• Journal of Korean Foot and Ankle Society
• /
• v.6 no.2
• /
• pp.139-143
• /
• 2002

Purpose: We analyzed the Metatarso-Phalangeal Oblique Angle(MPOA) of Diabetic foot. Materials and methods: We studied retrospectively 60 cases of diabetic foot in 52 patients, for the evaluation of the correlations between clinical outcomes and radiologic findings in the conservative management group (Group A; 36 cases) and the major operation group (Group B; 24 cases). We measured MPOA on AP view. The MPOA was defined as the intersection angle of the Metatarso-Phalangeal Break Line (a line passing from the second to fifth metatarsal heads) and the long axis of foot in sagittal plane. We performed the statistical analysis between MPOA and clinical outcomes. by independent t-test. Results: The mean of MPOA in group B, $70.79^{\circ}$ (range: $62.8^{\circ}-81.3^{\circ}$), was significantly higher than that in group A, $68.04^{\circ}$ (range: $62.0^{\circ}-76.4^{\circ}$). The mean of MPOA in patients of fore foot lesions(30 cases), $71.30^{\circ}$ (range: $62.0^{\circ}-71.5^{\circ}$), was significantly higher than that in patients of hind foot lesions(30 cases), $66.97^{\circ}$(range: $62.8^{\circ}-81.3^{\circ}$). Conclusions: We recognized the MPOA might be useful simple parameter in assessing the diabetic foot.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.380-385
• /
• 2006

In this paper, a program that can be utilized to measure and analyze radio propagation characteristics is developed. This program is able to control the measurement instruments including spectrum analyzer through GPIB interface and analyze the measured data to yield mean excess delay and RMS delay spread. The measured path loss can be compared with theoretical value in free space or inside a tunnel. The measured and analyzed results can also be presented in the forms of graphs. As these tasks can be conducted on the spot of the measurements, this program is very helpful in performing and verifying the measurements immediately. In this thesis radio propagation characteristics with frequency bands of 2.45 and 5.8GHz in subway tunnels are measured by using the program. Path loss and delay spread in subway tunnel is measured and compared according to the form of antenna beam and LOS(Line of Sight) and N-LOS(Non-Line of Sight).

• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.333-342
• /
• 2021

PURPOSE. To evaluate the impact of five different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium (CoCr) crowns produced by computer-aided designing (CAD) and selective laser melting (SLM) processes. MATERIALS AND METHODS. Five preparation data were constructed, after which design crowns were obtained. Actual crowns were fabricated using an SLM process. After the data of actual crowns were obtained with structural light scanning, intaglio surfaces of the design crown and actual crown were virtually superimposed on the preparation. The fit-discrepancies were displayed with colors, while the root means square was calculated and analyzed with one-way analysis of variance (ANOVA), Tukey's test or Kruskal-Wallis test (α = .05). RESULTS. The marginal or internal color-coded images in the five design groups were not identical. The shoulder-lip and sharp line angle groups in the CAD or SLM process had larger marginal or internal fit discrepancies compared to other groups (P < .05). In the CAD process, the mean marginal and internal fit discrepancies were 10.0 to 24.2 ㎛ and 29.6 to 31.4 ㎛, respectively. After the CAD and SLM processes, the mean marginal and internal fit discrepancies were 18.4 to 40.9 ㎛ and 39.1 to 47.1 ㎛, respectively. The SLM process itself resulted in a positive increase of the marginal (6.0 - 16.7 ㎛) and internal (9.0 - 15.7 ㎛) fit discrepancies. CONCLUSION. The CAD and SLM processes affected the fit of CoCr crowns and varied based on the preparation designs. Typically, the shoulder-lip and sharp line angle designs had a more significant effect on crown fit. However, the differences between the design groups were relatively small, especially when compared to fit discrepancies observed clinically.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The comprehensive evaluation for rock cleavages was performed through the combination of the 16 parameters derived from the enlarged photomicrographs of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the above parameters can be classified into group I (spacing frequency (N), total spacing ($1m{\geq}$), constant (a), exponent (${\lambda}$), slope of exponential straight line (${\theta}$), length of line (oa') and trigonometric ratios ($sin{\theta}$, $tan{\theta}$) and group II (mean spacing (Sm), difference value between mean spacing and median spacing (Sm-Sme), density (${\rho}$), lengths of lines (oa and aa'), area of a right-angled triangle (${\Delta}oaa^{\prime}$) and trigonometric ratio($cos{\theta}$). The values of the 8 parameters belonging to group I show an order of H(hardway, H1+H2)

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.137-152
• /
• 2004

The climatological characteristics of coastal zone over the southwestern coast of Korea peninsula were investigated using the data observed by AWS (automatic weather system) and 4 buoy points. Coastal zone is climatologically defined as the region bounded by the distinct contrast of temperature gradient and wind speed across coastline. In the southwest of peninsula four cross-lines consisted of AWS aligned with each buoy were selected as Geojedo buoy line, Geomundo buoy line, Chilbaldo buoy line and Dukjukdo buoy line. Analysis on the diurnal cycle and intra-month variation, monthly mean and maximum value, the temperature gradient with distance between buoy and each station and the accumulative frequency of wind speed were applied to find out the characteristics and the range of coast zone. The maximum ranges of coastal zone vary from offshore to Sanglim (about 34 km distance from coastline) for Geojedo buoy line, to Sunchun (about 52 km) for Geo-mundo buoy line, to Jaeundo (about 27 km) for chilbaldo buoy line and to Yongin (about 65 km) for Dukjukdo buoy line. The modification of coastal zone according to synoptic flow was investigated for the onshore, off-shore and calm cases. The ranges of coastal zone are significantly changed with the distance between 65∼90 km for the case of onshore. In addition, we tried to find out the variation of the wind and temperature and the wind ratio of wind speed at ocean to land stations along Geojedo buoy line during 12∼13 Sep. 2003 affected by typhoon (MAEMI).

• Journal of Global Scholars of Marketing Science
• /
• v.13
• /
• pp.71-88
• /
• 2004

Although the factors that affect the width of latitude of price acceptance is well documented, the attempt to develop a practice-oriented methodology to calibrate the region of price insensitivity (i.e., a latitude of price acceptance) for a given individual brand has been relatively rare. The researcher aims to try to full this gap by developing a conjoint analysis-based procedure that can be applied to many industries. Furthermore, we examine the difference in the latitude of price acceptance between on- and off-line transaction in stock industry in Korea. The conjoint analysis-based procedure was applied to measure the disaggregate price response curve for individual stock investment both on- and off line transaction channel. The curves from the samples enable us to estimate the individual choice probabilities corresponding to applied price points. Using t-test the differences in mean choice probabilities between the list price and another price point were tested, through which we can get the latitude of price acceptance for a given brand in stock market. These procedures were tested in on- and off-line stock market in South Korea. The results showed that investors on off-line channel have wider latitudes of price acceptance than the investors on on-line transaction system.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.1
• /
• pp.31-37
• /
• 2021

Purpose: Acetaminophen (APAP) is a widely available drug responsible for a large part of drug-induced hepatotoxicity in developed countries. Although acetaminophen overdose cases in Korea are being continuously reported, there are no reports related to the level of this drug in the patient's blood or of laboratory analysis at emergency departments (ED). This study sought to analyze the acetaminophen overdose cases at a toxicological laboratory and to survey APAP analysis services offered at select EDs. Methods: We analyzed the demographic and analytic data at a toxicological laboratory run by the National Emergency Medical Center (NMC) in 2019-2020. We surveyed the APAP laboratory service in the 38 regional emergency medical centers (EMCs) and 68 local EMCs near the toxicological laboratory. Results: We studied 175 acute poisoning cases (112 women) with positive blood APAP results (mean age 47.0±24.1 years). Suicide attempts comprised 40.0% of the cases and 30.3% APAP overdose events. In the univariate analysis, we observed that patients were significantly younger, with fewer underlying medical diseases. There were a higher number of APAP overdose events, more favorable initial mental status, more toxic quantity intake in the above treatment line group (p<0.05), In multivariate analysis, the toxic amount intake was significantly more frequent in the above treatment line group (p<0.01). Hospital APAP analysis services were available in six EMCs (3/38 regional and 3/68 local). The hospital blood APAP level reporting intervals were shorter than outside-hospital laboratory services (p<0.01, regional 7.0±3.0 vs. 40.6±27.5, local 5.3±3.1 vs. 57.9±45.1 hours). The NMC toxicological laboratory reporting interval was shorter than the other outside-hospital laboratories (p<0.01, regional 5.7±0.6 vs. 50.2±22.7 local 7.5±3.0 vs. 70.5±41.5 hours). Conclusion: Over the treatment line group, toxic amount intake was significantly more frequent. Only six of 106 EMCs have their own APAP analysis service in their hospitals.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.284-291
• /
• 2008

This study presents an aerodynamic design and numerical analysis of a centrifugal compressor in gas turbines for SOFC-gas turbine hybrid system application. Total-to-total pressure ratio of the compressor is 3.6:1 that could be used widely for small and large SOFC-gas turbine systems. The compressor consists of a centrifugal impeller and a wedge diffuser. Conceptual design and aerodynamic design with mean line analysis and quasi-3D analysis are performed, and aerodynamic parameters as well as design variables are discussed from the design results. A numerical analysis based on the Reynolds-averaged Navier-Stokes equation was performed for the flow analysis of the compressor. The results show that the centrifugal compressor designed meets the design target, and the aerodynamic parameters and results of the compressor can be used for the aerodynamic design of centrifugal compressors and the feasibility study of SOFC-gas turbine system design.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.38-38
• /
• 2015

Throughout the world, clubroot disease is one of the most damaging diseases affecting Brassica oleracea. In order to perform QTL analysis of CR (clubroot resistance) loci in B. oleracea, we constructed a map, and analyzed CR-QTLs using the mean phenotypes of F3 progenies from the cross of a resistant double-haploid cabbage line (Anju) with a susceptible double-haploid broccoli line (GC). We identified one major QTL, pb-Bo(Anju)1 in C2 from Anju and four minor QTLs; pb-Bo(GC)1 in O5 from GC, pb-Bo(Anju)2, -3, -4 in C2, C3, and C7 from Anju, respectively. Additionally, we found that the accumulation of Pb-Bo(Anju)1 allele and the minor CR-QTLs is essential for resistance against various six isolates. Our finding markers closely linked to the CR-QTLs will help marker-assisted selection for CR. At present, we are undergoing toward map-based cloning for Pb-Bo(Anju)1 gene. The preliminary experiment delimited Pb-Bo(Anju)1 locus, encompassing among 450kB.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.28-38
• /
• 1997

Previously, we have proposed the M-BECM(Modified-Band Edge Component Maximization), which is a symbol synchronization algorithm based on spectral line method for all-digital high speed digital communications. However, Until now, the characteristics of the timing detector based on the spectral line method including M-BECM was not analyzed, particularly the effect of a timing offset at the optimal convergence pont. In this paper, we analyze the timing dtector's characteristics of the M-BECM and present optimal design value. First, the expression for the timing detector's mean value(often called its S-Curver) as a function of the normalized symbol timing offset is derived. Next, the P $D_{bias}$, the value for compensating the timing offset at an optimal convergence point, and the bandwidth of bandpass filter in the timing detector are calculated. It is also shown and analyzed that the P $D_{bias}$ is affected by varuous factors such as the excess bandwidth of input signal, frequency offsets, noise and particularly, the excess bandwidth of input signal is a major parameter to decide P $D_{bias}$. Finally, analytic resutls are compared to simulation results.