• 한국식품영양학회지
• /
• 제9권4호
• /
• pp.424-429
• /
• 1996

전분의 첨가가 냉동면의 조직감과 관능적 특성에 미치는 영향을 밝히기 위하여 감자초산변성전분, 옥수수초산변성전분, 찰옥수수전분, 옥수수전분, 감자전분, 밀전분 등 6종의 전분을 함량별로 첨가하여 복합분을 제조하였다. 이들의 아밀로그래프, 제면시의 조리시험, 냉동, 해동후 면의 최대절단강도를 측정하고 관능평가하였다. 감자초산변성전분과 감자전분을 첨가한 복합분의 호화개시온도는 대조구인 소맥분 100%보다 다소 낮아졌다. 최고점수는 초산변성전분류, 찰옥수수, 감자전분을 첨가한 경우 다소 높아졌다. 조리시의 체적과 중량은 다소 증가하고 고형분 용출량은 변성전분과 찰옥수수전분을 참가한 경우 다소 감소하였다. 냉동, 해동 조리 후 면의 최대절단강도는 감자초산변성전분 15%와 20%, 옥수수초산변성전분 15%를 첨가한 경우에 대조구보다 커졌다. 감자전분을 제외한 나머지 5종의 전분을 첨가시에 냉동면의 조직감과 색깔이 다소 향상되는 것으로 나타났다. 그 중에서 감자초산변성전분의 효과가 가장 높았다.

• 한국축산식품학회지
• /
• 제32권1호
• /
• pp.62-67
• /
• 2012

This study calculated kinetic parameters of Escherichia coli O157:H7 and developed a probabilistic model to estimate growth probabilities of E. coli O157:H7 on polyethylene cutting boards as a function of temperature and time. The surfaces of polyethylene coupons ($3{\times}5$ cm) were inoculated with E. coli O157:H7 NCCP11142 at 4 Log $CFU/cm^2$. The coupons were stored at 13 to $35^{\circ}C$ for 12 h, and cell counts of E. coli O157:H7 were enumerated on McConkey II with sorbitol agar every 2 h. Kinetic parameters (maximum specific growth rate, Log $CFU/cm^2/h$; lag phase duration, h; lower asymptote, Log $CFU/cm^2$; upper asymptote, Log $CFU/cm^2$) were calculated with the modified Gompertz model. Of 56 combinations (temperature${\times}$time), the combinations that had ${\geq}$0.5 Log $CFU/cm^2$ of bacterial growth were designated with the value of 1, and the combinations that had increases of <0.5 Log $CFU/cm^2$ were given the value 0. These growth response data were fitted to the logistic regression to develop the model predicting probabilities of E. coli O157:H7 growth. Specific growth rate and growth data showed that E. coli O157:H7 cells were grown at $28-35^{\circ}C$, but there were no obvious growth of the pathogen below $25^{\circ}C$. Moreover, the developed probabilistic model showed acceptable performance to calculate growth probability of E. coli O157:H7. Therefore, the results should be useful in determining upper limits of working temperature and time, inhibiting E. coli O157:H7 growth on polyethylene cutting board.

• 터널과지하공간
• /
• 제33권6호
• /
• pp.519-533
• /
• 2023

본 연구에서는 평균 압축강도가 100 MPa 이상인 암석에 대해 픽커터의 선형절삭시험을 실시하였고, 적외선 열화상 카메라를 통해 측정된 픽커터 절삭 시의 발생 온도와 커터 작용력과의 상관관계를 분석하였다. 모든 시험조건에서 최대 온도는 치핑이 발생하는 암석면에서 측정되었고, 암석에 발생한 온도는 픽커터의 작용력과 밀접한 상관관계를 나타내었다. 반면, 픽커터에 발생하는 온도는 대기 온도 대비 최대 36℃ 이내로 상승하였고 커터 작용력과의 상관관계도 뚜렷하지 않았다. 이는 실험실 조건의 짧은 절삭거리와 텅스텐 카바이드 삽입재의 높은 열전도 특성이 원인인 것으로 사료된다. 단, 픽커터의 주요 부위 중에 텅스텐 카바이드 삽입재에 상대적으로 높은 온도가 유지되는 것으로 나타나, 픽커터 절삭 성능의 유지를 위해서는 삽입재와 헤드부 사이에 보강을 실시하거나 픽커터 제작 시에 은납 공정의 품질을 향상시키는 것이 필요할 것으로 판단된다.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.323-330
• /
• 1989

Wear restance titanium carbonitride (TiCN) films were deposited on the SKH9 tool steels and WC-Co cutting tools by plasma assisted chemical vapor deposition (PACVD) using a gaseous mixture of TiCl4, CH4, N2, H2 and Ar. The effects of the deposition temperature and RF(Radio Frequency) power on the deposition rate, chlorine content and crystallinity of the deposited layer were studied. The experimental results showed that the stable and adherent films could be obtained above the deposition temperature of 47$0^{\circ}C$ and maximum deposition rate was obtained at 485$^{\circ}C$. The deposition rate was much affected by RF power and maximum at 40W. The crystallinity of the deposited layer was improved with increasing the deposition temperature and RF power. The TiCN films deposited by PACVD contained much chlorine. The chlorine content in the TiCN films was affected by deposition conditions and decreased with improving the crystallinity of the deposited layer. The deposited TiCN films deposited at the deposition temperature of 52$0^{\circ}C$ and RF power of 40W had an uniform surface with very fine grains of about 500$\AA$ size. The microhardness of the deposited layer was 2,300Kg/$\textrm{mm}^2$.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.894-903
• /
• 2011

In this paper, the capability index is introduced in order to improve the reliability of new concept machine tools and the method to improve the machine accuracy from the analysis of cutting process, statistical methodology and influence factors are proposed. In addition, the rib structure of bed and column in machine tools is analyzed by using the thermal impact method in order to analogize the rib pattern which has the small thermal deformation under thermal boundary condition. In the analysis of column rib structure, thermal boundary condition is separated to heat conduction and heat transfer to appropriate real boundary condition. Finally, performance chart of bed and column rib structure is provided for designer to estimate each rib pattern and select rib structure appropriating to thermal condition.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.170-177
• /
• 2007

The objectives of this study were to select early, late, and abundant flowering trees of black locust from domesticated and introduced cultivars, and prediction of flowering period by calculation of accumulated temperature in spring. Four cultivars (Debreceni-2, Pusztavacs, Jaszkiseri, and Rozsaszin AC) from Hungary and a cultivar from Beijing, China, were introduced, propagated by seed and planted in a seed orchard. For domesticated black locust, 63 cultivars from 10 locations throughout the country were selected and propagated by root cutting. Criteria for selection of domesticated cultivars were abundant flowering, long flowering period, or abundant nectar production with, if possible, straight stems. Accumulated temperature was calculated from data of a nearby weather station by accumulating daily maximum temperature minus 5 degree Celsius from January 1 up to the date reaching 880 degrees. Daily mean temperature was also used to calculate accumulated temperature up to the date reaching 450 degrees. The percentages of two-year and three-year-old flowering trees propagated by root cutting were higher than that of trees propagated by seeds, while four-year-old trees all flowered regardless of propagation methods. Among the domesticated cultivars, all the cultivars from Ganghwa showed abundant flowering with highest nectar production of 6.5 ul per flower, which was 100% more than other domesticated cultivars and 50% more than Debreceni-2 cultivar with highest nectar production among the introduced cultivars from Hungary. At the end of the eight years of observations, two trees of Debreceni-2 cultivars and a tree from Beijing, China were selected for early flowering trees which flowered 2 to 3 days earlier than average trees, while a tree of Debeceni-2 and three trees from Bejing were selected for late flowering trees which flowered 2 to 3 days later than average trees. It is possible to extend the flowering period of black locust by 4 to 6 days by planting early and late flowering cultivars together. Abundant flowering trees were unable to be selected due to severe damages by leaf gall midges which killed many trees and reduced the crown size of the remaining trees in the seed orchard, and which were first found in Korea in 2001 and now damaging most of the black locust forests in Korea. The prediction of flowering period by accumulated temperature indicated that black locust flowered to a peak when accumulated daily maximum temperature reached 880 degrees Celsius, and when daily mean temperature reached 450 degrees.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.237-251
• /
• 2013

본 연구는 변형률게이지와 열전대, 적외선 열화상카메라를 사용하여 선형절삭실험 동안 디스크커터의 축에 발생하는 축응력과 토크를 측정하고 디스크커터의 내부와 외부의 온도를 파악하고자 하였다. 실험결과, 축응력과 토크의 최대값은 각각 11.3 MPa, $171kN{\cdot}m$로 측정되었으며, 축응력과 토크는 회전력보다는 디스크커터의 연직력과 상관성이 높은 것으로 나타났다. 선형절삭실험 동안 열전대로 측정한 결과, 디스크커터의 온도변화는 $0.2^{\circ}C$ 이내로 나타났다. 그러나 수행된 각 선형절삭작업이 연속적으로 이루어진다고 가정한 다음, 디스크커터의 내부온도와 커터 링 표면의 온도변화를 추정한 결과, 커터간격이 70 mm인 경우에는 각각 $0.1^{\circ}C/m$, $0.15{\sim}0.17^{\circ}C/m$로 예상되었고 커터간격이 90 mm인 경우에는 각각 $0.09^{\circ}C/m$, $0.13{\sim}0.23^{\circ}C/m$로 추정되었다.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.412-420
• /
• 2004

The purpose of the present study is to determine an optimum composition using cheaper powders keeping with high performance of hard rock cutting diamond saw blade. With 50Fe-20(Cu . Sn)-30Co specimen, a part of Co was replaced by Ni(5%, 10%, and 15%, respectively). These specimens were hot pressed and sintered for predetermined time at various temperature. Sintering is performed by two different methods of temperature controlled method and specimen dimension controlled method. In order to determine the property of the sintered diamond saw blade, 3 point bending tester, X-ray diffractometer, and SEM were used. As the Co in the bond alloy was replaced by Ni, the hardness of the specimen increased. Thus the 50Fe-20(CuㆍSn)-15Co-15Ni specimen showed the maximum hardness of 104(HRB). The results of 3 point bending test showed that flexure strength decreased along with increase in Ni content. This is attributed to the formation of intermetallic compound(Ni$_{x}$Sn) determined by X-ray diffraction. The fracture surface after 3 point bending test showed that diamond was fractured in the specimen containing 0%, 5%, and 10%Ni, and the fracture occurred at the interface between diamond and matrix in the specimen containing 15%Ni. The cutting ability test showed that the abrasive property was not changed in the specimen containing 0%, 5%, and 10%Ni. The optimum composition determined in this study is 50Fe-20(CuㆍSn)-20Co-10Ni.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.403-408
• /
• 2003

The erosion behavior of :artificially aged HK40 steel was investigated. Erosion tests were conducted at room temperature, $200^{\circ}C$ and $400^{\circ}C$ using $Al_2O_3$ particles. Erosion rates increased with increment of temperature. The maximum erosion rate increased with the impingement angle of 30 degree. The erosion rate increased, reached the maximum at 1000 hours, and after that, decreased with heat treatment time. The mechanism of erosion seems to be the cutting wear which is very much associated with the strength of material. As results, the erosion rates were rather affected by the tensile strength and the strain hardening coefficient than the hardness and the yield strength. Such changes of material properties would be caused by the change of micro-structure due to the precipitation of carbide and the dissolution of solid element within matrix during the heat treatment.