• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.35-42
• /
• 2012

This paper is about the implementation of low cost WiMAX remote radio head system with Ethernet instead of optical link. We deployed a simplified frame structure on the data frames transmitted between a basestation and remote radio heads in order to maximize Ethernet link utilization which shows relatively lower maximum throughput compared to that of optical links. In addition, a synchronization mechanism was applied on a basestation and remote radio heads placed on remote sites in order for simultaneous data transmission and reception in all remote radio heads which are essential for proper communication with terminals. These schemes are implemented with FPGA. The results of experiment with a WiMAX Femtocell show that our remote radio head systems efficiently deliver radio frames with proper timing.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.1-8
• /
• 2006

Network measurement is a vital part of network traffic engineering. In a network, the metric 'capacity' characterizes the maximum throughput the path can provide when there is no traffic load, or the minimum transmission rate among all links in a path. Pathrate is one of the most widely used network capacity measurement tools nowadays. It's famous for its accurate estimation result and non restriction of the temporal network traffic condition. After several years of development, its performance becomes more stable and reliable. Extant local modes detection algorithm in pathrate is based on statistic methodology histogram. This paper suggests a new algorithm for local modes detection based on ASH (Averaged Shifted Histogram). We have implemented this algorithm and will prove it can accomplish the same task as the original one with a better result.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.327-333
• /
• 2022

Internet Protocol Television (IPTV) has emerged as a personal entertainment source for home users. Streaming IPTV content over a wireless medium with good Quality of Service (QoS) can be a challenging task as IPTV content requires more bandwidth and Wireless Local Area Networks (WLANs) are susceptible to packet loss, delay and jitter. This research presents the capacity of IPTV using User Datagram Protocol (UDP) and TCP Friendly Rate Control (TFRC) over IEEE 802.11ac WLANs in good and bad network conditions. Experimental results show that in good network conditions, UDP and TFRC could accommodate a maximum of 78 and 75 Standard Definition Television (SDTV) users, respectively. In contrast, 15 and 11 High-Definition Television (HDTV) users were supported by UDP and TFRC, respectively. Performance of UDP and TFRC was identical in bad network conditions and same number of SDTV and HDTV users were supported by TFRC and UDP. With background Transmission Control Protocol (TCP) traffic, both UDP and TFRC can support nearly the same number of SDTV users. It was found that TFRC can co-exist fairly with TCP by giving more throughput to TCP unlike UDP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4617-4632
• /
• 2021

IEEE 802.11ax is a protocol being developed for high-density Wireless Local Area Networks (WLAN). Several algorithms have been proposed to improve the level of spatial reuse applied in IEEE 802.11ax. However, these algorithms are tentative and do not specify how to select the transmit power and carrier sense threshold in practice; It is unclear when and why the tuned parameters lead to better network performance. In this paper, we restricted the scale of transmit power tuning to prevent the case of backfire in which spatial reuse will result in transmission failure. If the restrictions cannot be satisfied, spatial reuse will be abandoned. This is why we named the proposed scheme as Arbitration based Spatial Reuse (ASR). We quantified the network performance after spatial reuse, and formulate a corresponding maximum problem whose solution is the optimal carrier sense threshold and transmit power. We verified our theoretical analysis by simulation and compared it with previous studies, and the results show that ASR improves the throughput up to 8.6% compared with 802.11ax. ASR can avoid failure of spatial reuse, while the spatial reuse failure rate of existing schemes can up to 36%. To use the ASR scheme in practice, we investigate the relation between the optimal carrier sense threshold and transmit power. Based on the relations got from ASR, the proposed Relation based Spatial Reuse (RSR) scheme can get a satisfactory performance by using only the interference perceived and the previously found relations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.60-66
• /
• 2011

LTE (Long Term Evolution) supports QoS (Quality of Service) with several service classes. For each class of traffic, a big difference exists on BER (Bit Error Rate) requirement. This leads to a considerable difference in transmission power for various classes of traffic. In this paper, a novel scheduler is designed and proposed for LTE which supports CoS (Class of Service) with the consideration of priority as well as target BER. By the CQI (Channel Quality Indicator) and QCI (QoS Class Identifier), a minimum transmission power is assigned from the target BER for each class of traffic per each user. Hence, with the other information such as user's used rate in the past and the priority of traffic, the probability of occupying channels is determined. The simulation results of Service Class scheduling are compared with that of Maximum Rate and Proportional Fair. The results show that the service class-aided scheduling can improve the throughput of whole system significantly.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.364-374
• /
• 2016

With vast amounts of spectrum available in the millimeter wave (mmWave) band, small cells at mmWave frequencies densely deployed underlying the conventional homogeneous macrocell network have gained considerable interest from academia, industry, and standards bodies. Due to high propagation loss at higher frequencies, mmWave communications are inherently directional, and concurrent transmissions (spatial reuse) under low inter-link interference can be enabled to significantly improve network capacity. On the other hand, mmWave links are easily blocked by obstacles such as human body and furniture. In this paper, we develop a multi-hop relaying transmission (MHRT) scheme to steer blocked flows around obstacles by establishing multi-hop relay paths. In MHRT, a relay path selection algorithm is proposed to establish relay paths for blocked flows for better use of concurrent transmissions. After relay path selection, we use a multi-hop transmission scheduling algorithm to compute near-optimal schedules by fully exploiting the spatial reuse. Through extensive simulations under various traffic patterns and channel conditions, we demonstrate MHRT achieves superior performance in terms of network throughput and connection robustness compared with other existing protocols, especially under serious blockage conditions. The performance ofMHRT with different hop limitations is also simulated and analyzed for a better choice of the maximum hop number in practice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5179-5202
• /
• 2018

Transmission Control Protocol (TCP) is the most widely used protocol in the cloud data centers today. However, cloud data centers using TCP experience many issues as TCP was designed based on the assumption that it would primarily be used in Wide Area Networks (WANs). One of the major issues with TCP in the cloud data centers is the Incast issue. This issue arises because of the many-to-one communication pattern that commonly exists in the modern cloud data centers. In many-to-one communication pattern, multiple senders simultaneously send data to a single receiver. This causes packet loss at the switch buffer which results in TCP throughput collapse that leads to high Flow Completion Time (FCT). Recently, Software-Defined Networking (SDN) has been used by many researchers to mitigate the Incast issue. In this paper, a detailed survey of various SDN based solutions to the Incast issue is carried out. In this survey, various SDN based solutions are classified into four categories i.e. TCP Receive Window based solutions, Tuning TCP Parameters based solutions, Quick Recovery based solutions and Application Layer based solutions. All the solutions are critically evaluated in terms of their principles, advantages, and shortcomings. Another important feature of this survey is to compare various SDN based solutions with respect to different performance metrics e.g. maximum number of concurrent senders supported, calculation of delay at the controller etc. These performance metrics are important for deployment of any SDN based solution in modern cloud data centers. In addition, future research directions are also discussed in this survey that can be explored to design and develop better SDN based solutions to the Incast issue.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.28-39
• /
• 2010

The study aims at offering a solution to the problems of transmission delay and data throughput decrease as the number of contending On-Board Units (OBU) increases by applying CSMA medium access control protocol based upon IEEE 802.11p. In a competition-based medium, contention probability becomes high as OBU increases. In order to improve the performance of this medium access layer, the author proposes EDCA which a adaptive adjustment of the Contention Windows (CW) considering traffic density and data type. EDCA applies fixed values of Minimum Contention Window (CWmin) and Maximum Contention Window (CWmax) for each of four kinds of Access Categories (AC) for channel-specific service differentiation. EDCA does not guarantee the channel-specific features and network state whereas it guarantees inter-AC differentiation by classifying into traffic features. Thus it is not possible to actively respond to a contention caused by network congestion occurring in a short moment in channel. As a solution, CWminAS(CWmin Adaptation Scheme) and ACATICT(Adaptive Contention window Adjustment Technique based on Individual Class Traffic) are proposed as active CW control techniques. In previous researches, the contention probabilities for each value of AC were not examined or a single channel based AC value was considered. And the channel-specific demands of IEEE 802.11p and the corresponding contention probabilities were not reflected in the studies. The study considers the collision number of a previous service section and the current network congestion proposes a dynamic control technique ACCW(Adaptive Control of Contention windows in considering the WAVE situation) for CW of the next channel.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.611-625
• /
• 2018

With innovative advances in wireless communication technology, many researches for extending network lifetime in maximum by using energy harvesting have been actively performed on the area of network resource optimization, QoS-guaranteed transmission, energy-intelligent routing and etc. As known well, it is very hard to guarantee end-to-end network delay due to uncertainty of the amount of harvested energy in multi-hop RF(radio frequency) energy harvesting wireless networks. To minimize end-to-end delay in multi-hop RF energy harvesting networks, this paper proposes an energy efficient routing metric based on interference aware and protocol which takes account of various delays caused by co-channel interference, energy harvesting time and queuing in a relay node. The proposed method maximizes end-to-end throughput by performing avoidance of packet congestion causing load unbalance, reduction of waiting time due to exhaustion of energy and restraint of delay time from co-channel interference. Finally simulation results using ns-3 simulator show that the proposed method outperforms existing methods in respect of throughput, end-to-end delay and energy consumption.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2003

In addition to wired communication technology, wireless communication technology has had communication revolution nowadays. Bluethooth technology carries out data/voice communication within pico-net. Nowadays the various services are supported by access network connected to public network. This paper presents implementation of bluetooth protocol analyser which simulates bluetooth protocol. MS window98 and visual C are used for development environment and application program is operated over the firmware loaded on the bluetooth device connected to the PC through UART which of the maximum transmission rate is 115kbps because transmission rate less than 20kbps affects rarely the performance. The performance analysis on the propose system is carried out as simulating the signalling information for the voice test and the traffics between two bluetooth systems for file transfer. The throughput analysis for file transfer service and call processing capacity for voice service are considered as performance analysis parameters. File access time is very important parameter and throughput is 13 kbps in case breakpoint time to file access is 0.04sec. Also call processing time is about 16.6ms in case of communication with the headset. The performance analysis of simulation results satisfies with bluetooth device development.