• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.23-30
• /
• 2005

The capacity spectrum method(CSM) can be used for the evaluation of inelastic maximum response of structures and has been recently used in the seismic design using the incorporation of pushover analysis and response spectrum method. To efficiently evaluate seismic performance of multi-degree-of freedom(MDOF) bridge structures, it is important that the equivalent response of MDOF bridge structures should be calculated. To calculate the equivalent response of MDOF system, equivalent responses are obtained by using Song method, Fajfar method and Calvi method. Also, those responses are applied to CSM method and seismic performance of bridge according to the ESDOF method are compared and evaluated straightforwardly.

• Journal of the Korean Ceramic Society
• /
• v.13 no.4
• /
• pp.25-35
• /
• 1976

Mullite was synthesized by using kaolin and $\alpha$-alumina, and halloysite and aluminum hydroxide as raw materials at the various temperature in the range of 1200$^{\circ}$-1750$^{\circ}$C. The degree of mullitization was measured respectively by a quantitative X-ray diffraction method and a chemical analysis method. The rate and the maximum degree of mullitization were found to increase with temperature . The reaction completed at 1600$^{\circ}$Cfor less than 30 minutes, and yielded 98% mulllite inpurity in the case of kaolin-Al(OH)3. TiO$_2$ up to 3% was added to the batches of kaolin-Al(OH)$_3$. the effect of addition on the mullitization was investigated and found to decrease the sintering temperature for the mullitization. The mechanism of TiO$_2$ addition on the formation of mullite was also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.232-238
• /
• 2003

In this paper, we propose a spatially adaptive image restoration algorithm using local statistics. The local mean, variance, and maximum values are utilized to constrain the solution space, and these parameters are computed at each iteration step using partially restored image. A parameter defined by the user determines the degree of local smoothness imposed on the solution. The resulting iterative algorithm exhibits increased convergence speed when compared to the non-adaptive algorithm. In addition, a smooth solution with a controlled degree of smoothness is obtained. Experimental results demonstrate the capability of the proposed algorithm.

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.911-920
• /
• 2013

Experimental studies on both subcooled and saturated pool boiling of water were performed to obtain local heat transfer coefficients on a $3^{\circ}$ inclined tube of 50.8 mm diameter at atmospheric pressure. The local values were determined at every $45^{\circ}$ from the very bottom to the uppermost of the tube periphery. The maximum and minimum local coefficients were observed at the azimuthal angles of $0^{\circ}$ and $180^{\circ}$, respectively, in saturated water. The locations of the maxima and the minima were dependent on the inclination angle of the tube as well as the degree of subcooling. The major heat transfer mechanisms were considered to be liquid agitation generated by the sliding bubbles and the creation of big size bubbles through bubble coalescence. As a way of quantifying the heat transfer coefficients, an empirical correlation was suggested.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.581-585
• /
• 2017

To strengthen the quality control of aquatic drugs, we compared the internal and external(EU, USA and Japan) aquatic drug classification systems and proposed a new aquatic drug classification system. Aquatic drugs are classified on the basis of their functional the functional characteristics or safety management degree of aquatic drugs. We suggested that the aquatic drugs can be categorized into 7 levels according to their functional characteristics and classified into 3 levels according to the safety management degree of aquatic drugs.

• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.48-54
• /
• 1995

Coupling of tetracycline(Tc) to dithiocarbamate chitosan(DTCC) via chelate bond was investigated varying reaction time, concentration, temperature, pH, and Ca(II)/Tc ratio. The amount of Tc bound to matrix increased to give a maximum and decreased as the reaction proceeded. The degree and rate of dissociation of Tc complex were affected by the reaction temperature, and pH. By running the reaction at low temperature and pH, the degree of dissociation was greatly diminished. Properties of drug-release from DTCC-Ca(II)-Tc complex were studied by batch- and flow-method and release of Tc and CA(II) by flow method followed nearly zero-order. DTCC-Ca(II)-Tc showed very prolonged antimicrobial activity compared to that of free Tc.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.271-273
• /
• 1993

One maglev vehicle is composed of 6 or 8 modules. Each module is composed of 4 staggered magnets attached to an aluminum bogie. In the view point of levitation control except propulsion-by LIM. 5 is the maximum degree of freedom to be controlled. But rolling control of the vhhicle depends on the bogie structure. We describe just anti-roll type bogie structure and 4 degree of freedom control is sufficient for levitation quality improvement. Multivariable pole-placement concept is used for controller design. Control experiment is performed on a specially designed test module as well as actual bogie system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.220-225
• /
• 2003

In this paper, various types of racing line are analyzed for the best time to go through a 90 degree comer. 'Best' means the least time, at the greatest average speed. The comer concerned here has the long straights before and after the corner so that the vehicle is able to n with its maximum speed along the straights. It is shown that both inside and outside driving lines including the modified outside driving lines never beat classical racing line. It is also found that outside driving line is better than inside driving inside driving line as long as there are straight lines before and after the comer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.429-435
• /
• 1998

Experiments were conducted to investigate the turbulent flow characteristics from on oblique impingement surface to an plane jet at the jet Reynolds number(Re based on the nozzle width) $3{\times}10^4$ The jet mean velocity and turbulent intensity profiles have been measured along the impingement surface by hot-wire anemometer. The nozzle-to-plate distance(H/B) ranged from 2 to 10 and the oblique angle (a) from 45 to 90 degree. Also the secondary peak of the turbulent intensity was observed at H/B=4 S/B 5 and a=90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreased and the position of the stagnation point nearly coincided with that of the maximum turbulent intensity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.615-622
• /
• 2000

Numerical simulation is performed with Denton's code to get pressure loss coefficients in wide range of reverse flow incidence(from -90 degree to +85 degree) for an axial compressor cascade. As a results, it is found that the pressure loss coefficient is increased with incidence and there exist critical incidence which corresponds to the maximum pressure loss coefficient. Pressure loss coefficient with bigger incidence than its critical value is decreased. The effect of increasing incidence in a cascade extremely reduce the mass flow rate by the large flow separation region. Consequently this effect reduce the portion of dynamic pressure in the total pressure loss and beyond the critical incidence the pressure loss coefficient decrease.