• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.56-63
• /
• 2012

Environment has become a main issue nowadays. People began to show big interest in "futuristic means of transportation", which is an efficient method in $CO_2$ emissions reduction and decreasing use of oil. Due to the noise and emissions of two-wheel vehicle of internal combustion engine, electric two-wheeled vehicles have been supplied in downtown. The electric two-wheeled vehicles use battery as power source. The performance of lithium-ion battery changes as the ambient temperature changes. In this paper, analysis of performance variance of electric two-wheeled vehicles influenced by the temperature using the chassis dynamometer and the environmental chamber was carried out.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.67-75
• /
• 1996

An innovative batch electrolytic system consisted of electrolytic basin, which was equipped with DSA(Dimensionally Stable Anode) type insoluble electrode, Ti/IrO2 anode and H-C metal cathode, and flotation separator was developed for the efficient treatment of shipboard emulsified oily wastewater. The electorod cleance and current density of elecrolytic basin to ensure maximum treatment efficiency of oily wastewater was evaluated as 6 mm, 3 A/dm3, respectively. The electrolytic efficiency of oily wastewater was affected by the operationtemperature, and it means that the temperature controller to ensure the stabiity of the process is required. The conductivity in the electrolytic basin was increased with the percentage of sea water in the oily wastewater, and over 90% of treatment efficiency of oily wastewater could be obtained at 7% of sea water. The oil removal rate was increased according to the increase of the quantity of electricity, and the maximum value of electrilyic rate constant was 288 mgoil/A.min. The information obtained from this study might be used for development of an efficient continuous electrolytic system treating the emulsified oily wastewater.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.5
• /
• pp.85-90
• /
• 2012

In this paper, it was investigated experimentally that diameter and polarity variation of corona wire electrode affected to ozone generation of the ozone generator using a wire-to-plate type electrode. The change in the diameter(D) of the corona wire electrode has a great effect upon ozone generation, higher influence appears in the positive corona discharge than the negative corona discharge. In the case of D=0.50[mm], maximum ozone generation and power efficiency could be obtained. However, in the case of smaller D than this, the ozone generation and efficiency decreases slowly and in the case of larger D, the ozone generation decreases rapidly. It means performance decline as an ozone generator. Therefore, ozone generation and power efficiency would increase through simple optimization of the corona electrode specification.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2066-2073
• /
• 2021

The use of nuclear reactors is a large studied possible solution for thermochemical water splitting cycles. Nevertheless, there are several problems that have to be solved. One of them is to increase the efficiency of the cycles. Hence, in this paper, a thermal energy optimization of a Sulfur-Iodine nuclear hydrogen production cycle was performed by means a heuristic method with the aim of minimizing the energy targets of the heat exchanger network at different minimum temperature differences. With this method, four different heat exchanger networks are proposed. A reduction of the energy requirements for cooling ranges between 58.9-59.8% and 52.6-53.3% heating, compared to the reference design with no heat exchanger network. With this reduction, the thermal efficiency of the cycle increased in about 10% in average compared to the reference efficiency. This improves the use of thermal energy of the cycle.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.673-694
• /
• 2021

In this paper, we intend to study the energy efficiency (EE) optimization for a simultaneous wireless information and power transfer (SWIPT)-based distributed antenna system (DAS). Firstly, a DAS-SWIPT model is formulated, whose goal is to maximize the EE of the system. Next, we propose an optimal resource allocation method by means of the Karush-Kuhn-Tucker condition as well as an ergodic method. Considering the complexity of the ergodic method, a suboptimal scheme with lower complexity is proposed by using an antenna selection scheme. Numerical results illustrate that our suboptimal method is able to achieve satisfactory performance of EE similar to an optimal one while reducing the calculation complexity.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.2
• /
• pp.108-120
• /
• 2002

This study analyzed the managerial efficiency of 11 organizations, the branch centers of a occupational health service organization in Korea, using the Data Envelopment Analysis (DEA) method. The DEA is a good method for evaluating health services since it can handle multiple inputs and outputs simultaneously, and also identify the sources and amount of inefficiency. The author approached this study using two efficient models: the monetary value model and the real value model. The DEA method based on the monetary value model included cost factors, while the real value model excluded cost factors. The input variables used were manpower of physicians, medical technicians, nurses, industrial hygienists and administrators; labor, maintenance, and material expenses. The output variables used were the number of medical examinations, workplace evaluations, group health management services and income from each service. The major results were as follows: First, in the monetary value model, 6 out of 11 organizations (54.6%) showed an efficiency score of 1.0, which means that they have been operating in very efficient ways. However, 5 organizations (46.4%) showed themselves to be relatively inefficient. Second, in the real value model, 7 out of 11 organizations (63.4%) showed an efficiency score of 1.0, which means they have been operating efficiently, while 4 organizations (46.4%) showed themselves to be relatively inefficient. Third, the reliability of DEA method were analyzed by comparing the results of the monetary value model and real value model. The results of 8 out of 11 organizations were same in terms of being efficient or not. Thus, the DEA could be a valid application method for occupational health service organizations. Fourth, the organizations that displayed common inefficiency in both the monetary value model and in the real value model 3, 9, and 10, were also considered to be managed inefficiency from expertise opinion. In summary, this study evaluated the efficiency of occupational health service organizations applying the DEA method with different variables, and found that the results of analysis could be valid in terms of both modeling and expert sense. In the future, the DEA method will be used as a useful tool to identify and evaluate the efficiency of occupational health service organizations through more applications and refinements.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.77-104
• /
• 2014

Government R&D support for SMEs is very important and the R&D budget is also increasing. This study suggests a new method for analyzing a performance of R&D programs and analyzes the performance of R&D programs funded by small & medium business administration using the method. We discuss new measures "efficiency" that means short-term performance and "effectiveness" that means long-term performance. Weights based on the R&D programs' characteristics among the various sub-indicators of two measures were derived, and then the final scores were calculated by combining the weights with the responses on the indicators. Finally, this study tests the mean differences between R&D programs statistically. As a results, efficiency of R&D programs shows a significant difference between the R&D programs, while effectiveness does not. Most of the efficiency scores are low, whereas the effectiveness scores are high. The results explain that the R&D programs are managed inefficiently. However, most SMEs predict a positive impact of government R&D supports on effectiveness in the long term. Government needs to try to improve the efficiency of R&D supports because SMEs cannot expect sustainable performance with no improvement in efficiency.

• Journal of Information Technology Applications and Management
• /
• v.27 no.1
• /
• pp.1-13
• /
• 2020

This study aims to measure the efficiency and productivity change of 30 domestic construction companies from 2010 to 2018 using data envelopment analysis(DEA) and Malmquist productivity index (MI). In particular, we used the number of employees, capital stock, and non-current assets as input variables, and sales and net income as ouput variables for the analysis. The dataset used for the analysis of efficiency and productivity changes is the employee profile and financial statements for the companies from 2010 to 2018. We found that the MI of the 30 companies is greater than one since 2013. This is because many years of TEC (Technical Efficiency Change) is greater than 1, which means that the productivity index increases as the TEC increases. In addition, the MI value was less than 1, which lowered the productivity of construction firms in 2018. The results of the study may help decision makers to find effective future management plans by analyzing the internal and external factors.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.395-403
• /
• 2013

Fishing efficiency of the squid jigging vessel using the LED and metal halide fishing lamp combination was analyzed to reduce the cost for fishing operation utilizing the fishing light system for high degree of efficiency in the squid jigging fishery (one of the representative coastal and offshore fisheries in Korea). This study aims to improve the nature of existing LED lamps and to develop fan-shaped LED lights having 180W of power and ${\pm}45^{\circ}$ angle of light intensity distribution. The marine experiment for making a comparison of their fishing efficiency was tested by a 9.77 tons fishing vessel from Oct. through Dec. 2012. As a result, experimental fishing vessel showed slightly higher fishing efficiency than the average of metal halide lamp-equipped vessel and 20% energy savings. This means that the combination of LED and metal halide lamps would provide an efficient way to lower energy consumption while maintaining fishing efficiency.