dielectric constant sensor is also used to measure various oil properties; therefore, it is very useful. The dielectric constant is the ratio of the capacitance of a capacitor using that material as a dielectric to that of a similar capacitor using vacuum as its dielectric. The dielectric constant has an effect on water content, contaminants, base oil, additive, and so forth. In this study, the dielectric constant sensor is fabricated using MEMS process. In the fabrication process, the shape, gap of the electrode array, and thickness of the insulation material are considered to improve the sensitivity of the sensor.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6128-6134
• /
• 2012

부동산투자 패러다임의 변화 속에서 정교하고 투명하게 투자가치와 성과를 분석할 수 있는 기법의 도입이 절실히 필요하게 됐다. 본 연구에서는 합리적이고 타당한 투자의사결정을 하기 위하여 신뢰도 높은 투자가치분석의 핵심이 되는 재무적 타당성 분석방안을 찾고자 한다. 이를 위해 부동산 개발사업 사례와 자산관리사업 사례를 선정했다. 각 사례를 통해 손익이나 투자가치를 어떻게 분석했으며 변수에 따라 수익률과 현재가치가 어떻게 변화하는지 과정을 추적했다. 분석 결과, 기존에 발달해 온 여러 기법들을 실제 개발프로젝트에 직접 적용하기 위해서는 우선 해당 프로젝트에서 의사결정을 위해 가장 중요시되는 부분이 무엇인지 파악한 다음 여러 투자분석 기법들 가운데 가장 적절한 기법들을 복수로 선정한 뒤 각 투자분석기법의 단점을 보완할 수 있도록 대체적 및 보완적 기법들을 동원해 실제 투자가치분석에서 활용한다면 투자가치분석의 효율성과 신뢰성을 높일 것이라는 점을 발견했다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.351-364
• /
• 2009

As well as the development of the measurement of service quality, various kinds of service measurements are also being developed. Especially the mobile telecommunication service being representative to the mobile telecommunication company would be the mostly developed area. Its development can be understood along with the development of the telecommunication companies as well as cellular companies, not only the service alone. It is a differentiated phenomenon in the current research, such as the organic influence between the service quality and product. Of course there are such products placed on sale and enjoyed the common service, but at present there is another case that the product is on the market exclusively with the mobile company in here. This article is to estimate service efficiency for Mobile Communication and Cellular company. In this paper, We tried to measure the service quality and overall satisfaction by using Data Envelopment Analysis(DEA), degree of combination and top2box which is a little bit different methodology from traditional ones. This paper uses CCR model in DEA to measure service efficiency in the Mobile Communication.

• 대한인간공학회지
• /
• 제17권1호
• /
• pp.79-89
• /
• 1998

This study describes the research contents, strategies, and applications of simulator for measuring and evaluating human sensibility. The simulator is the integrated experiment facility which can change the physical environment artificially to measure and grasp the reaction feature of human sensibility for the products and environments. The design technique consists of two parts; development of technique to present the mock environment related to sensibility elements and development of software to measure and evaluate sensibility physiologically and psychologically. The simulator can be utilized for evaluating the main industrial products and environments. Therefore, the simulator can increase the added-value of the product and environment, and also contribute to the improvement of quality of human life.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.262-267
• /
• 2000

This paper describes a weight in motion(WIM) sensor to measure the weight of a vehicle in motion. The main sensing element of the WIM sensor is the PVDF(Polyvinylidene fluoride) film that shows rapid response to an external excitation. Due to the property of rapid response, it is possible to measure the weight of a vehicle in motion with high speed. In the development of the WIM sensor, the dominant target value was the uniformity of the sensor. To increase the uniformity, We employed shrinkable tube made of rubber to enhance the uniformity, and performed the rolling of the brass tube repeatedly. The uniformity of the sensor was examined experimentally. It was comparable to that of a WIM sensor of the MSI which was the benchmark of this development. This paper also describes the mechanical modeling of the sensor and the suitable charge amplifier for the sensor.

• 소성∙가공
• /
• 제11권7호
• /
• pp.620-627
• /
• 2002

The purpose of this paper is the development of an automated measurement system for micro spring based on the digital image processing technique. This micro spring can be used in various engineering applications such as filament, load bearing springs, hard disk suspension and many others. Main functionality of the micro spring inspection system is to measure the representative pitch of the micro spring. The derivative operators are used for edge detection in gray level image. Measurement system developed in this paper consisted of new auto feeding mechanism to take advantage of air pressure. In the process of development of the micro spring inspection system based on the image processing and analysis, strong background technology and know-how have been accumulated to measure micro mechanical parts.

• 컴퓨터교육학회논문지
• /
• 제20권6호
• /
• pp.17-25
• /
• 2017

2015 개정 교육과정이 현장 학교에 성공적으로 안착할 수 있도록, 국가차원에서 2015, 2016년에 68개의 SW연구학교를 운영하고 SW교육의 효과성을 측정하기 위한 검사도구가 개발되었다. 본 연구는 기존에 개발된 컴퓨팅 사고력 검사 도구 분석을 통해 2018년부터 실시되는 교육과정의 효과성을 검증할 수 있는 컴퓨팅 사고력 검사도구의 방향성을 제시하는 것에 목적이 있다. 분석결과, 기존에 사용된 검사도구는 컴퓨팅 사고력 기반의 문제해결과정을 측정하기 위한 능력요소의 타당성은 부족하였다. 문항특성 분석 결과, 변별도는 양호하였으나, 난이도는 쉬운 문항의 비율이 높아 학생들의 역량을 정확히 측정하기는 부족하였다. 결과를 토대로 본 연구는 컴퓨팅 사고력 기반의 문제해결과정을 고려한 문항개발, 학생들의 경험적 지식 활용, 실생활의 소재로 사고력의 흐름을 확인할 수 있는 구성을 제안하였다.