• Title/Summary/Keyword: Maxillofacial prosthodontics

Search Result 295, Processing Time 0.03 seconds

Prosthodontic rehabilitation of a patient with bilateral auricular deformity

  • Mantri, Sneha Shivkumar;Thombre, Ram U.;Pallavi, Daigavane
    • The Journal of Advanced Prosthodontics
    • /
    • v.3 no.2
    • /
    • pp.101-105
    • /
    • 2011
  • Maxillofacial prosthodontics is an art and science which provides life like appearance to the person with facial deformity. Maxillofacial prosthetic rehabilitation for acquired defects has become more complex and sophisticated with advancement in techniques and materials. This case report describes the clinical and laboratory procedure for fabricating an auricular prosthesis for a patient with trauma related bilateral auricular deformity. Ear prosthesis was fabricated in two parts taking retention from external auditory canal.

Analysis of maxillofacial prosthetics at university dental hospitals in the capital region of Korea

  • Kim, Jee-Hwan;Shin, Soo-Yeon;Paek, Janghyun;Lee, Jong-Ho;Kwon, Ho-Beom
    • The Journal of Advanced Prosthodontics
    • /
    • v.8 no.3
    • /
    • pp.229-234
    • /
    • 2016
  • PURPOSE. The purpose of this study was to investigate the demographic patterns of maxillofacial prosthetic treatment to identify the characteristics and geographic distribution of patients with maxillofacial prosthetics in the capital region of Korea. MATERIALS AND METHODS. This retrospective analytical multicenter study was performed by chart reviews. This study included patients who visited the department of prosthodontics at four university dental hospitals for maxillofacial prosthetic rehabilitation. Patients with facial and congenital defects or with insufficient medical data were excluded. The patients were classified into three categories based on the location of the defect. Patients' sex, age, and residential area were analyzed. Pearson's chi-square test with a significance level of 0.05 was used to analyze the variables. RESULTS. Among 540 patients with maxillofacial prosthetics, there were 284 (52.59%) male patients and 256 (47.41%) female patients. The number of the patients varied greatly by hospital. Most patients were older than 70, and the most common defect was a hard palate defect. Chi-square analysis did not identify any significant differences in sex, age, and distance to hospital for any defect group (P>.05). CONCLUSION. The results of this study indicated that there was imbalance in the distribution of patients with maxillofacial prosthetic among the hospitals in the capital region of Korea. Considerations on specialists and insurance policies for the improvement of maxillofacial prosthetics in Korea are required.

Subtractive versus additive indirect manufacturing techniques of digitally designed partial dentures

  • Snosi, Ahmed Mamdouh;Lotfy, Shaimaa Mohamed;Thabet, Yasmine Galaleldin;Sabet, Marwa Ezzat;Rizk, Fardos Nabil
    • The Journal of Advanced Prosthodontics
    • /
    • v.13 no.5
    • /
    • pp.327-332
    • /
    • 2021
  • PURPOSE. The purpose of this in vitro study was to evaluate the accuracy of digitally designed removable partial denture (RPD) frameworks, constructed by additive and subtractive methods castable resin patterns, using comparative 3D analysis. MATERIALS AND METHODS. A Kennedy class III mod. 1 educational maxillary model was used in this study. The cast was scanned after modification, and a removable partial denture framework was digitally designed. Twelve frameworks were constructed. Two groups were defined: Group A: six frameworks were milled with castable resin, then casted by the lost wax technique into Co-Cr frameworks; Group B: six frameworks were printed with castable resin, then casted by the lost wax technique into Co-Cr frameworks. Comparative 3D analysis was used to measure the accuracy of the fabricated frameworks using Geomagic Control X software. Student's t-test was used for comparing data. P value ≤ .05 was considered statistically significant. RESULTS. Regarding the accuracy of the occlusal rests, group A (milled) (0.1417 ± 0.0224) showed significantly higher accuracy than group B (printed) (0.02347 ± 0.0221). The same results were found regarding the 3D comparison of the overall accuracy, in which group A (0.1501 ± 0.0205) was significantly more accurate than group B (0.179 ± 0.0137). CONCLUSION. In indirect fabrication techniques, subtractive manufacturing yields more accurate RPDs than additive manufacturing.

THE SURVEY ON ORAL HEALTH AND MAXILLOFACIAL TRAUMA INCIDENCE OF THE SPORTS PLAYERS IN KOREA (운동선수들의 구강 악 안면 영역에서의 스포츠 외상에 관한 설문조사)

  • Park, Neung-Seog;Woo, Yi-Hyung;Bak, Jin;Choi, Dae-Gyun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.45 no.4
    • /
    • pp.534-545
    • /
    • 2007
  • Statement of problem: In spite of increasing sports injury, there was no collected data on the rate and type of dental injuries for athletes in Korea. Purpose: The purpose of this study was to investigate the occurrence of maxillofacial injuries and attitude of college sports player in Korea towards mouthguard. Material and methods: Total 617 athletes answered a series of questionnaire concerning their sports injury and using mouthguard. Results: 1. 81%(502) of athletes had, playing or training a sports, suffered an injury. Female athletes suffered an injury more than male athletes(p<0.05). Contact sports athletes were injured more than non contact sports athletes(p<0.05). 2. 335 athletes(54.8%) had suffered maxillofacial injuries while playing or training. 81.8% of athletes suffered an maxillofacial injury in contact sports(p<0.05). 3. Laceration of oral area, wrick in neck, fracture or avulsion on upper incisors, concussion, TMJ injury, fracture or avulsion on lower incisors, fracture or avulsion on lower molars were frequently injured area. 4. 67.2% of athletes answered that mouthguard could prevent sports injury especially high in contact sports(p<0.05). But only 39.1% of athletes required mouthguard while playing. 44.6% of athletes showed their intention of using mouthguard. Conclusion: This study shows that the incidence of maxillofacial injuries is very high while the actual use of mouthguard is very low. To prevent sports injury, a dentist must inform sports players and coaches of accurate information about mouthguard so that they can use it well. A dentist also has to provide them with better mouthguard on the basis of user's complaint.

Horizontal Ridge Augmentation with Piezoelectric Hinge-Assisted Ridge Split Technique in the Atrophic Posterior Mandible

  • Cha, Min-Sang;Lee, Ji-Hye;Lee, Sang-Woon;Cho, Lee-Ra;Huh, Yoon-Hyuk;Lee, You-Sun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.36 no.3
    • /
    • pp.124-130
    • /
    • 2014
  • Onlay bone grafting, guided bone regeneration, and alveolar ridge split technique are considered reliable bone augmentation methods on the horizontally atrophic alveolar ridge. Among these techniques, alveolar ridge split procedures are technique-sensitive and difficult to perform in the posterior mandible. This case report describes successful implant placement with the use of piezoelectric hinge-assisted ridge split technique in an atrophic posterior mandible.

Non-invasive different modalities of treatment for temporomandibular disorders: review of literature

  • Abouelhuda, Amira Mokhtar;khalifa, Ahmad Khalifa;Kim, Young-Kyun;Hegazy, Salah Abdelftah
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.44 no.2
    • /
    • pp.43-51
    • /
    • 2018
  • Temporomandibular disorders (TMDs) are diseases that affect the temporomandibular joint and supporting structures. The goal of treatment for TMDs is elimination or reduction of pain and return to normal temporomandibular joint function. Initial treatment for TMDs is non-invasive and conservative, not surgical. Oral and maxillofacial surgeons should fully understand and actively care about non-invasive treatments for TMDs. The purpose of this study is to review the validity and outcomes of non-invasive and surgical treatment modalities for TMDs.

Questions about "No evidence on the effectiveness of oral splints for the management of temporomandibular joint dysfunction pain in both short and long-term follow-up systematic reviews and meta-analysis studies"

  • Costa, Matheus Souza Campos;Costa, Sandy Maria da Silva;de Freitas, Nicole Rosa;Guerrini, Luisa Belluco;Ferraz, Caio Sousa;de Almeida, Ana Lucia Pompeia Fraga
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.46 no.5
    • /
    • pp.367-368
    • /
    • 2020

Incidence of Oral and Maxillofacial Injuries of a Elementary School Children in Suwon City (수원지역 초등학교 학생의 구강악안면 외상에 관한 실태 조사)

  • Jung, Young-Chan;Oh, Sang-Chun;Lee, Sang-Kwon;Dong, Jin-Keun
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.16 no.3
    • /
    • pp.229-236
    • /
    • 2000
  • The purpose of this study was to analyze the prevalence of Oral and maxillofacial injuries of elementary school children in Suwon, Korea. The sample consisted of 850 boys and girls in a elementary school children in the city. This study conducted a survey by sending questionnaires to school-aged boys and girls, to study a condition of traumatic injuries of teeth. 1. The students who had a traumatic injuries in a oral & maxillofacial area are 125 persons(14.7%); boys 93 persons(21%), girls 32 persons (7.9%). 2. Incidence of traumatic injuries was 1 time 102 persons(81.6%), 2 times 14 persons(11.2%), others 9 persons(7.2%). 3. The causes of traumatic injuries were fall down 65.6%, blow 10.4%, sports 9.6%, traffic accidents 7.2%, tripping 3.2%, others 4%. 4. The distributions of sports related traumatic injuries were roller blade 7 persons, bicycle 2 persons, football 1 person, baseball 1 person, basketball 1 person. 5. Types of traumatic injuries were soft tissue injury(40.8%), tooth fracture(36.8%), extrusion(8.0%), jaw fracture(3.2%), others(11.2%).

  • PDF

Advancements in craniofacial prosthesis fabrication: A narrative review of holistic treatment

  • Jazayeri, Hossein E.;Kang, Steve;Masri, Radi M.;Kuhn, Lauren;Fahimipour, Farahnaz;Vanevenhoven, Rabecca;Thompson, Geoffrey;Gheisarifar, Maryam;Tahriri, Mohammadreza;Tayebi, Lobat
    • The Journal of Advanced Prosthodontics
    • /
    • v.10 no.6
    • /
    • pp.430-439
    • /
    • 2018
  • The treatment of craniofacial anomalies has been challenging as a result of technological shortcomings that could not provide a consistent protocol to perfectly restore patient-specific anatomy. In the past, wax-up and impression-based maneuvers were implemented to achieve this clinical end. However, with the advent of computer-aided design and computer-aided manufacturing (CAD/CAM) technology, a rapid and cost-effective workflow in prosthetic rehabilitation has taken the place of the outdated procedures. Because the use of implants is so profound in different facets of restorative dentistry, their placement for craniofacial prosthesis retention has also been widely popular and advantageous in a variety of clinical settings. This review aims to effectively describe the well-rounded and interdisciplinary practice of craniofacial prosthesis fabrication and retention by outlining fabrication, osseointegrated implant placement for prosthesis retention, a myriad of clinical examples in the craniofacial complex, and a glimpse of the future of bioengineering principles to restore bioactivity and physiology to the previously defected tissue.