• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.349-353
• /
• 1996

Background: Although the paramedian approach for epidural blockade is useful in some clinical situation, the parameters which are correlated with the distance from skin to the epidural space has not been established. Methods: We studied in 143 patients having elective continuous epidural blocks for relief of postoperative pain. All blocks were performed using paramedian approach with Tuohy needle in the lumbar (group 1, n=100) and thoracic (group 2, n=45) area. We measured the distance from skin to the epidural space, body weight, height, and the angle between the shaft of the needle and the skin. Data were analyzed by linear regression. The relationships between parameters identified by the F-test with a P value of less than 0.05 were considered statistically significant. Results: The mean distance from skin to the lumbar epidural space was $4.4{\pm}0.7$ cm. significant correlation between the body weight and the depth of lumbar epidural space ($\gamma$ value : 0.492) was noted with regression equation of depth(cm)=2.293+0.034${\times}$body weight (kg). Also the significant correlation between the ponderal index (PI) and the depth of lumbar epidural space ($\gamma$ value : 0.539) was noted with regression equation of depth(cm)=1.703+0.07${\times}$PI, The mean distance from skin to the thoracic epidural space was $5.2{\pm}0.7cm$ which did not correlated with other anatomic measurements. Conclusion: We found that PI and body weight are the suitable predictors of the depth of the lumbar epidural space, but not the thoracic epidural space.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2131-2137
• /
• 2008

In this paper, COP (center of pressure) during quiet standing and squat-and-stand movement was analyzed to compare the postural control of young and elderly subjects with special interest in the elderly females who were reported to have higher fall rate than the elderly males. Subjects include the young subjects (10 males: $21.8{\pm}2.6yrs$, 10 females: $20.4{\pm}0.3yrs$) and the elderly subjects (8 males: $75.5{\pm}4yrs$, 8 females: $72.3{\pm}3.5yrs$). Analysis parameters were the mean of the distance between the instantaneous COP and the average COP (COP distance) and the mean of the COP movement velocity (COP velocity) in both AP (anterio-posterior) and ML (media-lateral) directions. During quiet standing, the COP distance in ML direction of elderly females was significantly greater than that of elderly males and the COP velocity of elderly females in both ML and AP direction were significantly greater than those of all the other groups. During squat and stand movement, the COP distance of elderly females was not significantly different with that of the elderly males. However, the COP velocity of elderly females was significantly greater than that of all the other groups. The large lateral weight shift (COP distance) of elderly females during quiet standing may explain their greater fall rate. However, this does not apply to squat-and stand movement. In contrast, COP velocity results show that the elderly females' COP is rapidly trembling compared to that of elderly males during both quiet standing and squat and-stand movement. This results suggest that rapid trembling or postural sway may reflect the reduced postural control ability and the risk of falling.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.10-20
• /
• 1992

The new course distances of a ship are considered to be the indices to indicate directly her abilities of course altercation. Generally, they have long been calculated by using the maneuvering indices obtained from her Z test. However, at sea actually the maneuvering indices can not sometimes be obtained according to ship's condition or circumstances and the new course distances can not be calculated. To find out other method to calculate the new course distances, in this paper the author analyzed them from a viewpoint of ship motion, and worked out a numerical formula to calculate them easily, using the data of ship's heading test. In order to check whether the presented method is applicable to actual ships or not, the experiment by them were also performed. The results obtained are summarized as follow: 1. The mean difference of the distance between two new course distances by the heading test and the maneuvering indices of the experimental ship was about 0.98% values of the ones by the maneuvering indices, when her heading were 10。, 20。 and 30。, using the rudder angle of 15。. These new course distances were therefore found to be almost same in values of the distance. 2. The mean difference of the distance between two new course distances by the heading test and the observation of experimental ship was about 1.16% values of the ones by the observation, when her headings were 10。, 20。 and 30。, using the rudder angle of 15。. These new course distances were therefore found to be almost same in values of the distance. 3. It is confirmed that the new course distances can be calculated easily by using the method of ship's simple heading test, without the observation or using the maneuvering indices. 4. It is considered to be helpful for the safety of shiphanding to draw curves of new course distances by ship's heading test and utilize them at sea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.494-500
• /
• 2020

This paper proposes a new distance estimation technique for indoor localization in ultra wideband (UWB) systems. The proposed technique is based on recurrent neural network (RNN), one of the deep learning methods. The RNN is known to be useful to deal with time series data, and since UWB signals can be seen as a time series data, RNN is employed in this paper. Specifically, the transmitted UWB signal passes through IEEE802.15.4a indoor channel model, and from the received signal, the RNN regressor is trained to estimate the distance from the transmitter to the receiver. To verify the performance of the trained RNN regressor, new received UWB signals are used and the conventional threshold based technique is also compared. For the performance measure, root mean square error (RMSE) is assessed. According to the computer simulation results, the proposed distance estimator is always much better than the conventional technique in all signal-to-noise ratios and distances between the transmitter and the receiver.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1000-1009
• /
• 2006

We propose an adaptive linear interpolation locating sub-pixels. We utilize a pixel-based parameter in the conventional linear interpolation. To optimally obtain the parameter, we propose a generic interpolation structure including a low pass filter and minimum mean square error. We also propose a simple version of the generic interpolation method, which obtain a closed-form solution. Simulation results show that the proposed method is superior to the state-of-the-art methods such as warped distance linear interpolation and shifted linear interpolation, as well as the conventional method such as the linear interpolation and the cubic convolution interpolation in terms of the subjective and objective image quality.

• Korean Journal of Environment and Ecology
• /
• v.12 no.4
• /
• pp.361-372
• /
• 1999

Thirty-two plots have been set up and surveyed to investigate the plant community structure and distribution density of Pinus thunbergii-P. densiflora forest in Kojedo District, Hallyo-Haesang National Park. By DCA ordination technique P. thunbergii-P. densiflora forest was classified into P. thunbergii community, P. thunbergii-P. densiflora community, and P. densiflora community. The trend of plant community succession was invalid. The results of simple regression analysis between mean DBH(cm), mean distribution distance(m), and number of individual of P. thunbergii and P. densiflora were as follows: Distribution distance(m) = 0.094$\times$DBH(cm)-0.1248, Number of individual=1,820.1$\times$(cm)$DBH^{-1.6734}$ , Distribution distance(m)=6.6805$\times$Number of $individual^{-0.5425}$ .

• PNF and Movement
• /
• v.8 no.1
• /
• pp.67-77
• /
• 2010

Purpose : The purpose of this study was to investigate the usefulness of clinical balance tests through the correlation of balance evaluation using by forceplate in elderly. Methods : Thirty nine healthy elderly subjects (14 males, 25 females) participated in the study. The subjects were evaluated with clinical balance tests [(Berg balance scale (BBS), Functional reach test (FRT), Tinetti's performance oriented mobility assessment (POMA), and one leg standing (OLS)]. Static balance evaluation was assessed by using forceplate. Center of pressure (COP) parameters were obtained using it as total path distance, total sway area, X mean frequency and Y mean frequency for 20 seconds in the following conditions: (1) comfortable standing with eyes opened and closed, (2) uncomfortable standing with eyes opened and closed. After static balance evaluation tested, dynamic balance evaluation was assessed. COP parameters were error distance and area during sine curve trace. COP parameters were movement time, error distance, and maintained time in the circle during COP movement task. Results : Clinical balance tests showed statistically significant correlation between static and dynamic balance evaluations. Among the clinical balance tests, the BBS, POMA, and OLS showed significant correlation with to assess the balance ability of elderly in clinical setting both evaluations. Conclusion : Clinical balance tests can be recommended in clinical setting because of low costs and simplicity.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.193-204
• /
• 1998

The purpose of this study was to perform the radiographic measurements and temporomandibular joint evaluation in mandibular asymmetry. For this study, thirty-two patients who have mandibular asymmetry were selected and submentovertex, panoramic and lateral corrected tomographic radiographs were taken. Horizontal and vertical analysis using various landmarks on these radiographs were performed. Also radiographic and clinical evaluation of temporomandibular joint were obtained. The results were as follows ; 1. On the submentovertex radiograph, the mean distance of Pogonion to midline was 5.0±3.8mm. 2. The mean distance of Pogonion to Gonion was 100.6±9.2mm in deviated side and 104.3±9.1mm in contra-lateral side, and there was a significant difference between the deviated and the contra-lateral side (p<0.001). 3. The distance difference of Pogonion to Gonion between the deviated and the contra-lateral side was significantly related to the degree of asymmetry (p<0.001). 4. On panoramic radiograph, the condylar height of the contra-lateral side was significantly longer than the one of the deviated side(p<0.001). 5. On lateral corrected tomogram, bony changes of temporomandibular joint were observed in 11 condyles of the deviated side and 9 condyles of the contra-lateral side. Erosion and osteophyte were the most common changes in both the deviated and the contra-lateral sides.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.3
• /
• pp.228-240
• /
• 2019

Purpose: The aim of this study is to evaluate the T2 value of the articular cartilage of the glenohumeral joint in rotator cuff disease displayed on 3.0T MRI and to apply it in clinical practice. Materials and Methods: This study involved sixty-two patients who underwent shoulder MRI containing T2 mapping. The mean T2 value was measured by placing a free hand ROI over the glenoid or humeral cartilage from the bone-cartilage interface to the articular surface on three consecutive, oblique coronal images. The drawn ROI was subsequently divided into superior and inferior segments. The assessed mean T2 values of the articular cartilage of the glenohumeral joint were compared and evaluated based on the degree of rotator cuff tear, the degree of fatty atrophy of the rotator cuff, and the acromiohumeral distance. Results: ICC values between two readers indicated moderate or good reproducibility. The mean T2 value for the articular cartilage of the glenoid and humeral head cartilage failed to show any significant difference based on the degree of rotator cuff tear. However, the mean T2 values of articular cartilage, based on fatty atrophy, tended to be higher in fatty atrophy 3 or fatty atrophy 4 groups while some subregions displayed significantly higher mean T2 values. There was no correlation between the acromiohumeral distance and the mean T2 values of the articular cartilage of the glenoid and humeral head. Conclusion: T2 mapping of the glenohumeral joint failed to show any significant difference in quantitative analysis of the degenerative change of the articular cartilage based on the degree of rotator cuff tear. However, it also offers quantitative information on the degenerative change of cartilage of the glenohumeral joint in patients with rotator cuff tear and severe fatty atrophy of the rotator cuff.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.161-168
• /
• 2015

In this paper, we present an inertial sensor-based gait distance measurement system using accelerometer, gyroscope, and magnetometer. To minimize offset and gain error of inertial sensors, we performed the calibration using the self-made calibration jig with 9 degrees of freedom. For measuring accurate gait distance, we used gradient descent algorithm to remove gravity error and used analysis of gait pattern to remove drift error. Finally, we measured a gait distance by double-integration of the error-removed acceleration data. To evaluate the performance of our system, we walked 10m in a straight line indoors to observe the improvement of removing error which compared un-calibrated to calibrated data. Also, the gait distance measured by the system was compared to the measurement of the Vicon motion capture system. The evaluation resulted in the improvement of $31.4{\pm}14.38%$(mean${\pm}$S.D.), $78.64{\pm}10.84%$ and $69.71{\pm}26.25%$ for x, y and z axis, respectively when walked in a straight line, and a root mean square error of 0.10m, 0.16m, and 0.12m for x, y and z axis, respectively when compared to the Vicon motion capture system.