• 전력전자학회논문지
• /
• 제14권3호
• /
• pp.204-210
• /
• 2009

본 논문에서는 저분해능 위치센서를 갖는 표면부착형 영구자석 동기전동기의 새로운 전류센서 없는 단위 전류당 최대 토크 제어를 제안한다. 영구자석 동기전동기의 수학적 모델로부터 d축 전류를 추정하고, 추정된 d축 전류가 영(零)이 되도록 d축과 q축 전압지령 사이의 위상 각을 제어하여 단위 전류 당 최대 토크 제어를 구현한다. 제안된 방식은 동적 응답 특성이 느린 저가 응용 분야에 적합하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1474-1477
• /
• 2005

This paper is proposed maximum torque per ampere of induction motor using fuzzy-neural networks controller. Operation of maximum torque per ampere is achieved when, at a given torque and speed, the slip frequency is adjusted to that so that the stator current amplitude is minimized. This paper introduces a induction motor drive system with fuzzy-neural networks controller. A neural network-based architecture is described for fuzzy logic control. The characteristic rule and their membership function of fuzzy system are represented as the processing nodes in the neural network structure. This paper is proposed the analysis as well as the simulation results to verify the effectiveness of the new method.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.195-203
• /
• 2000

In this paper a new controller is proposed to operate the interior permanent magnet synchronous motor(IPMSM) by the control method of the maximum torque per ampere in constant torque region. The implementation method of the conventional torque controller is explained and analyzed exactly. The proposed controller does not use the torque and q-axis current of the speed controller but the amplitude of the stator current in order to utilize not only the magnetic alignment torque but also the reluctance in the constant region, gurantees the linearity of the torque, and is easily implemented. These attractive are verified through the experiment.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.160-167
• /
• 2018

This paper analyzed the effect of temperature on the permanent magnet flux and output torque. The major parameter which will impact the torque control accuracy of a surface mounted permanent magnet motor is the variation of the permanent magnet temperature. In addition, the temperature variation of the permanent magnet will also influence the maximum torque per ampere of the motor. To analyze the effect of temperature on the permanent magnet, the rotor of the motor was directly heated to measure the temperature and the permanent magnet flux was measured. As a result, the output torque of the motor decreases as the temperature of the rotor permanent magnet increases. Therefore, this paper proposes a technique to compensate the phase current of the motor by estimating permanent magnet flux, and it is proved through theoretical basis and several experiments.

• 전력전자학회논문지
• /
• 제15권2호
• /
• pp.142-149
• /
• 2010

매입형 영구자석 동기 전동기는 높은 효율과 빠른 동특성, 넓은 정출력 운전 영역 등의 장점 때문에 다양한 산업 분야에서 각광을 받고 있다. 특히 매입형 영구자석 동기기의 단위 전류당 최대 토크(Maximum Torque Per Ampere, MTPA) 운전 방법은 전동기의 최대 효율 운전을 위해서 필수적인 운전방법이 되었다. 이론적인 MTPA 운전점은 전동기의 제 정수에 의해 결정되는데, 매입형 영구자석 동기 전동기는 온도와 운전 영역에 따라 전동기 제 정수의 변화가 심하여 정확한 MTPA 운전을 하기 위해서는 전동기의 전 운전 영역에 대한 전동기 제 정수를 미리 알고 있어야 한다. 본 논문에서는 신호 주입 개념을 도입한 새로운 MTPA 운전 방법을 제안한다. 전류에 높은 주파수의 신호를 주입하여 그 주입된 신호에 의한 반응을 확인함으로 MTPA 운전점을 판별하게 된다. 이 방법은 전동기 제 정수 변동에 강인하며, 간단한 신호처리 과정을 통하여 MTPA 운전을 할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1262-1270
• /
• 2010

The next generation domestic high speed railway system is a power dispersed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor driven system due to their advantages in efficiency, noise reduction and maintenance. In this paper, the maximum torque control approach is presented for the IPMSM drives with reluctance torque. The applied control method uses maximum torque control per ampere technique. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.

• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.855-864
• /
• 2011

본 논문은 IPMSM(Interior Permanent Magnet Synchronous Motor)의 고성능 운전을 위해 비선형 제어를 기반으로 하는 적응 백스텝핑 제어기를 제안한다. 먼저 각속도의 추종성능을 향상시키기 위해서 비선형 백스텝핑 제어기를 설계한다. 파라메타 변동의 영향을 고려하지 않고 설계된 제어기는 고성능 운전이 어렵다. 부하토크의 변동에 대해 실시간 적응할 수 있는 파라메타 추정기를 설계에 포함하여 고성능 운전이 가능하게 한다. 또한 전동기의 효율적인 전력소비를 위하여 최대토크를 얻기 위한 최소전류의 운전을 할 수 있도록 제어기를 설계하였다. 제안된 제어기로 2마력급의 IPMSM에 적용하여 각속도 레퍼런스에 대한 추종성능과 부하토크 변동에 대한 추정, 그리고 MTPA(Maximum Torque per Ampere) 운전을 시험하여 일정토크 운전영역에서 안정화된 강건한 제어기임을 시뮬레이션을 통해 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.956-967
• /
• 2019

This paper introduces a virtual signal injected maximum torque per ampere (MTPA) control strategy for direct-torque-controlled five-phase interior permanent magnet synchronous motor (IPMSM) drives. The key of the proposed method is that a high frequency signal is injected virtually into the stator flux linkage. Then the responding stator current is calculated and regulated to compensate the amplitude of the flux linkage. This is done according to the relationship between the stator current and the stator flux linkage. Since the proposed method does not inject any real signals into the motor, it does not cause any of the problems associated with high-frequency signals, such as additional copper loss and extra torque ripple. Simulation and experimental results are offered to verify the effectiveness of the proposed method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.363-366
• /
• 2009

The maximum output torque developed by the machine is dependent on the allowable current rating and maximum voltage that the inverter can supply to the machine. Therefore, to use the inverter capacity fully, it is desirable to use the control scheme considering the voltage and current limit condition, which can yield the maximum torque per ampere over the entire speed range. This controller is controlled speed and current using hybrid PI(HBPI) controller and estimation of speed using ANN. Also, this paper is proposed control of maximum torque per ampere(MTPA) of induction motor. This strategy is proposed which is simple in structure and has the honest goal of minimizing the stator current magnitude for given load torque. The performance of the proposed induction motor drive with maximum torque control using HBPI controller is verified by analysis results at dynamic operation conditions.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.185-191
• /
• 2005

In this paper, a new approach for the Synchronous Reluctance Motor control which ensures producing Maximum Torque per Ampere(MTPA) over the entire field weakening region is presented. In addition, This paper presents a speed sensorless control scheme of SynRM using artificial neural network. Also, by adjusting the base speed for the field weakening operation according to the flux level, the current and voltage limit, the smooth and precise transition into the field weakening operation can be achieved. The proposed scheme is verified validity through simulation.