• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1687-1692
• /
• 2012

Background: Few studies have examined theoretically informed constructs related to hepatitis B (HBV) testing, and comparisons across studies are challenging due to lack of uniformity in constructs assessed. The present analysis examined relationships among Health Behavior Framework factors across four Asian American groups to advance the development of theory-based interventions for HBV testing in at-risk populations. Methods: Data were collected from 2007-2010 as part of baseline surveys during four intervention trials promoting HBV testing among Vietnamese-, Hmong-, Korean- and Cambodian-Americans (n = 1,735). Health Behavior Framework constructs assessed included: awareness of HBV, knowledge of transmission routes, perceived susceptibility, perceived severity, doctor recommendation, stigma of HBV infection, and perceived efficacy of testing. Within each group we assessed associations between our intermediate outcome of knowledge of HBV transmission and other constructs, to assess the concurrent validity of our model and instruments. Results: While the absolute levels for Health Behavior Framework factors varied across groups, relationships between knowledge and other factors were generally consistent. This suggests similarities rather than differences with respect to posited drivers of HBV-related behavior. Discussion: Our findings indicate that Health Behavior Framework constructs are applicable to diverse ethnic groups and provide preliminary evidence for the construct validity of the Health Behavior Framework.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.23-32
• /
• 2011

In this work, the finite element method was used to investigate the shifts of resonance frequencies and quality factor of whispering-gallery-mode (WGM) for an opto-fluidic ring resonator (OFRR) biosensor. To describe the near-field radiation transfer, the time-domain Maxwell's equations were employed and solved by using the in-plane TE wave application mode of the COMSOL Multiphysics with RF module. The OFRR biosensor model under current study includes a glass capillary with a diameter of 100 mm and wall thickness of 3.0 mm. The resonance energy spectrum curves in the wavelength range from 1545 nm to 1560 nm were examined under different biosensing conditions. We mainly studied the sensitivity of resonance shifts affected by changes in the effective thickness of the sensor resonator ring with a 3.0 mm thick wall, as well as changes in the refractive index (RI) of the medium inside ring resonators with both 2.5 mm and 3.0 mm thick walls. In the bulk RI detection, a sensitivity of 23.1 nm/refractive index units (RIU) is achieved for a 2.5 mm thick ring. In small molecule detection, a sensitivity of 26.4 pm/nm is achieved with a maximum Q-factor of $6.3{\times}10^3$. These results compare favorably with those obtained by other researchers.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.324-328
• /
• 1995

The changes in the rheological properties of soybean curd upon the processing conditions were measured by the failure test, and analyzed by the stress-relaxation data. Soybean curd coagulated with $CaCl_2$ showed a higher failure stress value than other coagulants such as $MgCl_2,\;CaSO_4\;and\;Glucono-{\delta}-lactone$ (GDL), whereas addition of 0.3% $CaCl_2$ produced higher failure stress value than other concentrations $0.2{\sim}0.6%)$. Also, maximum failure stress of soybean curd was shown at the higher heating temperatures$(95^{\circ}C)$ and greater molding pressures, respectively. Initial and equilibrium stress at the stress relaxation curves showed the same tendency as those of failure test, and magnitude of elastic elements$(E_0,\;E_e)$ and viscous element$({\eta})$ were numerically expressed through simple Maxwell model analysis.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.148-156
• /
• 1988

A method for the measurement of viscoelastic properties of heat denatured gluten network was developed in order to evaluate the noodle making quality of wheat flour. The stress relaxation of elongated heat denatured gluten network could be expressed by 6-element generallized Maxwell model. The tensile force of heat denatured gluten network increased by the heating time. The elastcity and viscosity of the first exponential term which covers 70-74% of the total relaxation increased as cooking time was extended up to 1q min. The addition of gluten network strengthening agent, potassium bromate, at 1000ppm level reduced the elasticity and viscosity, while weakening agent, L-cystein, increased them. The relaxation time decreased after 11 min of cooking in both cases. The elasticity and viscosity of heat denatured gluten were affected differently by the concentration of added urea.

• Journal of The Korean Astronomical Society
• /
• v.50 no.1
• /
• pp.7-20
• /
• 2017

We carry out the study of $850{\mu}m$ sources in a part of the XMM-LSS field. The $850{\mu}m$ imaging data were obtained by the SCUBA-2 on the James Clerk Maxwell Telescope (JCMT) for three days in July 2015 with an integration time of 6.1 hours, covering a circular area with a radius of 15'. We choose the central area up to a radius of 9'.15 for the study, where the noise distribution is relatively uniform. The root mean square (rms) noise at the center is 2.7 mJy. We identify 17 sources with S/N > 3.5. Differential number count is estimated in flux range between 3.5 and 9.0 mJy after applying various corrections derived by imaging simulations, which is consistent with previous studies. For detailed study on the individual sources, we select three sources with more reliable measurements (S/N > 4.5), and construct their spectral energy distributions (SEDs) from optical to far-infrared band. Redshift distribution of the sources ranges from 0.36 to 3.28, and their physical parameters are extracted using MAGPHYS model, which yield infrared luminosity $L_{IR}=10^{11.3}-10^{13.4}L_{\odot}$, star formation rate $SFR=10^{1.3}-10^{3.2}M_{\odot}yr^{-1}$ and dust temperature $T_D=30-53K$. We investigate the correlation between $L_{IR}$ and $T_D$, which appears to be consistent with previous studies.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.72-80
• /
• 2009

When the magnet wheel rotates over a conducting plate, it generates the traction torque as well as the repulsive force on the conducting plate. Partially-cut traction torque results in the linear force into the tangential direction. To cut the traction torque, the concept of magnetic shield is introduced. The direction change of the linear force is realized varying the shielded area of magnetic field. That is, the tangential direction of non-shielded open area becomes the direction of the linear thrust force. Specially a shape of permanent magnets composing the magnet wheel leads to various pattern of magnetic forces. So, to enlarge the resulting force density and compensate its servo property a few simulations are performed under various conditions such as repeated pattern, pole number, radial width of permanent magnets, including shape of open area. The theoretical model of the magnet wheel is derived using air-gap field analysis of linear induction motor, compared with test result and the sensitivity analysis for its parameter change is performed using common tool; MAXWELL. Using two-axial wheel set-up, the tracking motion is tested for a copper plate with its normal motion constrained and its result is given. In conclusion, it is estimated that the magnet wheel using partial shield can be applied to a noncontact conveyance of the conducting plate.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2000

Scattering coefficients of randomly rough lossy dielectric surfaces were computed by using the FDTD(Finite-Difference Time-Domain) method and the Monte Carlo method in this paper. The FDTD method was applied to compute electromagnetic wave scattering characteristics at any incident angles, any linear polarizations by dividing the computation region into the total-field region and the scattered-field region. The radar cross sections(RCS) of conducting cylinders have been computed and compared with theoretical results, measurement data and the results from the method of moment(MoM) to verify the FDTD algorithm. Then, to apply the algorithm to compute scattering coefficients of distributed targets, a two-dimensionally rough surface was generated numerically for given roughness characteristics. The far-zone scattered fields of 50 statistically independent dielectric rough surfaces were computed and the scattering coefficient of the surface was calculated from the scattered fields by using the Monte Carlo method. It was found that these scattering coefficients agree well with the SPM(Small Pertubation Method) model in its validity region.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.116-121
• /
• 2011

This study was aimed to analyze the changes in rheological properties of sausages added tenderizer made with over-matured used-up fruits such as kiwifruit, grape, and pear. The tenderizers were manufactured by various concentration of fruit extract and added to the sausage at different heating temperatures. Failure stress and stress relaxation of beef sausage mixed with different tenderizers were measured with Rheometer, and analyzed with 3-element Maxwell model. As a result of the rheological measurements, over-matured kiwifruit extract showed the best tenderness effect among other fruit extracts, and the more kiwi contents were added, the beef texture turned to softer. The instantaneous stress and elastic component of beef mixed with various tenderizers were decreased at higher concentrations and lower heating temperatures. This study was well expressed the numerical magnitude of viscoelastic components of beef sausages to determine the tenderizer effect.

• Advances in nano research
• /
• v.12 no.1
• /
• pp.81-99
• /
• 2022

The aim of current work is to evaluate thermo-electrical characteristics of graphene nanoplatelets Reinforced Composite (GNPRC) coupled with magneto-electro-elastic (MEE) face sheet. In this regard, a cylindrical smart nanocomposite made of GNPRC with an external MEE layer is considered. The bonding between the layers are assumed to be perfect. Because of the layer nature of the structure, the material characteristics of the whole structure is regarded as graded. Both mechanical and thermal boundary conditions are applied to this structure. The main objective of this work is to determine critical temperature and critical voltage as a function of thermal condition, support type, GNP weight fraction, and MEE thickness. The governing equation of the multilayer nanocomposites cylindrical shell is derived. The generalized differential quadrature method (GDQM) is employed to numerically solve the differential equations. This method is integrated with Deep Learning Network (DNN) with ADADELTA optimizer to determine the critical conditions of the current sandwich structure. This the first time that effects of several conditions including surrounding temperature, MEE layer thickness, and pattern of the layers of the GNPRC is investigated on two main parameters critical temperature and critical voltage of the nanostructure. Furthermore, Maxwell equation is derived for modeling of the MEE. The outcome reveals that MEE layer, temperature change, GNP weight function, and GNP distribution patterns GNP weight function have significant influence on the critical temperature and voltage of cylindrical shell made from GNP nanocomposites core with MEE face sheet on outer of the shell.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.33-41
• /
• 2022

Infrastructure procurement has been a major engagement route between China and Africa. This contributes immensely to the gradual infrastructure development seen on the continent. However, maturing discourse purports that these infrastructure collaborations lack intentionality in the continuous development of strategic guidelines and policies for effective implementation despite their uniqueness and criticality. This study proposes that an efficient approach to policy recommendations is through the political and economic analysis (PEA) of these partnerships using public-private partnership (PPP) optics. Unquestionably, these partnerships are representative of the concept of diplomatic transnational public-private partnership (DT-PPP) where infrastructure is procured through the collaboration of public (African governments) and private sector (Chinese state-owned corporations) who provide the managerial, financial, and technical resources for the project implementation. Given the quest for sustainable win-win, this study identifies strategies towards the realization of win-win in the implementation (i.e enablers of win-win) such that fairness and co-benefit, as well as interests, will be achieved. Thus, based on the PEA framework, case scenarios from Ghana and Nigeria using expert interviews identify the criticalities and best practices for the realization of these enablers at the development phase. Findings indicate more effort is required of the public sector (African host countries) in terms of people, structure/institutions, and the implementation processes. Recommendations include improvement of environmental management structures, contract administration procedures, external stakeholders/local community engagement mechanisms, knowledge and technology transfer procedures, and sector-based project operation and maintenance culture and systems. Additionally, actors must have emotional intelligence, good problem-solving abilities, and overall ensure cordial relationships for continued bilateral cooperation.