• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2007

Combined method of extraction chromatography and liquid scintillation analysis was established for determinating $^{55}Fe\;and\;^{63}Ni$ radioactivity in solid samples. Activated concrete wastes generated from dismantling KRR-2 were analysed. The sequential separation including precipitation and extraction chromatography resulted in the above 90% chemical recoveries of Fe. Above 62% recoveries of Ni were obtained by this procedure exception to 43.6 and 46.5% recoveries. The seperation and counting procedure was also confirmed with spiked samples of known quantity. The measured and spiked quantity were agreed with the 3.7% and 0.7% variations in the $^{55}Fe\;and\;^{63}Ni$ experiments, respectively. The radioactivities of $^{55}Fe$ in the dismantled concretes are shown from below MDA to maximum 362 Bq/g. The radioactivities of $^{63}Ni$ in all concrete samples are below MDA. The $^{63}Ni$ doesn't exist in dismantled concretes from KRR-2. The radioactivity of $^{55}Fe$ is decreased rapidly as the sampling depth is increased from the concrete surface.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.242-249
• /
• 2006

Potential impacts of the future climate change on crop production can be inferred by crop simulations at a landscape scale, if the climate data may be provided at appropriate spatial scales. Northern Gyunggi Province is one of the few prospective regions in South Korea for growing quality soybeans. Any geographical shift of production areas under the changing climate may influence the current land planning policy in this region. A soybean growth simulation was performed at 342 land units in northern Gyunggi province to test the potential geographical shift of the current production areas for quality soybeans in the near future (form 2011 to 2100). The land units for soybean cultivation were selected by the land use, the soil characteristics, and the minimum arable land area. Daily maximum and minimum temperature, precipitation, the number of rain days and solar radiation were extracted for each land unit from the future digital climate models (DCM, 2011-2040, 2041-2070, 2071-2100). Daily weather data for 30 years were randomly generated for each land unit for each normal year by using a well-known statistical method. They were used to run CROPGRO-Soybean model to simulate the growth, phonology, and yields of 3 cultivars representing different maturity groups grown at 342 land units. According to the model calculations, the warming trend in this region will accelerate the flowering and physiological maturity of all cultivars, resulting in a 7 to 9 days reduction in overall growing season and a 1 to 15% reduction in grain yield of early to medium maturity cultivars. There was a slight increase in grain yield of the late maturing cultivar under the projected climate by 2070, but a decreasing tend was dominant by the year 2100.

• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.175-188
• /
• 1998

This paper describes the internal structures and K-Ar ages of fault gouges collected from the Dongnae fault zone. This fault zone is internally zoned and occurs in the multiple fault cores. A fault core consists of thin gouge and narrow cataclastic zones that are bounded by a much thicker damage zone. Intensity of deformation and alteration increases from damage zone through cataclastic zone to gouge zone. It is thought that cataclasis of brittle deformation was the dominant strain-accomodation mechanism in the early stage of deformation to form the gouge zone and that crushed materials in the regions of maximum localization of fault slip subsequently moved by cataclastic flow. Deformation mechanism drastically changed from brittle processes to fluid-assisted flow along the gouge zone as the high porosity and permeability of pulverzied materials during faulting facilitated the influx of the hydrothermal fluids. Subsequently, the fluids reacted with gouge materials to form clay minerals. Fracturing and alteration could have repeatedly taken place in the gouge zone by elevated fluid pressures generated from the reduction of pore volume due to the formation of clay minerals and precipitation of other materials. XRD analysis revealed that the most common clay minerals of the gouge zones are illite and smectite with minor zeolite and kaolinite. Most of illites are composed of 1Md polytype, indicating the products of hydrothermal alteration. The major activities of the Dongnae fault can be divided into two periods based upon K-Ar age data of the fault gouges : 51.4∼57.5Ma and 40.3∼43.6Ma. Judging from the enviromental condition of clay mineral formation, it is inferred that the hydrothermal alteration of older period occured at higher temperature than that of younger period.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.63-69
• /
• 2006

We isolated a bacterium which produces antifungal substances from the Lake of Saimaa soils in Fin-land. The isolated strain was identified as Bacillus sp. and shown a strong antifungal activity on plant pathogenic fungi. Bacillus sp. KMU-1011 produced maximum level of antifungal substances under incubation aerobically at $24^{\circ}C$ for 48 hours in nutrient broth containing 1.0% glucose and 1.0% polypeptone at 180 rpm and initiated pH adjusted to 6.0. Precipitate of culture broth by $30{\sim}60%$ ammonium sulfate precipitation exhibited strong antifungal activity against Botrytis cinerea KACC 40573 by dry cell weight. Chloroform extract of cultured broth also shown fungal growth inhibitory activity against C. gloeosporioides KACC 40804, D. bryoniae KACC 40669, F. oxysporum KACC 40037, F. oxysporum KACC 40052, F. oxysporum f. sp. radicis-lycopersici KACC 40537, F. oxysporum KACC 40902, M. cannonballus KACC 40940, P. cambivora KACC 40160, R. solani AG-1 KACC 40101, R. solani AG-4 KACC 40142, and S. scleotiorum KACC by agar diffusion method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.271-275
• /
• 1999

The chemical and gelling properties of porphyran from Porphra yezoensis collected from Buan and Wido in Korea at different months of the year were studied. Crude porphyran was prepared by hot-water extraction and further purified by cetylpyridinium chloride precipitation, Crude porphyran and porphyran were modified by alkali treatment to eliminate sulfate. The yields of alkali-modified crude porphyran (AMCP) and porphyran(AMP) were between $4.9\~10.9\%$ and $4.0\~6.7\%$ of the dried algae weight and were maximum in February for Buan and January for Wido, respectively. Gel strength of AMCP were highest in February ($790g/cm^2$) for Buan and January ($740 g/cm^2$) for Wido. Alkali modification increased 3,6-anhydro galactose content and the molar ratio of galactose and 3,6-anhydrogalactose of AMCP and AMP showed 1 : 0,8$\~$1.1. GLC and FT-IR measurement of AMP showed that most of sulfate residues were combined to C-6 of galactose, Thus, results of this study suggest that crude porphyran extracted from Porphra yezoensis produces an agar of a reasonably good quality after alkali treatment.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1035-1043
• /
• 1999

Bacteriocins are natural antimicrobial compounds produced by many microorganisms associated with foods, so that there is currently much interest in their use as food biopreservatives. Goal of this study was to partially evaluate lacticin NK24 as a food biopreservative by showing antimicrobial activity of L. lactis NK24 and lacticin NK24 against food-borne spoilage and pathogenic bacteria, respectively. Lactic acid bacteria NK24 isolated from jeot-gal, Korean fermented fish foods, was tentatively identified as Lactococcus lactis and showed broad spectrum of activity against all of spoilage and pathogenic bacteria tested by deferred method. Bacteriocin production in jar fermenter was detected at the mid-log growth phase, and reached the maximum at the early stationary phase, but decreased after the stationary phase. Lacticin NK24 was partially purified by 75% ammonium sulfate precipitation followed by subsequent dialysis. This partially purified lacticin NK24 showed antimicrobial activity against Enterococcus faecalis, Staphylococcus aureus, Staphylococcus epidermidis, Clostridium perfringens, some bacilli, Listeria monocytogenes, Listeria ivanovii, Sphin-gomonas pausimobilis, Escherichia coli and Pseudomonas aeruginosa. Thus, lacticin NK24 examined in this study show promise as a biopreservative be-cause of their broad spectrum of activity.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.185-194
• /
• 2012

The purpose of this contribution is to develop the framework of a methodology for identifying potential errors in georeferencing and in an application of it using specimens of Ox-Knee, Achyranthes bidentata Blume in Korea. At infraspecific level, uncertainty of identification showed that 41% of A. bidentata var. japonica and 28% of var. bidentata were misidentified, suggesting that the uncertainty level was independent of the reliability of experts' identification. For georeference specimen records, 71 specimens out of total 303 were selected and utilized as occurrence data: Uncertainty was 32.4 km at maximum and was 0.1297 km at minimum (mean = 4,055 m, s.d. = 5,772 m). Var. japonica is common throughout most of the southeastern Korea and west coastal areas, while var. bidentata has been found as far north as Gyeonggi and Gangwon provinces. We modelled the potential distribution of two varieties using Bioclim approach in Korea based on several environmental factors. Our results indicated the most important region for var. japonica lies the west coast ranges and southern area, while for Chungcheongnam-do of potential high diversity occurs for var. bidentata. This study shows that the major factors to determine the distribution patterns of two varieties were thermal factors, rather than precipitation. The Bioclim model using geocode and georeferencing data makes the information increasingly useful and reliable. To improve data quality, it requires full management from data collection to final databases including data cleaning.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.22 no.1
• /
• pp.1.1-15
• /
• 1994

The transports of the seasonal freshwater and salt from surface to 500 m depth in the tropical Atlantic Ocean are derived from the equations of the continuity and saltconservation, respectively. The freshwater transport is obtained by southward integration of the divergence of surface freshwater flux, using climatological freshwater(i. e. precipitation, evaporation, and river discharge) data. The annual freshwater transport is northward, ranging from 0 Sv near the equator to 0.3 Sv at $12^{\circ}{\;}N{\;}and{\;}20^{\circ}{\;}S$. The seasonal meridional transport amounts of freshwater range from 1.35 Sv to-0.45 Sv. The strong northward freshwater transports prevail for the intraseasonal period summer to fall. This seasonal cycle is caused by the shifts of the ITCZ as well as the changes in the local freshwater storage. Annual and seasonal salt transports are calculated from objectively analyzed historical (1900-86) salinity observations. The annual salt flux in the ocean zero, showing that the salt flux by horizontal advection balances the flux by horizontal diffusion. The salt flux due to the diffusion is northward, and has a maximum of $5{\;}{\times}{\;}10^6kg/s$ at 15oN. Seasonal transport amounts of salt range from $30{\;}{\times}{\;}10^6kg/s{\;}to{\;}-35{\;}{\times}10^6kg/s$. The direction of the seasonal salt transports is northward except for the intraseasonal period summer to fall.

• Journal of the Korean earth science society
• /
• v.41 no.5
• /
• pp.459-468
• /
• 2020

In this study, the selection criteria for the occurrence of sea breezes in the Boseong area during the spring season (March-May) of 2016-2017 were prepared for the analysis of vertical weather characteristics. For this purpose, wind speed values were determined using the measured precipitation, cloud volume, wind direction, the difference between the ground and sea temperature, a wind Profiler at an altitude of 1 km, and numerical model data. The dates of the sea breezes in Boseong were classified according to the selection criteria, and the spatial and temporal characteristics of the sea breezes were identified by analyzing the time and altitude of the sea breeze and the size of the wind speed. Sea breezes occurred 23 out of 183 days (12%), and in Boseong, at least 1.2 out of 10 spring days exhibited sea breezes. Sea winds ranged from 1200 to 1800 LST, mainly from ground to 700 m altitude during the day. In addition, the maximum wind speed averaged 4.9 m s^-1, at an altitude of 40 m at 1600 LST, showing relatively lower values than those in a preceding study. This seems to be owing to the reduction in wind speed due to the complexity of the coastal terrain.