• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.2
• /
• pp.148-155
• /
• 2005

An accurate prediction of blooming date is crucial for many authorities to schedule and organize successful spring flower festivals in Korea. The Korea Meteorological Administration (KMA) has been using regression models combined with a subjective correction by forecasters to issue blooming date forecasts for major cities. Using mean monthly temperature data for February (observed) and March (predicted), they issue blooming date forecasts in late February to early March each year. The method has been proved accurate enough for the purpose of scheduling spring festivals in the relevant cities, but cannot be used in areas where no official climate and phenology data are available. We suggest a thermal time-based two-step phenological model for predicting the blooming dates of spring flowers, which can be applied to any geographic location regardless of data availability. The model consists of two sequential periods: the rest period described by chilling requirement and the forcing period described by heating requirement. It requires daily maximum and minimum temperature as an input and calculates daily chill units until a pre-determined chilling requirement for rest release. After the projected rest release date, it accumulates daily heat units (growing degree days) until a pre- determined heating requirement for flowering. Model parameters were derived from the observed bud-burst and flowering dates of cherry tree (Prunus serrulata var. spontanea) at KMA Seoul station along with daily temperature data for 1923-1950. The model was applied to the 1955-2004 daily temperature data to estimate the cherry blooming dates and the deviations from the observed dates were compared with those predicted by the KMA method. Our model performed better than the KMA method in predicting the cherry blooming dates during the last 50 years (MAE = 2.31 vs. 1.58, RMSE = 2.96 vs. 2.09), showing a strong feasibility of operational application.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.111-117
• /
• 2008

We estirmted the yearly and monthly variation in discharge from the Nakdong River Barrage. We studied the total monthly discharge, the mean daily discharge, and the maximum daily discharge based on the observational discharge data for the 11-year period 1996-2006. We also examined the correlation between the discharge and the meteorologiml factors that influence the river inflow. The results from this study are as follows. (1) The total monthly discharge for 11 years at the Nakdong River Barrage was $224,576.8{\times}10^6\;m^3$: The daily maximum was in 2003, with $56,292.3{\times}10^6\;m^3$. The largest daily mean release discharges occurred in August with $52,634.2{\times}10^6\;m^3$ (23.4% of the year), followed by July and September in that order with 23.1 and 17%, respectively. (2) The monthly pattern of discharge could be divided into the flood season for the period July-September (discharge =$1000{\times}10^6\;m^3$/day), the normal season from April to June and October (discharge=$300{\times}10^6\;m^3$/day), and the drought season from December to March (discharge < $300{\times}10^6\;m^3$/day). (3) Periods of high temperature, low evaporation loss, and short sunshine duration produced a much higher discharge in general. Conditions of low rainfall and high evaporation loss, as was the rose in 2003, tended to reduce the discharge, but high rainfall and low evaporation loss tended to increase the discharge as it did in 200l. (4) The dominant wind directions during periods of high discharge were NNE (15.5%), SW and SSW (13.1%), S(12.1%), and NE (10.8%) This results show that it run bring on accumulation of fresh water when northern winds are dominant, and it run flow out fresh water toward offslwre when southern winds are dominant.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.665-679
• /
• 2015

Yearly mean temperature in the 29 lakes surveyed ranges from 12.6 (Suncheon) to 13.9℃ (Mokpo), the lowest in −2.7℃ (January) and the highest in 25.9℃ (July). Monthly mean the amount of rainfall recorded the highest of 336.7 mm in August and the lowest with 4.9 mm in January. A total of 424 species of phytoplankton were identified. They were 157 Chlorophyceae, 161 Bacillariophyceae, 39 Cyanophyceae, and 67 other algal taxa. The phytoplankton diversity were low in stream type reservoirs such as Guemho, Youngsan and Youngam. The population density of phytoplankton ranged from 19 to 53,161 cells/ml. Annual mean of total zooplankton abundance in 45 sites was 369±827 ind./L (n=180). Rotifers were the most common taxa and their relative abundance was high (65~77%). The benthic microinvertebrate fauna of 10 reservoirs of Jeonnam province were 71 species of 61 genera of 44 families of 16 orders of 7 classes of 4 phyla. Aquatic insects of Phylum Arthropoda were 50 species of 44 genera of 28 families of 6 orders. The number of individuals was 6,132. Diptera was highiest (41.3%), and Ephemeroptera (31.0%), Trichoptera (17.5%), Anellida (3.8%), Mollusca (3.3%), Crustacea (0.4%). Large hydrophytes were identified 32 taxa, 2 varieties 30 species 26 genera and 20 families. Especially, Jijung and Juam lakes require management such as physical remove of this ecosystem disturbance field plants. Fishes were identified total 44 taxa, such as 25 Cyprinidae (56.8%), 8 Cobitidae (17.0%), 3 Gobiidae (6.4%), 2 Bagridae (4.3%), 2 Osmeridae (4.3%), 2 Odontobutidae (4.3%), 2 Centrachidae (4.3%), 1 Siluridae (2.1%), and 1 Centropomidae (2.1%). A pale chub was dominant species (18.9%).

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.213-222
• /
• 2018

We investigated seasonal variations in the abundance of the adults and the resting eggs of copepods to understand the role of copepod resting eggs for maintaining their population inhabiting the coastal area of Dadaepo, Korea. Adults and resting eggs of copepods were collected bi-monthly with a conical net (45 cm mouth diameter, $330{\mu}m$ mesh size) and van Veen grab ($0.1m^2$ area), respectively, from October 2016 to September 2017. The species of resting eggs were identified using mtCOI gene. The mean abundance of copepods was highest in October ($3686{\pm}1190inds{\cdot}m^{-3}$) and lowest in January ($176{\pm}60inds{\cdot}m^{-3}$) with the dominance of Paracalanus parvus s.l.. Among copepod producing resting eggs, Acartia omorii and Centropages abdominalis were dominant. The mean abundance of resting eggs was the highest in July ($9148{\pm}6787eggs{\cdot}m^{-2}$) and the lowest in October ($530{\pm}348eggs{\cdot}m^{-2}$). Most of the collected resting eggs were identified as A. omorii's. The mean abundances of A. omorii adults and resting eggs were highest in July, and both abundances fluctuated in a similar pattern except in September. In September, A. omorii adults were observed in a state of low abundance, while their resting eggs occurred in a state of high abundance. These results suggest that A. omorii maintain their population by producing a large quantity of resting eggs, particularly diapause eggs, before the seawater temperature rises. These eggs would hatch and be newly recruited to their population when the environmental condition becomes favorable.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.34-37
• /
• 2019

BACKGROUND: A region can be divided into agroclimatic zones based on homogeneity in weather variables that have greatest influence on crop growth and yield. The agro-climatic zone has been used to identify yield variability and limiting factors for crop growth. This study was conducted to classify agro-climatic zones in the state of Mato Grosso in Brazil for predicting crop productivity and assessing crop suitability etc. METHODS AND RESULTS: For agro-climatic zonation, monthly mean temperature, precipitation, and solar radiation data from Global Modeling and Assimilation Office (GMAO) of National Aeronautics and Space Administration (NASA, USA) between 1980 and 2010 were collected. Altitude and vegetation fraction of Brazil from Weather Research and Forecasting (WRF) were also used to classify them. The criteria of agro-climatic classification were temperature in the hottest month ($30^{\circ}C$), annual precipitation (600 mm and 1000 mm), and altitude (200 m and 500 m). The state of Mato Gross in Brazil was divided into 9 agro-climatic zones according to these criteria by using matrix classification method. CONCLUSION: The results could be useful as information for estimating agro-meteorological characteristics and predicting crop development and crop yield in the state of Mato Grosso in Brazil.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.2
• /
• pp.71-79
• /
• 2023

The quantification of soil respiration rates is important to understand carbon cycles of forest ecosystems. Soil respiration rates were assessed using Li-8100A soil flux system in one evergreen broadleaved (Quercus glauca Thunb.) and two coniferous (Cryptomeria japonica D. Don and Chamaecyparis obtusa Endl.) stands from May 2020 to April 2022 in southern Korea. Monthly variations of soil respiration rates were higher in the Q. glauca stand than in the C. japonica and the C. obtusa stands. The mean soil respiration rates were significantly higher in the Q. glauca stand (2.63µmol m^-2 s^-1) than in the C. japonica (0.93µmol m^-2 s^-1) and C. obtusa (0.99µmol m^-2 s^-1) stands. The three stands showed exponential relationships between soil respiration rates and soil temperature (R² = 0.44-0.80). The sensitivity of temperature (Q10 values) to soil respiration rates was highest in the Q. glauca stand (5.13), followed by the C. obtusa (3.10) and C. japonica (2.58) stands. These results indicate that soil respiration rates can be increased more in evergreen broadleaved stands than in coniferous stands under enhanced soil temperature.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.208-218
• /
• 2001

We have investigated the gonad index (GI), gonadal development, reproductive cycle, first sexual maturity, sex ratio, the number of spawned eggs and spawning frequency of the Manila clam, Ruditapes philippinarum. Samples were collected from the intertidal zone of Komso Bay, Korea from January to December in 1999. Monthly changes in the gonad index (GI) and condition index showed a similar pattern in the reproductive cycle. The spawning period was once a year between early June and early October, there was a spawning peak between July and August when seawater temperature was over $20^{\circ}C$. The reproductive cycle of this species can be categorized into five successive stages; early active (February to March), late active (April to May), ripe (April to August), partially spawned (June to October), and spent/inactive stage (August to March). Percentages of first sexual maturity of female and male clams of l5.1-20.0mm in shell length were $56.3\%$ and $60.0\%$, respectively, and $100\%$ for the clams >25. mm. The sex ratio of individuals >15.1 mm in shell length was about 1:1 $(\chi^2= 0.02,\;p>0.05)$. Number of the eggs released from each clam by the induction increased as the size of clam in terms of shell length increased. Mean number of the eggs from the second induction of the spawning was $75.35-84.30\%$ $(average\;79.81\%)$ of the number of the eggs released in the first spawning. Our data indicated that R. philippinarum in Komso Bay has one major spawning peak with over two minor spawning, and the interval of each spawning was estimated to be approximately 15-17 (average 16.5) days.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.409-431
• /
• 2014

In this study, the characteristics in the simulation of high-resolution coastal weather, i.e. sea surface wind (SSW) and significant wave height (SWH), were studied in a southeastern coastal region of Korea using the WRF and SWAN models. This analyses was performed based on the effects of various input factors in the WRF and SWAN model during M-Case (moderate days with average 1.8 m SWH and $8.4ms^{-1}$ SSW) and R-Case (rough days with average 3.4 m SWH and $13.0ms^{-1}$ SSW) according to the strength of SSW and SWH. The effects of topography (TP), land cover (LC), and sea surface temperature (SST) for the simulation of SSW with the WRF model were somewhat high on v-component winds along the coastline and the adjacent sea of a more detailed grid simulation (333 m) during R-Case. The LC effect was apparent in all grid simulations during both cases regardless of the strength of SSW, whereas the TP effect had shown a difference (decrease or increase) of wind speed according to the strength of SSW (M-Case or R-Case). In addition, the effects of monthly mean currents (CR) and deepwater design waves (DW) for the simulation of SWH with the SWAN model predicted good agreement with observed SWH during R-Case compared to the M-Case. For example, the effects of CR and DW contributed to the increase of SWH during R-Case regardless of grid resolution, whereas the differences (decrease or increase) of SWH occurred according to each effect (CR or DW) during M-Case.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4195-4205
• /
• 1976

The purpose of this study is to evaluate the existing methods for calculating or estimating the consumptive use (Evaportranspiration) of any agricutural development project area. In determing the consumptive use water in the project area, there will require the best way for estimating irrigation requirement. Many methods for computing the evaportranspiration have been used, each of them with its merits and demerits at home and abroad. Some of these methods are listed as follows: 1.The Penman's formula 2.The B1aney-Criddle method 3.The Munson P.E. Index method 4.The Atmometer method 5.The Texas Water Rights Commission (TWRC) method 6.The Jensen-Haise method 7.The Christiasen method Therefore, the authors will introduce the more widely used method for calculating Consumptive Use by G.H. Hargreaves. The formula is expressed in the form Ep= K·d·T (1.0-0.01·Hn) Hn=1.0+0.4H+0.005H2. This method was adopted for the first time to determine the Irrigation requirements of Ogseo Comprehensive Agricultual Development project (Benefited area:100,500ha) in Korea. This method is presented in somewhat greater detail than the others. Formula is given for the computation of evaportranspiration (with various levels of data availability) Sampel computation of irrigation requirements for Ogseo irrigation project is included. The results and applied materials are summarized as follows. 1. In calculating the Hargreaves formula, the mean temperature relative, humidity, length of day, and percentage of sunshine from three stations of Iri, Jeonju, and Gunsan were used. 2. Monthly evaporation values were calculated by using the formula. 3. Meteological data from the three stations records for the ten years (1963∼1972) were used. 4. The annual irrigation requirements is 1,186mm per hectare, but the case to consider effective rainfall amount takes the annual irrigation demand being 700mm per hectare.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.3
• /
• pp.251-264
• /
• 2017

Recently, Jeollabuk-do has been reported as a province where the $PM_{10}$concentration is one of the highest levels in South Korea. To explore the characteristics and origins of the $PM_{10}$in Jeollabuk-do, we present one of the first long-term datasets including a statistical analysis of $PM_{10}$concentrations obtained from six cities in the province from 2010 to 2015. During the entire periods, the mean hourly $PM_{10}$concentration was $49.3{\mu}g/m^3$, which correspond to the annual ambient air quality standards for $PM_{10}$in South Korea, and the annual $PM_{10}$concentration of each city showed a similarity in year-to-year variations. In the monthly variation of $PM_{10}$, the $PM_{10}$concentrations showed a maximum value in May that was one of the top levels among the provinces of Korea while the concentrations were dramatically decreased in August showing one of the lowest levels among the provinces in Korea. For the diurnal variation of $PM_{10}$, the $PM_{10}$concentration was enhanced during the rush hours together with gaseous species of $NO_2$, and CO. When the high concentrations of $PM_{10}$were observed (the highest 10% of the $PM_{10}$mass contribution), temperature and relative humidity were low. Using HYSPLIT backward trajectories and cluster analysis for the high $PM_{10}$concentrations, we found that the pollution plumes were transported mainly from China.