• 치과방사선
• /
• 제29권2호
• /
• pp.493-505
• /
• 1999

Purpose: This study was to evaluate the effects of Aloe. Gelfoam. and Plaster of Paris on bone healing. Materials and Methods: Four experimental defects were created for placement of the three materials in the right femur of dogs. One defect served as an empty control site. The evaluation was performed at 1-. 6-. and 12-weeks by light microscopy and radiographs. Results: Radiographic and histologic examinations showed new bone formation in the presence of Aloe, Gelfoam. and Plaster of Paris and similar bone healing reactions. Conclusion: On the basis of these findings, it was concluded that Aloe, Gelfoam. and Plaster of Paris may be adequate agents for use in bone procurement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권6호
• /
• pp.428-434
• /
• 2020

Orbital floor blowout fractures can result in a variety of signs and symptoms depending on the severity of the bone defect. Large defects often result in enophthalmos and restriction of ocular movement; yet the timing of surgery can be delayed up to two weeks with good functional outcomes. In contrast, an orbital trapdoor defect with entrapment of the inferior rectus muscle usually elicits pain with marked restriction of the upward gaze and activation of the oculocardiac reflex without significant dystopia or enophthalmos. When autonomic cardiac derangement is diagnosed along with an orbital floor fracture, it has been suggested that the fracture should be treated immediately. Otherwise, it will result in continued hemodynamic instability and muscular injury and may require a second surgery. This article reports the management of an unusual presentation of a trapdoor blowout orbital floor fracture surgery with oculocardiac response in an adult, with emphasis on its pathophysiology, management, and differential diagnosis.

• Imaging Science in Dentistry
• /
• 제52권2호
• /
• pp.165-170
• /
• 2022

Purpose: This report presents a case of an unusual and rare presentation of Stafne bone defect (SBD) with apical resorption extending from the lower right lateral incisor to the right first premolar. A systematic search of the current literature on cases where SBD affected the adjacent teeth was conducted. Materials and Methods: From 259 identified articles, 114 studies were examined, containing 12 individuals with a mean age of 41.58 years. Ten cases in the anterior mandible and 2 in the posterior mandible were found. Results: The results of SBD varied from apical blunting to severe root resorption, and some cases showed close apical contact with the lesion or involvement of the root without any effect. Conclusion: SBD is an unusual incidental finding in the anterior region of the mandible, and unexpected behavior of the lesion, such as root resorption, must be considered.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권4호
• /
• pp.746-757
• /
• 1996

Bony defects may be found as a result of congenital anomalies, traumatic injury, automobile collisions and industrial accidents in the maxillofacial area. Such conditions are often associated with severs functional and esthetic problem. Various surgical procedure has been utilized in attempts to repair and reconstruct bony defects. Bone is a complex, living, constantly changing tissue. The architecture and composition of cancellous and cortical bone allow the skeleton to perform its essential mechanical functions. Periosteum covers the external surface of bone and consists of two layers : an outer fibrous layer and an inner more cellular and vascular layer. The inner osteogenic layer or cambium layer can form new bone while the outer layer firms part of the insertions of tendons, ligaments and muscles. This study was under taken to evaluate bone healing process on partial defect of calvarial bone with or without periosteum in rat. We made calvarial defects of different size(4mm, 6mm, 8mm) with periosteum or without periosteum in rat to study the effect of defect size on healing process. Control and experimental groups sacrified at 1, 2, 4, 6, 8 weeks, postoperatively. We examed the specimens by gloss findings, light microscophy, and fluorescent microscophy. The results were as follows. 1. Gloss findings: Control groups are larger bony defects than experimental groups after 2 weeks, and than control groups advanced healing of defected bone but experimental groups are lesser after 4, 6 weeks. After 8 weeks, bone defect has not been identified in control and experimental groups. 2. Light microscope: All defects of control groups are larger bony defects than experimental groups after 2 weeks. And than control groups show smaller defect after 4 weeks. After 8 weeks, the control group reveal pin-point sized, hardly identifiable defect space and the experimental group reveal small, but definite defect space. 3. Fluorescent microscope : Each week, new bone formation of control group is very similar to the experimental group. In this study, Osteogenesis of calvarial bone defects with periosteum or without periosteum was examined for 8 weeks in rats. The replaced periosteum had batter new bone formation than the removed periosteum.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권1호
• /
• pp.1-6
• /
• 1993

The maxillary squamous cell carcinoma is major part of maxillary malignant tumor. The treatment of maxillary malignancy tumor is the maxillectomy in combination with radiation therapy and chemorherapy. When tumor invasion is occured to the orbit, orbital exenteration is required. But if the periosteum of the orbital floor is intact, the orbit can be preserved. There are many orbital floor reconstruction materials for the prevention of ptosis of the orbital content. The patients on this paper were diagnosised as squamous cell carcinoma on maxilla, we performed the partial maxillectomy including the orbital floor, and we used temporalis muscle-coronoid process flap for the reconstruction of the orbital floor after partial maxillectomy and obtained good esthetic and functional results, as followed. 1. We obtained sufficient flap width for defect of orbital floor. 2. It permits good blood supply and no necessary other donor site. 3. It gives a solid base for the support the globe and the orbital floor. 4. It gives minimal postoperative morphorogical defect and functional disturbance.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권3호
• /
• pp.63-67
• /
• 1990

Electrical burns of the lips are most frequently seen in small children, who are apt to chew on electrical cord or plug, the ends of extension cords in their mouth, saliva creates a short circuit across the terminals within the plug, causing an electrical burn. Tissue destruction with electrical burns is sudden and extensive. Extensive, deep coagulation necrosis is instaneously produced by the extreme temparatures of electrical arc. If the child is well grounded, the circuit flow through his body may cause cardiac arrest. The purpose of this report is to document two cases of electrical lip burn and reconstruction of the lip defect with some local flap techniques. For case 1, Z plasty & V-Y plasty and lengthening of the commissure and in case 2, Abbe flap technique was used and scar was revised later. Z-plasty and V-Y plastry were used for scar release and Abbe flap was designed on lower lip to meet the need of upper lip. For short of right lip width, lengthening of the commissure was done. We are to report the improvement with forementioned operation on the patient of electrical burn upon the lip.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.37.1-37.4
• /
• 2015

Keratocystic odontogenic tumors can occur in any area of the maxilla or mandible. According to their size, location, and relations with surrounding structures, they are treated by cyst enucleation or enucleation after either marsupialization or decompression. Enucleation is performed when cysts are not large and when only minor damage to adjacent anatomical structures is expected. Although marsupialization and decompression follow the same basic bone-regeneration principle, which is to say, by reducing the pressure within the cyst, the former leaves a large defect after healing due to the large fistula necessary to induce the conversion of the cyst-lining epithelia to oral epithelia; the latter leaves only a relatively small defect, because of the continuous washing carried out by means of a tube inserted into a small hole in the cyst. In the latter case too, a decompressor appropriate for the focal position is required, owing to the importance of maintaining the device and controlling for oral hygiene. We report herein decompression treatment with a patient-customized device for an extensive cyst in the anterior region of the mandible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.2.1-2.7
• /
• 2018

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권1호
• /
• pp.64-68
• /
• 2002

저자등은 치조열이 있는 성인 환자의 골결손에서 회복이 어려운 비익기저부의 지지와 구개비강누공(oronasal fistula)의 폐쇄등을 위하여, 형성된 defect 부위의 비강쪽 점막을 이용하여 nasal layer 형성하고 장골의 피질골과 해면골을 채취하여 파열된 piriform aperture 좌,우측 골에 fissure bur를 이용하여 양쪽에 수평홈을 형성하고, 채취한 피질골을 양측 홈사이에 설합과 같이 밀어 넣어 piriform aperture를 재건하여 연결시키고, 그 아래로 해면골을 이식된 피질골에 누르며 다져 충전하는 방법을 사용하여 비익기저부의 회복에 양호한 결과를 얻었기에 문헌고찰과 함께 증례들을 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권2호
• /
• pp.144-152
• /
• 1991

외상이나 종양의 적출 등으로 인하여 악안면부에 발생된 결손이나 안면 경부 기형의 교정을 위하여 여러 근피판을 이용하여 악안면부 재건술이 시행되어지고 있다. 흉쇄유돌근은 안면부의 일차적 혹은 이차적 재건에 안전하고 유용한 근피판 또는 근피부피판으로 널리 사용되고 있다. 이하선부에 발생된 종양의 적출술 후 나타날 수 있는 이하선부의 안모 변형 방지를 위하여 흉쇄유돌근 근피판을 이용하여 안모 재건이나 술후 가상형성으로 발생 가능한 적출부의 감염, 반흔조직 형성과 술후 천충으로 노출되는 안면신경을 보호하는데 사용할 수 있다. 전 흉쇄유돌근 근피판이나 다른 경부 근피판 사용시 이하선부의 과잉돌출, 안면경부 기형 및 경부운동 제한 등의 부작용이 발생될 수 있다. 이러한 단점을 보완하고자 저자등은 부분 흉쇄유돌근 근피판을 형성하여 기능적 이하선 적출술 후 노근피판 전위를 통하여 이하선부 연조직 결손으로 인한 안모 변형이나 사강형성 예방 등을 만족할 만한 결과를 얻었기에 문헌고찰과 함께 보고하고자 한다.