• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.338-341
• /
• 2006

The growth characteristics of sulfur-oxidizing bacteria, Acidithiobacillus thiooxidans AZ11, MET, and TAS were investigated in mineral salt media supplemented with elemental sulfur of 1$\sim$50 g $L^{-1}$. The sulfur oxidation rates of A. thiooxidans. MET and TAS increased highly with increasing sulfur concentration up to 10 g L$^{-1}$, but the rates increased slowly in sulfur concentration over 10 g L$^{-1}$. A. thiooxidans AZ11 showed the parallel increase of sulfur oxidation rate until sulfur concentration increased up to 40 g L$^{-1}$. The maximum sulfur oxidation rates (V$_{max}$) of AZl1, MET and TAS were 1.88, 1.38 and 0.43 g S L$^{-1}$ d$^{-1}$, respectively. The maximum specific growth rates (${\mu}_{max}$) of AZ11, MET, and TAS were 0.33 d$^{-1}$, 0.30 d$^{-1}$ and 0.45 d$^{-1}$, respectively. Although MET and TAS couldn't grow at sulfate concentration of 40 g L$^{-1}$, AZ11 could grow in the presence of 58 g L$^{-1}$ sulfate, the final oxidation product of elemental sulfur.

• Journal of Plant Biology
• /
• v.25 no.4
• /
• pp.153-160
• /
• 1982

The kinetics of $^{14}C$ fixation have been investigated in Anabaena flos-aquae growing on ${NH}_4+$,$NO_3-$ and $NO_2-N$ in batch cultures. Growth rate was highest with ${NH}_4+$, followed by $NO_2-$ and finally $NO_2$. The compensation intensity($I_0$) and the half-saturation irradiance($K_1$) with $K_1$ were higher than with other N sources, but the maximum C fixation rate($P_{max}$) was lower. The ($P_{max}$)/$K_1$ ratio, which is analogous to quantum efficiency at low irradiance ranges, was also lower with $N_2$. All these parameters except $K_1$ decrease with culture age, or decreasing growth rate. Since $^{14}C$ uptake measures net photosynthesis, the higher values of $I_0$ and $K_1$, and the low values of $P_{max}$/$K_1$ ratio with $N_2$ appear to be related to the high energy demand of $N_2$fixation. They may also be related to the lox maximum growth rate with $NO_2-N$.

• The Korean Journal of Ecology
• /
• v.14 no.2
• /
• pp.211-230
• /
• 1991

The germinatin of e. annuus continued from the middle ofmay to mid-october. The maximum germination occurred on the mid-july. The period bloom of was distingushed amongs the different growth forms ; a orm pr of biennial and a form of pr perennial flowering from the mid-may to mid-september, and a form ps biennial blossom from the beginning of October to earlynovember. the dispersal of seed for(a form pr)occurred from early June to the mid-september. A rotte, germinating from summer to autumn, could classified into several growth forms; individuals without a critical leaf area for bolting until september and October, become a form ps of biennial, whicth did not proceed toreproductive growth unitl the next year, even thought wintering. individuals flowered on 3 years after germination become a form pr of perennial. The growth formular of aform pr of bennial, grown in a pot was w=20.2[1+$3.36{\times}10^3$(-0.062t)]$^{-1}$. The maximum relative growth rate(rgr) was 0.062g/g/day and the maximum net assimlation rate(nar) 0.089g/g/day. Therelative growth among each organ was shown as R=0.12 $T^{1.15}$between the avove-ground part(t) and the below- ground part(r). the relation between the avove-ground part(t) and the ratio of stem weight(wi) was ws/wi=2.56 $T^{0.35}$. n.p.k. was largely distributed on a leaf throughoutthe total growth period. while growing, it tended to decrease on the vegetative organ gut vice versa on the reproductive organ. however, nitrogen was more widely distributed on a leaf then in the reproductive organ.

• Mycobiology
• /
• v.31 no.3
• /
• pp.173-178
• /
• 2003

India has maximum genetic materials in early cauliflower, which grow in subtropical conditions. Different disease parameters like linear growth, maximum growth rate per day, AUDPC, apparent infection rate and percent diseased area were calculated in artificially inoculated plants. Apparent infection rate is not co-related with the black rot disease incidence and should never be considered during characterization of disease resistance and varietal screening. Based on the above disease parameters Kunwari-18, Phool Gobhi Kunwari, Kataki-7 and BT-10-2 were selected as moderately resistance to black rot in early cauliflower. These lines can be used for black rot prone area and also for black rot disease improvement programme. Considering the qualitative and quantitative parameters, slow rotting resistance cauliflower lines are selected as such for cultivation and would be best suited in integrated disease programme.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.16-23
• /
• 1999

Deposition of parylene (PA) films has been explored at substrate temperatures below 2$0^{\circ}C$ and pressures below 4 torr. The film thickness was measured using AFM and the film thickness measured was 3,500-12,000$\AA$ and the growth rate was 20-70$\AA$/min. T도 dielectric constant of the deposited PA films was found to be 2.66 and the dielectric strength was in excess of 2$\times$105V/cm. The growth rate became a maximum at a precursor decomposition temperature of $600^{\circ}C$. It was found that the growth rate decreased with increasing substrate temperature, whereas it increased with increasing pressure. At a precursor decomposition temperature of 75$0^{\circ}C$ or at a deposition pressure above 1 Torr the film surface became rough due to particle formation in the gas phase. The condensation of a p-xylylene monomer on the substrate surface turned out to be a rate-limiting step in the growth of the PA films.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.353-359
• /
• 1987

The aim of the present study was to investigate the effects of growth rate on the biosynthesis of tylosin in Streptomyces fradiae. In order to elucidate the relation between the growth rate and the tylosin formation rate, the activities of enzymes involved in oxaloacetate metabolism were determined using cells grown at different growth rates in chemostats. As the results, it was found that the specific rate of tylosin formation($q_{p}$) was closely related to the specific cell growth rate and the maximum value of $q_{p}$ was 1.1mg tylosin, $q_{p}$ cell, $0.013h^{-1}$ at the growth rate $0.013h^{-1}$. However further increase in the growth rate over $0.013h^{-1}$ resulted in apparent decrease of $1_{p}$. The synthesis and activities of citrate synthase, aspartate aminotransferase, and PEP carboxylase were very low at lower growth rate. On the other hand, the activity and synthesis of methylmalonyl-CoA carboxyltransferase was closely related to tylosin formation. Therefore it was concluded that tylosin formation was apparently controlled by the growth rate.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.194-198
• /
• 2005

Growth curves of Listeria monocytogenes in modified surimi-based imitation crab (MIC) broth were obtained by measuring cell concentration in MIC broth at different culture conditions [initial cell numbers, $1.0{\times}10^{2},\;1.0{\times}10^{3}\;and\;1.0{\times}10^{4}$, colony forming unit (CFU)/mL; temperature, 15, 20, 25, 37, and $40^{\circ}C$] and applied to Gompertz model to determine microbial growth indicators, maximum specific growth rate constant (k), lag time (LT), and generation time (GT). Maximum specific growth rate of L. monocytogenes increased rapidly with increasing temperature and reached maximum at $37^{\circ}C$, whereas LT and GT decreased with increasing temperature and reached minimum at $37^{\circ}C$. Initial cell number had no effect on k, LT, and GT (p > 0.05). Polynomial and square root models were developed to express combined effects of temperature and initial cell number using Gauss-Newton Algorism. Relative coefficients of experimental k and predicted k of polynomial and square root models were 0.92 and 0.95, respectively, based on response surface model. Results indicate L. monocytogenes growth was mainly affected by temperature and square root model was more effective than polynomial model for growth prediction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.931-936
• /
• 2009

Body weights of 862 Angora goats between birth and 36 months of age, recorded on a semiyearly basis from 1988 to 2000, were used to estimate genetic, permanent environmental and phenotypic covariance functions. These functions were estimated by fitting a random regression model with 6th order polynomial for direct additive genetic and animal permanent environmental effects and 4th and 5th order polynomial for maternal genetic and permanent environmental effects, respectively. A phenotypic covariance function was estimated by modelling overall animal and maternal effects. The results showed that the most variable coefficient was the intercept for both direct and maternal additive genetic effects. The direct additive genetic (co)variances increased with age and reached a maximum at about 30 months, whereas the maternal additive genetic (co)variances increased rapidly from birth and reached a maximum at weaning, and then decreased with age. Animal permanent environmental (co)variances increased with age from birth to 30 months with lower rate before 12 months and higher rate between 12 and 30 months. Maternal permanent environmental (co)variances changed little before 6 months but then increased slowly and reached a maximum at about 30 months. These results suggested that the contribution of maternal additive genetic and permanent environmental effects to growth variation differed from those of direct additive genetic and animal permanent environmental effects not only in expression time, but also in action magnitude. The phenotypic (co)variance estimates increased with age from birth to 36 months of age.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.18-27
• /
• 2020

An actual fire test was performed on single combustibles placed in a local cinema complex, and quantitative differences in the maximum heat release rate (HRR) and fire growth rate were investigated based on the design fire curve methods (i.e., the general and 2-stage methods). In terms of combustible use and fire load, a total of 12 combustibles were selected, classified into cinema lounge and movie theater. It was found that the maximum HRR and fire growth rate determined using the two-stage method were quantitatively different from those of the general method. The application of the two-stage method, which can be used to determine the fire growth rate of the initial fire stage more precisely, could be useful in accurately predicting the activation time of fire detectors and fire-extinguishing facilities, as well as the available safe egress time (ASET) and required safe egress time (RSET).

• KSBB Journal
• /
• v.15 no.3
• /
• pp.247-253
• /
• 2000

This study was aimed to enhance polycyclic aromatic hydrocarbon(PAHS) biodegradation rate by repeated-batch treatment using immobilized cells of Phanerochaete chrysosporium. In the repeated-batch operations with 30 mg/L of pyrene the maximum degradation rate was 6.58 mg/L day. As the number of batches increased the concentration of immobilized cells significantly decreased and the degradation rate and specific acitivity gradually increased to a maximum value and then decreased. To have PAH degradation activity and cell mass recovered one batch of cultivation using the growth medium instead of the PAH-degrading medium was carried in the course of repeated-batch operations. This maximum degradation rates of pyrene and anthracene were 4.29 and 4.46 mg/L$.$day respectively. Overall the rate of PAH degradation could be enhanced 2.5-30 folds by using immobilized cells compared to the case of using suspended cells.