• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.708-715
• /
• 1998

The shelter effect of a porous wind fence on a triangular prism was experimentally investigated in a circulating water channel. A porous fence of porosity .epsilon.=38.5% was installed in front of the prism model. The fence and prism model were embedded in a turbulent boundary layer. The instantaneous velocity fields around the fence and prism model were measured by using the instantaneous velocity fields around the fence and prism model were measured by using the 2-frame PTV(Particle Tracking Velocimetry) system. By installing the fence in front of the prism, the recirculation flow region decreases compared with that of no fence case. The porous fence also decreases the mean velocity, turbulent intensity and turbulent kinetic energy around the prism. Especially, at the top of the prism, the turbulent kinetic energy is about half of that without the fence.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.35-40
• /
• 1992

Porous glass in the ZrO2-SiO2 system containing up to 30 mol% zirconia were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed TEOS by the sol-gel method. Pore characteristics, physical properties and alkali resistance were investigated. The gels converted into the porous glass by heating at $700^{\circ}C$, it was found that the glass like skeleton was already made up in lower temperature regions. The specific surface area of the porous glass was 227 $m^2$/g, average mean pore size was about 19$\AA$ and porosity was 19.2%, pore characteristics and physical properties depended on heating temperature. Alkali resistance of the porous glass increased as the zirconia content increased, because of the appearance of Zr-enriched layer at glass surface.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.710-718
• /
• 1995

The new forming method, Pressureless Powder Packing Forming Method was applied to the manufacturing of reaction sintered SiC. After the experiments of vibratory powder packing and binder infiltration, the abrasive SiC powder of which mean size is 45${\mu}{\textrm}{m}$ was selected to this forming method. Uniform green bodies with porosity of 45% and narrow pore size distribution could be formed by this new forming method. Also, complex or varied cross-sectional shapes could be easily manufactured through the silicone rubber mould used in this forming method. Maximum 15 wt% amorphous carbon was penetrated into green body by multi impregnation-carbonization cycles. And reaction-bonded SiC was manufactured by infiltration of SiC-carbon shaped bodies with liquid silicon.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1394-1402
• /
• 1996

The Silica gel with the density of 0.2g/cm3 and porosity of 90% was synthesized. The silica wet gel was dried and heat-treated under the ambient pressure after modification of the wet gel surface by TMCS. Specific surface area total pore volume and mean pore radius of dried gel were all increased with increasing heat treatment temperature and confirmed about 1400m2/g, 4.5cc/g and 8 nm respectively after heat treatment above 25$0^{\circ}C$. But the pore size distribution of dried gel was in the range of 1-100nm and was almost indepen-dent of temperature. As the result of external shape pore characteristics and microstructure of gel using SEM similar properties were observed between the silica gel synthesized in this study and the silica aerogel through the super critical drying.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.76-77
• /
• 1998

In this paper, the authors have implemented a blood flow simulator and a blood flowmeter probe using self-mixing effect of the laser diode. The purpose of the blood simulator is to simulate microvascular blood flow in tissue. It consists of melinex film (thickness = $125{\mu}m$) which has similar optical characteristics to epidermis and porous polyethylene filter (Vyon, porosity 35%, mean pore size $50{\mu}m$, thickness=1 mm) which has similar optical characteristics to dermis. The blood flowmeter probe consists of laser diode(5 mW, 780 nm wavelength), CD lens(focal lenght 12 mm), current-to-voltage converter, highpass filter, and preamplifier. It doesn't need optical fiber, therefore, implementation of the probe is simpler than conventional probe using optical fiber.

• 센서학회지
• /
• 제8권2호
• /
• pp.133-138
• /
• 1999

In this pager, the authors have implemented a blood flow simulator and a LDF(laser Doppler flowmeter) probe using self-mixing effect of the laser diode. The purpose of the blood flow simulator is to simulate microvascular blood flow in tissue. It consists of melinex film (thickness = $123\;{\mu}m$) which has similar optical characteristics to epidermis and porous polyethylene filter (Vyon, porosity 35%, mean pore size $50\;{\mu}m$, thickness=1 mm) which has similar optical characteristics to dermis. The blood flowmeter probe consists of laser diode(5 mW, 780 nm wavelength), CD lens(focal length 12 mm). current-to-voltage converter, highpass filter, and premplifier. It doesn't need optical fiber, therefore, implementation of the probe is simpler than conventional probe using optical fiber.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.500-506
• /
• 2007

The effects of anisotropic surface energy on the microstructure development of porous materials have been studied through Monte Carlo simulation using a three dimensional lattice. The changes in porosity ($f_v$), mean grain diameter ($D_s$), fraction of connected pores ($f_{v,c}$) and contiguity of the solid phase (C) were examined in cases with three different ${\gamma}_{SV}$ relations and initial grain diameters ($D_{s,o}$). It has been found that larger ${\gamma}_{SV}$ enhances sintering of particles and increases C and does not change $D_s$. And Introducing anisotropic ${\gamma}_{SV}$ brought an increase in $f_v$ and $f_{v,c}$ and an decrease in $D_s$ and C, and this tendency become more marked for fine $D_{s,o}$.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.5-15
• /
• 2015

본 연구에서는 수리-역학적 유한요소 해석기법을 바탕으로 강우침투에 의한 비탈면 안정성과 커플링 효과를 분석하였다. 이를 위해 수리학적 특성과 역학적 특성을 동시에 고려할 수 있는 해석기법을 개발 하였으며, 현장모관흡수력 측정 결과를 활용하여 해석기법을 검증하였다. 이를 바탕으로 균질한 지층과 비탈면을 모델링 하여 강우발생에 따른 모관흡수력 변화, 평균유효응력, 간극률 변화, 지반 변위, 안전율의 결과를 단계별 해석결과와 비교 분석하였다. 그 결과, 간극률의 변화를 고려할 수 있는 커플링 해석의 변위는 단계별 해석에 비해 크게 나타났으며, 모관흡수력은 천천히 감소하는 것으로 나타났다. 커플링 해석을 통해 동시에 계산된 변형과 모관흡수력 감소는 비탈면의 불안정성에 큰 영향을 미치며, 점진적 파괴거동을 확인할 수 있다. 커플링 해석을 통한 비탈면 안정해석 시, 단기간 발생한 강우에 대해 낮은 안전율을 보여 커플링 효과가 큰 것으로 나타났으며, 집중호우에 의한 비탈면 설계 시 커플링 해석이 필요함을 알 수 있었다.

• Composites Research
• /
• 제29권5호
• /
• pp.256-261
• /
• 2016

본 연구에서는 습식공정을 이용한 Pitch계 활성탄소섬유와 바인더 섬유를 이용하여 필터 페이퍼를 제조하였다. 필터 페이퍼 내 바인더 섬유의 함량이 기공특성에 미치는 영향을 알아보기 위해 77 K에서 질소 흡착 등 온선과 주사 전자 현미경을 통해 흡착특성을 비교 분석하였다. Pitch계 활성탄소섬유와 바인더 섬유와의 최적 비율은 70:30 비율로 가장 균일한 기공 및 결합력이 좋은 페이퍼의 모습을 보였으며, 바인더 섬유의 함량이 적을수록 높은 비표면적 값을 확인하였다. Pitch계 활성탄소섬유와 바인더 섬유의 종류와는 상관없이 70:30 비율에서 최적의 페이퍼가 제조되었으며, $650.4m^2/g$의 비표면적 값과 86.9%의 유해가스 제거율을 확인하였다. 또한 필터 페이퍼의 평균 기공 크기 분포는 바인더 섬유의 영향을 받지 않는 것으로 관찰되었다.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.108-113
• /
• 2017

The use of aluminum-based coagulants in water pretreatment is being carefully considered because aluminum exposure is a risk factor for the onset of Alzheimer's disease. Lightly burned-dolomite kiln dust (LB-DKD) was evaluated as an alternative coagulant because it contains high levels of the healthful minerals calcium and magnesium. An organic pore forming agent (OPFA) was incorporated to prepare porous granules after OPFA removal through a thermal decomposition process. A spray drying method was used to produce uniform and reproducible spherical granules with low density, since fine dolomite particles have irregular agglomeration behavior in the hydration reaction. The use of fine dolomite powder and different porosity granules led to a visible color change in raw algae (RA) containing water, from dark green to transparent colorlessness. Also, dolomite powders and granules exhibited a mean removal efficiency of 48.3% in total nitrogen (T-N), a gradual increase in the removal efficiency of total phosphorus (T-P) as granule porosity increased. We demonstrate that porous dolomite granules can improve the settling time and water quality in summer seasons for the emergent treatment of excessive algal blooms in eutrophic water.