• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.617-634
• /
• 1991

The retraction of anterior teeth is one of the fundamental methods in orthodontic treatment and a proper position and angulation of anterior teeth after the retraction are very important for esthetics, stability, and function of teeth. In this research we analyzed, by Finite Element Method, the stress distribution on the periodontal ligament according to the variation of force and moment applied on the crown and predict the pattern of movement of maxillary central incisor. At the same time, the amount of force and moment caused by activation of the loop which was used for retraction of maxillary central incisor was analyzed by Finite Element Method. We observed the following results: 1) We could control the stress distribution on the periodontal ligament by proper moment/force ratio on maxillary right central incisor and predict the pattern of movement of maxillary right central incisor. 2) The amount of stress on the periodontal ligament as well as the moment/force ratio demanded by each pattern of movement increased as the destruction of alveolar bone was worse. 3) The moment/force ratio demanded by each pattern of movement decreased as the angle between the maxillary central incisor and occlusal plane decreased. 4) The force with the open loop was shown to be large compared to that with the closed loop. Also, the force with the helix decreased by 30% compared to that without the helix. 5) Under the same conditions we observed a larger moment/force ratio when the open loop and/or the helix were used.

• 대한치과교정학회지
• /
• 제48권4호
• /
• pp.224-235
• /
• 2018

Objective: The purpose of this study was to compare the skeletal, dental, and soft-tissue treatment effects of nonextraction therapy using the modified C-palatal plate (MCPP) to those of premolar extraction (PE) treatment in adult patients with Class II malocclusion. Methods: Pretreatment and posttreatment lateral cephalographs of 40 adult patients with Class II malocclusion were retrospectively analyzed. The MCPP group comprised 20 patients treated with total arch distalization of the maxillary arch while the PE group comprised 20 patients treated with four PE. Fifty-eight linear and angular measurements were analyzed to assess the changes before and after treatment. Descriptive statistics, paired t-test, and multivariate analysis of variance were performed to evaluate the treatment effects within and between the two groups. Results: The MCPP group presented 3.4 mm of retraction, 1.0 mm of extrusion, and $7.3^{\circ}$ lingual inclination of the maxillary central incisor. In comparison, the PE group displayed greater amount of maxillary central incisor retraction and retroclination, mandibular incisor retraction, and upper lip retraction (5.3 mm, $14.8^{\circ}$, 5.1 mm, and 2.0 mm, respectively; p < 0.001 for all). In addition, the MCPP group showed 4.0 mm of distalization and 1.3 mm of intrusion with $2.9^{\circ}$ distal tipping of the maxillary first molars. Conclusions: These findings suggest the MCPP is an effective distalization appliance in the maxillary arch. The amount of incisor retraction, however, was significantly higher in the PE group. Therefore, four PE may be recommended when greater improvement of incisor position and soft-tissue profile is required.

• 대한치과교정학회지
• /
• 제46권4호
• /
• pp.242-252
• /
• 2016

Objective: Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods: Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results: In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions: This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion.

• 대한치과교정학회지
• /
• 제34권6호
• /
• pp.544-554
• /
• 2004

진단용 셋업 모형 제작시 전치의 치축을 조절하기 위하여 incisor inclination indicator란 장치가 소개되었다. 이것은 상하악 전치의 후방 견인시 토오크 조절을 위하여 사용된다. 본 논문에서는 incisor inclination indicator를 사용하여 전치부 설측 브라켓에 적절한 토오크를 처방하는 방법을 묘사하고 이렇게 적절한 토오크가 처방된 전치부 설측 브라켓으로 치료한 양악 전돌증 환자의 치료결과를 평가한다. 후방 견인시 상하악 전치는 토오크가 적절하게 조절되었다. 설측교정치료에 있어서 incisor inclination indicator는 기공 과정에서 부가적으로 사용되어 전치부의 후방 견인시 효과적으로 토오크 조절을 할 수 있는 것으로 생각된다.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.103-113
• /
• 1984

This work was undertaken to evaluate the integumental response in lower face to hard tissue changes, and to grope the prediction equation for expected integumental profile changes. Cephalometric headplates of 25 persons consisted of 8 Angle's class 1 maxillary protrusive and 17 Angle's class II division 1 patients whose mean age was 15.2 years were traced, diagramatized, and statistically analyzed. The results were as follows; 1. Upper incisor and lips were retracted and convexity of integumental profile decreased concurrently with decrease of hard tissue procumbency, however soft tissue point A', B', and Pog' did not undergo significant changes after orthodontic treatment. 2. Remarkable increment of upper lip thickness and upper lip height was shown and this was related to upper incisor retraction. The ratio between the amount of upper incisor retraction and the increment o f upper lip thickness was approximately 1.16:1. 3. Moderate correlation of upper lip retraction to upper incisor retraction, and of lower lip retraction to lower incisor movement were arranged, and yet comparatively wide variability from subject to subject was shown. 4. It was possible to predict statistically for horizontal alteration of lip position and change of upper lip angulation ground in orthodontic treatment.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.547-554
• /
• 1994

This study was carried out in order to find out the soft tissue profile changes associated with maxillary incisor retraction in Angle's class I malocclusion patients. For this study fifty two female adult patients (Maximum Retraction Group 23, Minimum Retraction Group 29) who received orthodontic treatment were chosen. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. When considering the mean changes of soft tissue and hard tissue, UP, LIP, Ls, Li (p<0.001), Point B, Si (p<0.01), Point A, Ss (p<0.05) were significant posterior movement in Maximum Retraction Group and UIP (p<0.001), LIP, Ls, Li (p<0.01), Point B, Si (p<0.05) were significant posterior movement in Minimum Retraction Group. 2. When considering the correlations between hard tissue and soft tissue changes, greater correlations were found in Minimum Retraction Group between UIP and Ls (p<0.01), Point A and Ss, UIP and Li, Point B and Si (p<0.05) than Minimum Retraction Group. 3. Correlations (p<0.01) were found between upper incisor retraction and posterior movement of the upper and lower lip in Thin Lip-Thickness Group, whereas no significant correlations were found in Thick Lip-Thickness Group. 4. Mean changes of the soft tissue thickness subsequent to incisor retraction were increased (p<0.01) in upper lip (Ls-Ls'), whereas no changes were found in lower lip.

• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.258-267
• /
• 2022

Objective: This study aimed to evaluate the superimposition accuracy of digital modes for measuring tooth movement in patients requiring anterior retraction after premolar extraction based on the proposed reference regions. Methods: Forty patients treated with bilateral maxillary first premolar extraction were divided into two groups: moderate retraction (< 7.0 mm) and maximum retraction (≥ 7.0 mm). Central incisor displacement was measured using cephalometric superimpositions and three-dimensional (3D) digital superimpositions with the 3rd or 4th ruga as the reference point. The Wilcoxon signed-rank test and linear regression analyses were performed to test the significance of the differences and relationships between the two measurement techniques. Results: In the moderate retraction group, the central incisor anteroposterior displacement values did not differ significantly between 3D digital and cephalometric superimpositions. However, in the maximum-retraction group, significant differences were observed between the anteroposterior displacement evaluated by the 3rd ruga superimposition and cephalometric methods (p < 0.05). Conclusions: This study demonstrated that 3D digital superimpositions were clinically as reliable as cephalometric superimpositions in assessing tooth movements in patients requiring moderate retraction. However, the reference point should be carefully examined in patients who require maximum retraction.

• 대한치과교정학회지
• /
• 제36권1호
• /
• pp.30-44
• /
• 2006

교정치료 영역에서 성인들의 심미적인 요구도가 증가되면서 설측 교정치료는 여러 가지 단점에도 불구하고, 가장 심미적이라는 이유로 많은 주목을 받아왔지만 실제 치아이동을 결정지을 수 있는 브라켓을 부착하는 기준평면의 위치에 대해서는 거의 보고된 바가 없다. 이에 본 연구는 실제 브라켓이 부착되는 평면의 상하 평행이동이나 기울기 변화에 따라 치아이동 양상이 어떻게 변화되는지 알아보고, 바람직한 전치부 치체이동을 얻기 위해서 힘의 적용점을 어디에 두어야 하는지, 그리고 전치부에 어느 정도의 모멘트를 부여해야 하는지 알아보고자 3차원 유한요소법을 이용하여 치아 변위 및 응력분포를 비교 분석하였다. 실험 결과 설측 브라켓 부착평면을 치은연쪽으로 평행이동 혹은 회전이동 시키고 견인하였을 경우, 절단연쪽으로 이동시켰을 때와 비교했을 때 비조절성 설측 경사이동이 감소하기는 하였으나 상하악 전치부 치아들의 설측경사 양상은 지속되었으며, 이러한 양상은 견치 브라켓의 hook 길이를 증가시켜도 계속 나타났다. 이와는 달리 설측 중심평면에 브라켓을 부착하고 각 치아별로 모멘트를 부여하였을 경우 설측 방향으로 개개 치아들의 치체이동이 발생하여 설측 교정치료 시 효과적인 전치부 치아의 후방견인이 가능함을 알 수 있었다.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.158-166
• /
• 2017

Objective: To investigate how bracket slot size affects the direction of maxillary anterior tooth movement when en-masse retraction is performed in sliding mechanics using an induction-heating typodont simulation system. Methods: An induction-heating typodont simulation system was designed based on the Calorific Machine system. The typodont included metal anterior and resin posterior teeth embedded in a sticky wax arch. Three bracket slot groups (0.018, 0.020, and 0.022 inch [in]) were tested. A retraction force of 250 g was applied in the posterior-superior direction. Results: In the anteroposterior direction, the cusp tip of the canine in the 0.020-in slot group moved more distally than in the 0.018-in slot group. In the vertical direction, all six anterior teeth were intruded in the 0.018-in slot group and extruded in the 0.020- and 0.022-in slot groups. The lateral incisor was significantly extruded in the 0.020- and 0.022-in slot groups. Significant differences in the crown linguoversion were found between the 0.018- and 0.020-in slot groups and 0.018- and 0.022-in slot groups for the central incisor and between the 0.018- and 0.022-in slot groups and 0.020- and 0.022-in slot groups for the canine. In the 0.018-in slot group, all anterior teeth showed crown mesial angulation. Significant differences were found between the 0.018- and 0.022-in slot groups for the lateral incisor and between the 0.018- and 0.020-in slot groups and 0.018- and 0.022-in slot groups for the canine. Conclusions: Use of 0.018-in slot brackets was effective for preventing extrusion and crown linguoversion of anterior teeth in sliding mechanics.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.361-370
• /
• 2011

Objective: Speedy surgical orthodontics (SSO), an innovative orthodontic treatment, involves the application of orthopedic forces against temporary skeletal anchorage devices following perisegmental corticotomy to induce movement of specific dental segments. Herein, we report the biological effects of SSO on the teeth and periodontal structures. Methods: Five beagle dogs were divided into 2 groups and their 6 maxillary incisors were retracted $en$ $masse$ by applying 500 g orthopedic force against a single palatal mini-plate. Retraction was performed without and with perisegmental corticotomy in groups I and II, respectively. All animals were killed on the 70th day, and their periodontal structures were processed for histologic analyses and scanning electronic microscopy (SEM). The linear distance between the third maxillary incisor and canine was used as a benchmark to quantify the retraction amount. Results: Retraction was markedly faster and retraction amount greater in group II than in Group I. Surprisingly, Group II did not show any root resorption despite extensive retraction, while Group I showed prominent root surface irregularities. Similarly, SEM showed multiple resorption lacunae in Group I, but not in Group II. Conclusions: SSO is an effective and favorable orthodontic approach for major en masse retraction of the maxillary anterior teeth.