• 대한소아치과학회지
• /
• 제41권1호
• /
• pp.64-71
• /
• 2014

과잉치는 정상치아의 수보다 증가되어 나타나는 치아로서 상악 중절치 사이의 과잉치를 정중과잉치라 부른다. 정중과잉치는 상악 전치의 맹출 장애를 포함하는 여러가지 병발증을 야기하지만 그 제거시기에 대해서는 아직 논란이 있다. 정중과잉치에 의해 발생하는 병발증을 피하기 위해 가능한 조기에 발견하여 제거해야 한다는 주장과 외과적 발거에 따른 인접 치아의 손상을 최소화하기위해 상악 영구 전치의 치근발육이 완성된 후 제거해야한다는 주장이 있다. 이에 저자는 정중과잉치로 인해 회전된 상악 중절치를 가진 세 명의 환자들에서 중절치가 치근발육 초기단계에 있을 때 정중과잉치를 제거함으로써 회전된 상악 영구중절치의 자연적인 개선이 보이는 바 이를 보고하고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.161-169
• /
• 2019

Objective: To evaluate the effectiveness of the Frog appliance in three dimensions by using cone-beam computed tomography (CBCT) images. Methods: Forty patients (21 boys and 19 girls), averaged 11.7 years old, with an Angle Class II division 1 malocclusion were included in our study. They had either late mixed dentition or early permanent dentition, and the maxillary second molars had not yet erupted. All patients underwent CBCT before and after the treatment for measuring changes in the maxillary first molars, second premolars, central incisors, and profile. Paired-samples t-test was used to compare the mean difference in each variable before treatment and after the first phase of treatment. Results: The maxillary first molars were effectively distalized by 4.25 mm (p < 0.001) and 3.53 mm (p < 0.05) in the dental crown and root apex, respectively. The tipping increased by $2.25^{\circ}$, but the difference was not significant. Moreover the teeth moved buccally by 0.84 mm (p < 0.05) and 2.87 mm (p < 0.01) in the mesiobuccal and distobuccal cusps, respectively, whereas no significant changes occurred in the root apex. Regarding the anchorage parts, the angle of the maxillary central incisor's long axis to the sella-nasion plane increased by $2.76^{\circ}$ (p < 0.05) and the distance from the upper lip to the esthetic plane decreased by 0.52 mm (p = 0.01). Conclusions: The Frog appliance effectively distalized the maxillary molars with an acceptable degree of tipping, distobuccal rotation, and buccal crown torque, with only slight anchorage loss. Furthermore, CBCT image demonstrated that it is a simple and reliable method for three-dimensional analysis.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.85-93
• /
• 1983

In one group that tested for the effects of grinding and etching on the deciduous teeth, S.E.M. examination on the ground or unground labial surface of deciduous maxillary central incisors were made after etching procedure with 40% phosphoric acid for 60 secs., 120 secs., 180 sees. each. In another group that tested for the degree of resin penetration to the ground and etched deciduous teeth, composite resin application was done to the ground deciduous maxillary central incisors that had been acid-etched for 30 secs., 60 secs., 90 sees., 120 sees., 180 secs. each. The tooth-resin specimens were cut at the middle 1/3 of the crown by 2mm thickness, and the adjacent tooth materials were demineralized by 10% hydrochloric acid, the author observed the tags of the resin replica with S.E.M.. Following results were obtained. 1. After 40% phosphoric acid etching, the unground deciduous enamel surface showed various types of etching pattern. 2. For the formation of regular micropores on deciduous enamel surface by acid etching with 40% phosphoric acid, the time over 120 secs. should be requested. 3. After 40% phosphoric acid etching, the ground deciduous enamel surface showed the same etching pattern that has been a preferential removal of prism peripheries despite different etching time. 4. On the ground group that etched over 60 secs. to 180 secs., the length of tags was $5{\mu}m$ to $8{\mu}m$, with a mean of $7{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.39.1-39.12
• /
• 2022

Objectives: This study investigated the prevalence and characteristics of external cervical resorption (ECR) regarding sex, age, tooth, stages of progression, and portal of entry, using cone-beam computed tomography (CBCT) scans. Materials and Methods: CBCT scans of 1,313 patients from a Brazilian subpopulation comprising 883 female and 430 male patients (mean age, 55.2 years), acquired using a PreXion 3D CBCT unit, were evaluated. All permanent teeth included in the scans were evaluated for the presence of ECR according to the 3-dimensional classification and the portal of entry. The association between the presence of ECR and the factors studied was assessed using the χ² test. Intra-observer agreement was analyzed with the kappa test (α = 0.05). Results: In total, 6,240 teeth were analyzed, of which 84 (1.35%) were affected by ECR. A significant association was found between the presence of ECR and sex, with a higher prevalence in male patients (p = 0.002). The most frequently affected teeth were the mandibular and maxillary central incisors. The most common height was the mid-third of the root. For the portal of entry, 44% of cases were on the proximal surfaces, 40.5% on the lingual/palatal surface and 15.5% on the buccal surface. Intra-observer agreement was excellent. Conclusions: The prevalence of ECR was 1.35%, with a higher prevalence in male patients and a wide age distribution. The mandibular and maxillary central incisors were the most commonly affected teeth, and cases of ECR most frequently showed a height into the mid-third of the root and proximal entry.

• 대한소아치과학회지
• /
• 제36권3호
• /
• pp.387-393
• /
• 2009

본 연구는 상악 유전치부의 치간공간과 인접면 우식의 상관관계를 평가해보고자 하였다. 익산에 거주하는 만3-7세의 어린이 555명을 대상으로 하였으며 탐침이 통과하는지 여부로 치간공간이 있음과 없음으로 분류하였고 와동이 형성되었거나 법랑질 표면이 연화되었을 경우 인접면 우식이 존재하는 것으로 판단하였다. 연구 결과 다음과 같은 결론을 얻었다. 1. 상악 유전치부의 치간공간은 영장류 공간이 77.4%, 발육공간이 유측절치와 유중절치 사이에서 54.4%, 양유중절치 사이에서 39.0%로 나타났다. 2. 인접면 우식발생율은 우측유견치가 6.3%, 우측유측절치가 14.7%, 우측유중절치가 33.5%, 좌측유중절치가 33.7%, 좌측유측절치가 16.0%, 좌측유견치가 4.7%로 나타났다. 3. 치간공간의 수가 많을수록 상악 유전치의 우식발생율은 낮아졌으나 그 상관관계(r=-0.024)는 미약하였다. 4. 상악 유전치부에 공간이 존재하지 않을 경우 존재할 때 보다 평균 우식발생율이 높았으며, 치간공간이 전혀 존재하지 않는 경우 한 곳이라도 치간공간이 존재하는 경우보다 평균 우식발생율이 2배 이상 높은 것으로 나타났다.

• 대한소아치과학회지
• /
• 제45권1호
• /
• pp.1-9
• /
• 2018

본 연구의 목적은 다중 회귀 분석을 이용하여 상악 매복 중절치를 교정적 견인한 후 치료 결과에 영향을 미치는 요소를 확인하는 것이다. 2005년 1월부터 2015년 12월까지 연세대학교 치과대학병원 소아치과에서 상악 매복 중절치에 버튼 부착 수술을 동반한 교정적 치료를 받은 소아 청소년 환자 총 83명을 대상으로 환자 정보와 치료 전, 후 방사선학적 정보를 이용하여 연구를 진행하였다. 치료 후 인접한 중절치의 길이에 대한 견인한 중절치의 길이의 비율에 대해 성별, 연령 등 환자 정보의 영향 및 치아 발육 단계, 매복 치아의 높이와 위치, 각도 등 방사선학적 정보의 영향을 다중 회귀 분석을 통하여서 평가하였다. 다중 회귀 분석 결과, stem cell from apical papilla (SCAP)의 높이가 높아질수록 치료 후 치아길이비율은 0.345 단위 증가하였으나(p < 0.01), 성별, 치아 발육 단계, 매복치아와 중심선과의 거리 및 각도, 매복치아의 절단면의 높이는 치료 후 치아길이비율과 통계학적으로 유의미한 차이를 보이지 않았다(p > 0.05). 매복 중절치 교정적 견인 치료 시 견인한 치아의 길이는 초기 SCAP의 높이의 영향을 받으나, 성별, 치아 발육 단계, 중심선과의 각도, 절단면의 높이에 따른 영향은 보이지 않았다.

• 대한치과의사협회지
• /
• 제22권10호통권185호
• /
• pp.869-877
• /
• 1984

An objective examination of 123 subjects aged from 19 to 23 was made from a clinical standpoints to determine the natural occurrence in anterior tooth contact in centric occlusion, and tooth contact in protrusive occlusion, left and right lateral excursions, and temporomandibular dysfunction. 1. In centric occlusion, maxillary 6 anterior contact type was frequently observe (30.08%) compared with other types of contact (incisor contact: 19.47%, no contact: 17.70%, canine and incisor contact: 15.04%, canines contact: 12.39%, unilateral canine contact: 5.31%) (P<0.01) 2. In protrusive position (edge to edge bite), maxillary central incisors contact was predominant (86.7%). (P<0.01) 3. In lateral excursion, there was not any significant difference between canine guided occlusion (47.79%) and group function occlusion (total 51.32%, AG:9.29%, PG:13.27%, G:28.76%). 4. Temporomandibular joint dysfunction was observed in 12.4% of 123 subjects.

• 대한소아치과학회지
• /
• 제51권1호
• /
• pp.55-65
• /
• 2024

This study aimed to assess the accuracy of tooth widths, intermolar widths, and arch lengths acquired through two intraoral scanners, including iTero Element Plus Series (Align Technology, Santa Clara, CA, USA) and Trios 4 (3Shape, Copenhagen, Denmark), specifically on mixed dentition. A total of 30 subjects were divided into 2 groups, each undergoing both alginate impressions and intraoral scanning using either the iTero or Trios scanner. The plaster models were measured with a caliper, while the digital models were measured virtually. In the iTero group, all tooth width measurements exhibited differences compared to the plaster values, except for maxillary left lateral incisors (p = 0.179), mandibular right (p = 0.285), and left (p = 0.073) central incisors. The Trios group did not display significant differences in any of the tooth width measurements. Intermolar width comparisons for both groups indicated differences, except for mandibular primary canine to primary canine values (p = 0.426) in the iTero group. Regarding arch length, the mandibular anterior, maxillary right, and left arch lengths in the iTero group demonstrated larger caliper values than those of iTero. Conversely, in the Trios group, all parameters showed smaller caliper values, especially in upper anterior, maxillary right, mandibular right, and mandibular left arch lengths with significance (p = 0.027, 0.007, 0.003, and 0.047, respectively). Despite the differences between the two groups, digital models might be clinically suitable alternatives for plaster models. Pediatric dentists should carefully assess these differences, as a comprehensive evaluation would result in precise orthodontic treatment planning and favorable outcomes for young patients with mixed dentition.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.30.1-30.7
• /
• 2020

Background: Dental studies of precocious puberty have focused on examination of jaw and dentition growth. The aim of the study was to analyze the relationship between precocious puberty and maxillary dental developmental abnormalities (DDAs). Methods: This retrospective study was conducted on the Korean patients in whom dental panoramic and hand-wrist radiographs had been taken before they were 15 years of age. The maxillary DDAs were assessed as mesiodens, congenital missing teeth, peg-shape lateral incisors, or impacted teeth. The chronological ages of the control group members were within the normal range of the hand-wrist bone age. Others with a peak luteinizing hormone of ≥ 5 and < 5 IU/L were allocated to central precocious puberty (CPP) and peripheral precocious puberty (PPP), respectively. Results: Of the enrolled 270 patients, 195, 52, and 23 were allocated to the control, CPP, and PPP groups, respectively. The maxillary DDAs were significantly more prevalent in the CPP group than in the other groups. Among those with maxillary DDA, the mesiodens predominated. Age- and sex-adjusted multivariate analysis revealed maxillary DDA (odds ratio, 3.36; 95% CI, 1.60-7.05) and especially mesiodens (odds ratio, 5.52; CI, 2.29-13.28) to be significantly associated with CPP. Conclusions: Maxillary DDAs were significantly more prevalent in the CPP group than in the PPP or control groups. Among the many types of maxillary DDAs, mesiodens was significantly associated with CPP and may be considered a predictor of the development of CPP.