• 수산해양교육연구
• /
• 제25권1호
• /
• pp.1-11
• /
• 2013

The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.105-110
• /
• 2009

Shipwaves am have harmful effects on ships working on the sea, in a harbour or navigational channel and caused beach erosion, seawall destruction. This study aims to investigate describe the characteristics of the wave pattern generated by an individual model ship tested at different velocities and hull forms for a given water depth and to investigate the variations at a given distance from the sailing line under the same conditions. As a result, the angles a's by model ship tests are smaller than those by real ship ones. Wave heights decreases with an increasing the mid-ship cross sectional area $A_s$. The maximum wave height and period increase rapidly in the subcritical speed, and beyond the critical speed the height and period decrease with increasing depth Froude number. And the period keeps constant with the distance from the sailing line.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.479-483
• /
• 2004

A new calculation method of expected overtopping probability of rubble mound breakwater considering real tide occurrence has been proposed. A calculation method of expected overtopping probability of rubble mound breakwater was proposed by Kweon and Suh (2003). In their calculation, the fluctuation of tidal elevation was expressed by the sinusoidal change that yields the uniform distribution of occurrence frequency. However, the realistic distribution of tidal elevation should influence on the overtopping chance. In this study, the occurrence frequency of tidal elevation obtained from the real sea is included. The tidal elevation used in this study is collected from the east coastal part of Korean peninsular. Analyzing the annual data of the tidal fluctuation measured hourly during 355 days, the distribution of occurrence frequency is formulated utilizing by the normal distribution with one peak. Among the calculation procedures of annual maximum wave height, wave height-period joint distribution, wave run-up height and occurrence frequency of tide, only the annual maximum wave height is again chosen randomly from normal distribution to consider the uncertainty. The others are treated by utilizing the distribution function or relationship itself, It is found that the inclusion of the variability of tidal elevation has great influence on the computation of the expected overtopping probability of rubble mound breakwater. The bigger standard deviation of occurrence frequency is, the lower the overtopping probability of rubble mound breakwater is.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.25-31
• /
• 2003

Numerical experiments have been conducted using the nonlinear combined refraction-diffraction model, in order to analyze the generation characteristics of stem wave, which is formed by the interaction between vertical structure and the oblique incident waves. The results of stem wave are discussed through the stem wave height distribution along/normal vertical structure, under the wide range of incident wave conditions-wave heights, periods, depths, and angles. Under the same wave height and period, the larger the incident wave angle, the higher the stem wave heights. According to the results of wave height distribution, in front of vertical structure, the maximum of stern wave heights occurs in the location bordering the vertical wall. Furthermore, the most significant result is that stem waves occur under the incident angles between $0^{\circ}\;and\;30^{\circ}$, and the stem wave height ratio has the maximum value, which is approximately 1.85 times the incident wave height when the incident wave angle becomes $23^{\circ}$.

• 한국수자원학회논문집
• /
• 제32권6호
• /
• pp.649-655
• /
• 1999

본 연구에서는 정현파와 크노이드파를 입사파로 이용하여 주기파의 최대 처오름높이를 수치해석하였다. 크노이드파의 최대 처오름높이는 파장이 매우 짧아지면 정현파의 처오름높이에 접근하며, 파장이 길어지면 고립파의 처오름높이와 유사한 성질을 갖는다. 동일한 파고로 입사할 경우, 크노이드파의 최대 처오름높이는 정현파의 처오름 높이보다는 항상 큰 반면에, 고립파의 처오름높이보다는 항상 작다는 것을 보였다.

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.2941-2951
• /
• 2018

본 연구는 해양기상관측자료인 평균 풍속, 평균 기압, 평균 상대습도, 평균 기온, 평균 수온, 평균 최대파고, 평균 유의파고, 최고 유의파고, 최고 최대파고, 평균 파주기, 최고 파주기 등의 요인들이 꽃게의 출하건수에 미치는 영향을 음이항 회귀모형을 통해 확인하고 모형적합을 시도하였다. 염분과 수온이 갑각류의 성숙 및 산란에 영향을 미치며, 특히 수온은 성장에 관여하는 대사 작용에 영향을 끼친다고 알려져 있고 최근 지구온난화로 인해, 얼음이 녹으면서 바다의 유의, 최대, 평균파고와 파주기, 그리고 수온까지 영향을 미치고 있어 꽃게 출하건수를 예측하는데 있어 중요한 변수라고 생각할 수 있다. 분석결과 꽃게의 출하건수에 영향을 주는 요인은 평균 풍속, 평균 기압, 평균 상대습도, 평균 해수온도, 최대 파고, 평균 파주기, 최대 파주기로 결정되었다. 꽃게의 출하건수는 평균 풍속, 평균 기압, 평균 상대습도, 평균 해수온도, 평균 파주기가 높을수록 증가하는 경향을 보이고 있고, 최대 파고, 최대 파주기가 낮을수록 꽃게의 출하건수는 증가하는 경향을 보이고 있었다.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.339-346
• /
• 2016

The aim of this research was to the experimental data using statistical and spectral analyzing method to get the motion reponses of a stern trawler in operation states such as drifting, sailing and trawling according to the wave height. In drifting, the significant and the maximum valuer of roll in beam sea increased according to the wave height, but those of pitch decreased. The response and the period of peak of roll in beam sea were increased, but those of pitch decreased. In navigation, the significant and maximum values of roll increased remarkably according to the wave height, but those of pitch changed a little. The response of roll was highest in quartering sea, beam sea and then following sea, but those of pitch was highest in bow sea, head sea and then beam sea in the order of all wave heights. The period of peak of roll due to the wave height and the wave direction changed from 3.8 to 9.9 seconds, and those of pitch changed from 3.3 to 10.4 seconds. In trawling, the significant and maximum values of roll increased a little according to the wave height, but those of pitch increased significantly. The response of roll was highest in beam sea, bow sea and then quartering sea, but those of pitch was highest in head sea, following sea, and then beam sea in the order. The period of peak of roll due to the wave height and the direction changed from 6.6 to 10.9 seconds, and those of pitch changed from 6.7 to 11.2 seconds.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.63-69
• /
• 2014

제주도 북동부 연안에서 추 동계에 관측된 파랑자료를 주파수 분석을 통해 파랑의 특성을 검토하였다. 그리고 최대파고를 산정하기 위해 1차 회귀식을 이용하여 유의파고와 최대파고를 비를 계산하였다. 또한, JONSWAP 스펙트럼을 계산하기 위해 계산 된 유의파고와 첨두주파수를 이용하여 관측해역에 맞는 ${\gamma}$값을 추정하였다. 그 결과, 유의파고의 경우 1 m이하의 파랑이 가장 높은 빈도를 가지고 발생하였으며, 1차 관측 시 평균 0.523 m로 관측이 되었고, 2차 관측 시 평균 0.423 m로 관측이 되었다. 그 중 가장 높은 유의파고는 9월 15일부터 9월 17일까지 발생된 태풍으로 인해 4.8 m로 관측되었다. 첨두주파수의 경우 0.12~0.15 Hz(주기는 약 6.67~8.33초)가 가장 높은 빈도로 나타났으며, 유의파고와 첨두 주파수를 이용하여 계산 된 ${\gamma}$값은 평균 2.72를 나타내고 있다. 또한 직선 회귀 식을 이용해 계산 된 유의파고와 최대파고의 비는 $1.635H_s$로 계산되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.216-221
• /
• 2001

In this paper, statistical properties of waves in the sea area of Pohang, Korea are examined absed on 1998-1999's wave data from directional wave buoy which is located Pohang(Janggigog). Wave data aquisition rate, monthly maximium, minimum and mean wave heights, frequency of wave direction are summarized. Wave height and period scatter diagrams and n-year return period wave heights are estimated. Wave periods of maximum wave heights are also estimated.