• The Korean Journal of Quaternary Research
• /
• v.4 no.1
• /
• pp.41-57
• /
• 1990

Gravel shapes of the terrace gravel sequences are compared with the present river gravels and beach gravels in the Pohang and its surrounding areas. Seventeen gravel textural parameters are divided into 5 groups based on R-mode factor analysis. Among them, three parameters (RDm, MPSm, SZstd) are selected for a test of discriminant possibility of palaeoenvironment of the terrace gravel deposits. Marine gravels are in the range of 0.49 to 0.75 in mean roundness, 0.46 to 0.78 in mean maximum projection sphericity and 0.39 to 1.85 in standard deviation of size, whereas river gravels are 0.28 to 0.51 in mean roundness, 0.66 to 0.72 in mean maximum projection sphericity and 1.04 to 1.81 in standard deviation of size. For practical access to the palaeoenvironment discrimination, a bivariant diagram between mean roundness and mean maximum projection sphericity is the most effective. The marine terrace gravels are plotted within the variation range of present beach gravels and show 0.49 to 0.71 in mean roundness and 0.59 to 0.66 in mean maximum projection sphericity. The gravels of river terrace vary within the range of gravels derived from present river bed and are characterized as 0.36 to 0.48 in mean roundness and 0.66 to 0.71 in mean maximum projection sphericity.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.47-61
• /
• 1991

Textural analysis of gravels of raised beach (old beach) in the Weaver Peninsula, King George Island, Antarctica has been carried out as a first part study among 20 other sites surveyed in the Weaver Peninsula and Barton Peninsula, King George Island. The raised beach described as WP-5 in this paper is 3.95 m higher than the present beach in elevation. And it is described as old beach. The beach shows typical subenvironment, that is, beach berm and beach face. Mean size, mean roundness and mean sphericity of gravels from beach berm are -4.10ø, 0.44 and 0.66 respectively. However, mean size, mean roundness and mean sphericity from beach face are -4.23ø, 0.41 and 0.67 respectively. In particular, it seems to be worthy to note the differences of textural parameters between Antarctic glacio-marine beach gravels and temperate and normal marine beach gravels. Under such conception the present study wishes to show only textural parameters, i.e., size, roundness, sphericity and shape obtained from the analysis of Antarctic glacio-marine beach gravels.

• Archives of Pharmacal Research
• /
• v.28 no.5
• /
• pp.619-625
• /
• 2005

Beads loaded with the water-soluble drug, phenylpropanolamine HCl (PPA), were prepared using an extruder and double arm counter-rotating roller modified from a traditional pill machine. The mean diameter of the cylindrical rod-like extrudate from the ram extruder was 3 mm; that of the uncoated bead after cutting and spheronization by the modified double arm counter-rotating roller was 3.26~3.28 mm. Although the surface of the beads was moderately rough and irregular, some exhibited hump-shaped protrusions, the sphericity was acceptable (roundness 1.15) and adequate for the subsequent coating process. An increase in mean diameter of the coated beads and improvements in friability and sphericity were observed in proportion to the amount of coating material applied (ethylcellulose or Eudragit？？ RS 100). It was also found that the release rate of PPA from the coated beads could be controlled by the amount and type of coating materials applied or with the incorporation of Eudragit ？？ RS 100 into the core matrix. Further modifications to the double arm counter-rotating roller, including adjustment of the rotation speed and distance between the rollers, would yield smaller uncoated beads with improved roundness and surface roughness. In conclusion , the present method could be potentially applied to prepare controlled release drug delivery beads or pellet dosage forms.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.261-264
• /
• 2003

Semi-solid processing is now becoming of great interest for the production of various parts by pressure die casting. Many advantages are associated with this forming process at the condition that the forming operation is performed under appropriate conditions. The thixoforming process, which needs a suspension of a globular, non-dendritic solid phase in the liquid phase, is characterized by three major steps. The first step is casting of billets with a microstructure suited for thixoforming. The second step is reheating of slugs cut from these billets. The third step is injection of the semi-solid slugs into a die. In this paper, the horizontal reheating machine to obtain the optimal conditions suitable for semiu-solid die casting process was used and applied to extrusion material. It is estimated the possibility of application on semi-solid die casting with extrusion material through various results.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.217-226
• /
• 1997

This study was to develop a machine vision system to detect and to discriminate 5 kinds of apple surface defectbruise, decay. fleck, worm hole and scar. To detect the defects from an image of apple, thresholding technique was applied to images on various frames (R, G, B, H, S and I) of the color machine vision and an image of near infrared (NIR). To discriminate the detected region of defect, various features of the 5 kind defect regions were extracted from the 4 kinds of images selected above. The features were size of area, roundness, axes length ratio, mean and valiance of pixel values, standard deviation of real part of amplitude spectrum in frequency domain obtained by Fourier transform of pixel data and mean and standard deviation of power spectrum obtained by the same transform of pixel data. Routines to discriminate the defects from the features of image were developed and tested to prove their validity. The test resulted that I-frame and NIR images were the most desirable. Accuracies of the two images to discriminate the defects were noted as 76% and 77%, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.33-40
• /
• 2021

In this study, the physico-chemical and biological characteristics of anaerobic granular sludge at different heights of a full-scale UASB reactor (UASBr) were investigated. Granular sludge was taken from 1 m, 2 m, and 3 m above the ground level in the UASBr. The morphological analysis showed that the upper part had bigger granules and the lower part had rounder granules. The ANOVA test confirmed that the mean size and the roundness of the granules had statistically significant difference along the height at 95% confidence level, and there was a significant negative linear relationship between the size and roundness (r=-0.40, p<0.05). A SMA test using acetic, propionic and butyric acids showed that granules from 2 m height had the highest specific methanogenic activity. The EPS contents were also unequal to each height, with 2 m showing the highest content. These findings could be helpful to understand the different characteristics of stratified anaerobic granules in full-scale UASBr and maintain the reactor performance.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.852-862
• /
• 1996

This study was carried out to develop tools to detect defects of apple using machine vision. For the purpose, 6 kinds of frame for color images, R, G, B, h, S, and I frame, and a frame for near infra-red images (NIR frame) were tested first to select one which is useful to segment defect areas from apple images. After then, several methods to classify kind of defect for the segmented defect areas were developed and tested. Five kinds of apple defect -bruise , decay ,fleck worm hole and scar were investigated . The results are as follows: NIR frame was selected as the best one among the 7 kinds of image frame, and R, G and I frames showed favourable result to segment areas of apple defect. Various features of the segmented defect areas were measured to classify the defect areas. Eight kids of feature of the areas-size, roundness, axes length ratio, mean and variance of pixel values, variance of real part of spectrum, mean and variance of power spectrum resulted from spacial ourier transform were observed for the segmented defect areas in the selected 4 frames. then procedures to classify defects using the features were developed for the 4 frames and tested with 75-113 defects on apples. The test resulted that NIR and I frames showed high accuracies to classify the kind of defect as 77% and 76% , respectively.

• Transactions of Materials Processing
• /
• v.17 no.1
• /
• pp.9-12
• /
• 2008

Recently, industries and academic institutes have been interested in the rheology forming technology for light weight materials. However, this rheocasting process has advantages such as the high initial investment cost and the lower mechanical properties than thixocasting. In this study, the continuous fabrication of rheological material with a spiral stirring equipment(mechanical stirring system) was newly devised to overcome the disadvantages of rheocasting process. The experimental parameters were stirring time($0{\sim}1200sec$), stirring velocity ($0{\sim}100rpm$) and stirring temperature($650{\sim}680^{\circ}C$). The optimal conditions for fabricated rheological material of A6061 alloy were stirring time at 300sec, stirring velocity at 60rpm and stirring temperature at $650^{\circ}C$. At these results, the equivalent diameter was $45{\sim}65{\mu}m$, mean roundness was $1.4{\sim}1.6$ and Vickers hardness was 60Hv.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.115-125
• /
• 2022

The high-Reynolds number flow around a rectangular cylinder, having streamwise to crossflow length ratio equal to 5 is analyzed in the present paper. The flow is characterized by shear-layer separation from the upstream edges. Vortical structures of different size form from the roll-up of these shear layers, move downstream and interact with the classical vortex shedding further downstream in the wake. The corresponding mean flow is characterized by a recirculation region along the lateral surface of the cylinder, ending by mean flow reattachment close to the trailing edge. The mean flow features on the cylinder side have been shown to be highly sensitive to set-up parameters both in numerical simulations and in experiments. The results of 21 Large Eddy Simulations (LES) are analyzed herein to highlight the impact of the lateral mean recirculation characteristics on the near-wake flow features and on some bulk quantities. The considered simulations have been carried out at Reynolds number Re=DU_∞/ν=40 000, being D the crossflow dimension, U_∞ the freestream velocity and ν the kinematic viscosity of air; the flow is set to have zero angle of attack. Some simulations are carried out with sharp edges (Mariotti et al. 2017), others with different values of the rounding of the upstream edges (Rocchio et al. 2020) and an additional LES is carried out to match the value of the roundness of the upstream edges in the experiments in Pasqualetto et al. (2022). The dimensions of the mean recirculation zone vary considerably in these simulations, allowing us to single out meaningful trends. The streamwise length of the lateral mean recirculation and the streamwise distance from the upstream edge of its center are the parameters controlling the considered quantities. The wake width increases linearly with these parameters, while the vortex-shedding non-dimensional frequency shows a linear decrease. The drag coefficient also linearly decreases with increasing the recirculation length and this is due to a reduction of the suctions on the base. However, the overall variation of C_D is small. Finally, a significant, and once again linear, increase of the fluctuations of the lift coefficient is found for increasing the mean recirculation streamwise length.