• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2017

PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.19-28
• /
• 2004

Tooth is the most important element in esthetic consideration on facial area. Tooth alignment which is in harmony with gingiva, lips, and face is also key element. The purpose of this study was to give a clinical discipline for restoration of gingival contour, which contains a ratio of maxillary 6 anterior teeth, research for gingival contour etc., in case of rehabilitation of maxillary anterior teeth. 300 Dankook university dental school students ,who is their twenties and free from periodontitis, participate in this study. The result was from each 70 males and females who had normal occlusion and tooth alignment. Length, width and length/width ratio of maxillary 6 anterior teeth were 0.74-0.81 in male, 0.81-0.84 in female. There was significant difference between male and female. The most deepest position of gingiva in maxillary central incisor and canine was located in distal part of teeth and maxillary lateral incisor was middle portion. In maxillary central incisors, gingival line of the most deepest point appeared significant difference between male and female (p<0.01) whereas there was no difference in lateral incisors and canines. Distance between interdental papilla apex and the most deepest portion appeared significant difference between male and female. Distance of the deepest position of gingiva is statistically significant except maxillary central incisors and lateral incisors. Standard deviation and mean of the width of labio-lingual were measured in cervical area and there was a significant difference both male and female.(p<0.01) From this result, we could get the mean of maxillary anterior gingival line and these results have great value in clinical guidance in studying maxillary anterior teeth.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.107-115
• /
• 1983

This study was performed in order to analyse the morphology of maxillary sinus on orthopantomogram. The author anlaysed the anterior-posterior width of mesial wall, the extension of anterior margin in maxillary sinus and the interrelation between the root apex of maxillary 1st molar and sinus floor. The films consisted of 514 orthopantomograms divided into three groups ranging the 3rd decade, 4th and 5th decade and 6th decade. The obtained results were as follows: 1. The mean dimensions of the anterior - posterior width of mesial wall were 43.81±4.55㎜ for male and 43.80±4.49㎜for female in the right of maxillary sinus, 43.75±74㎜ for male and 43.37±3.92㎜ for female. 2. With age, the dimensional change of the anterior - posterior width of mesial wall in maxillary sinus was not observed. 3. The extension order of anterior margin of the maxillary sinus was distal to canine side, 1st premolar mesial side, canine mesial side, and 1st premolar distal side. 4. In the distance between the root apex of upper 1st molar and the maxillary sinus floor, the degree of closeness was more increased in the older-aged group than in the younger-aged group.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.1
• /
• pp.115-124
• /
• 1994

The purpose of this study was to examine the differences in representation of a globular radiopaque mass on the pantomograms and Waters' views and to compare the efficacy of periapical radiograms, pantomograms and Waters' views in detection of defects on the internal walls of the maxillary sinus. This study was performed with dried human skull. For the study of difference of radiopaque mass shadow in the two views, rubber ball with a diameter of 10㎜ was used as the experimental lesion. It was placed successively on the internal wall of the anterior, posterior, medial, lateral walls and floor of the maxillary sinus. To examine the detectability of defects for radiographic techniques, defects were formed in the anterior, posterior, medial, lateral walls, and floor of the maxillary sinus. They were formed with 0.5㎜, 0.75㎜, 1.0㎜, 2.0㎜ and 3.0㎜ sized steel round burs with a slow speed dental handpiece. By subsequently plugging the holes with zinc oxide eugenol paste, radiopaque defects were produced. After that the periapical radiograms, the pantomograms and the Waters' views were taken each and every defect. The obtained results were as follows: 1. Rubber balls placed on each internal wall of the maxillary sinus were correctly depicted on the posterior wall and the floor in case of the pantomogram, and on the anterior wall and the medial wall in case of the Waters' view. 2. On the detectability of defects for each radiographic technique, radiolucent defects were detected in different places for each technique. Periapical radiogram could detect 1.0㎜ defect on the floor of the maxillary sinus, pantomogram could detect 2.0㎜ defect on every internal wall of the maxillary sinus, and Waters' view could detect 3.0㎜ defect on the anterior wall of the maxillary sinus. 3. On the detectability of defects for each radiographic technique, radiopaque defects were detected in different places for each technique. Periapical radiogram could clearly detect 0.5㎜ defect on the floor of the maxillary sinus, pantomogram could detect 0.5㎜ defect on every internal wall of the maxillary sinus, and finally Waters' view could detect 0.5㎜defect on the anterior wall of the maxillary sinus but 0.75㎜ defect on the anterior wall, lateral wall and floor of the maxillary sinus. As the result, the periapical radiogram is the most simple and satisfactory method for investigating in the maxillary sinus. The pantomogram is suitable method for screening of changes in the maxillary sinus. And the Waters' view is available for detect of lesion in the anterior wall of the maxillary sinus. For the purpose of accurate diagnosis and evaluation of lesion in the maxillary sinus, these techniques supplement each other.

• Journal of Korean Dental Science
• /
• v.9 no.2
• /
• pp.49-54
• /
• 2016

Purpose: The purpose of this study was to assess the relationship between gingival biotype and underlying crestal bone morphology in the maxillary anterior region. Materials and Methods: The maxillary anterior teeth from 40 subjects (20 thin biotype, 20 thick biotype) with ages from 20 to 50 years were included in this study. All subjects had healthy gingiva in the maxillary anterior region and had no history of orthodontic treatment, periodontal treatment, or hyperplastic medication. Using the probe transparency method, the scalloped distance (SCD) between the contact point-bone crest and the midface-bone crest was measured for each maxillary anterior teeth of two groups. Result: The mean SCD was $3.00{\pm}0.21mm$ in thin biotype and $2.81{\pm}0.20mm$ in thick biotype. The SCD value in the thin biotype was statistically significantly greater than in the thick biotype (t=2.982, P<0.01). Comparing the degree of crestal bone scallop in each maxillary anterior teeth in the two groups, all six teeth in the thin biotype showed higher bone scallop than in the thick biotype. Conclusion: A simple procedure using a probe could to determine gingival biotype and to predict the underlying crestal bone morphology was introduced. This may be useful for effective treatment planning.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.103-112
• /
• 1990

The purpose of this study was to estimate absorbed dose of each important anatomic site of phantom (RT-2l0 Head & Neck Section/sup R/, Humanoid Systems Co., U.S.A.) head in occlusal radiography. X-radiation dosimetry at 12 anatomic sites in maxillary anterior topography, maxillary posterior topography, mandibular anterior cross-section, mandibular posterior cross-section, mandibular anterior topographic, mandibular posterior topographic occlusal projection was performed with calcium sulfate thermoluminescent dosimeters under 70Kvp and 15mA, 1/4 second (8 inch cone) and 1 second (16 inch cone) exposure time. The results obtained were as follows: Skin surface produced highest absorbed dose ranged between 3264 mrad and 4073 mrad but there was little difference between projections. In maxillary anterior topographic occlusal radiography, eyeballs, maxillary sinuses, and pituitary gland sites produced higher absorbed doses than those of other sites. In maxillary posterior topographic occlusal radiography, exposed eyeball site and exposed maxillary sinus site produced high absorbed doses. In mandibular anterior cross-sectional occlusal radiography, all sites were produced relatively low absorbed dose except eyeball sites. In mandibular posterior cross-sectional occlusal radiography, exposed eyeball site and exposed maxillary sinus site were produced relatively higher absorbed doses than other sites. In mandibular anterior topographic occlusal radiography, maxillary sinuses, submandibular glands, and thyroid gland sites produced high absorbed doses than other sites. In mandibular posterior topographic occlusal radiography, submandibular gland site of the exposed side produced high absorbed dose than other sites and eyeball site of the opposite side produced relatively high absorbed dose.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.241-246
• /
• 2017

Purpose: The aim of this study was to compare the root surface areas of the maxillary permanent teeth in Thai patients exhibiting anterior normal overbite and in those exhibiting anterior open bite, using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of maxillary permanent teeth from 15 patients with anterior normal overbite and 18 patients with anterior open bite were selected. Three-dimensional tooth models were constructed using Mimics Research version 17.0. The cementoenamel junction was marked manually. The root surface area was calculated automatically by 3-Matic Research version 9.0. The root surface areas of each tooth type from both types of bite were compared using the independent t-test (P<.05). The intraclass correlation coefficient was used to assess intraobserver reliability. Results: The mean root surface areas of the maxillary central and lateral incisors in individuals with anterior open bite were significantly less than those in those with normal bite. The mean root surface area of the maxillary second premolar in individuals with anterior open bite was significantly greater than in those with normal bite. Conclusion: Anterior open-bite malocclusion might affect the root surface area, so orthodontic force magnitudes should be carefully determined.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.639-651
• /
• 2006

This study was performed to investigate the survival rate of single implant used in maxillary anterior region during follow up periods. 231 patients whose single missing tooth in maxillary region had been replaced with 237 implant at the periodontal dept. of Yonsei University Hospital between February 1993 and December 2004. The following results are compiled from 231 patients who received single implant surgery. 1. The major cause of single tooth loss in maxillary anterior region is trauma, followed by periodontal disease and congenital missing. 2. The total survival rate of single implant placed in maxillary anterior region is 94.5%. 3. The survival rate of single implant placed in type II and type IV was 100% and in type III was 92.7%. As for the bone quantity, the survival rate in type A(100%) was most, followed by type B(97.3%) and type C, D (93.5%). 4. The survival rate of implant placement combined with advanced surgery was 94.4%. The results showed that the placement of single implant is considered as a reliable treatment option for a single missing tooth in maxillary anterior region except in certain extreme conditions especially with poor bone quality and quantity.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.175-180
• /
• 2018

Background: The facial bone has a complex structure compared to other bones, and various types of fractures can occur due to its characteristics. Among them, in comminuted fractures of anterior maxillary wall, multiple depressed and impacted bony segments cannot be reduced easily when performing internal fixation using plates and screws or wires, and inadequate restoration leads to a range of complications. This paper introduces an alternative technique using a resorbable mesh with fibrin glue to restore comminuted fractures of anterior maxillary wall. Methods: Thirteen patients were diagnosed with comminuted fractures of anterior maxillary wall between March 2017 and February 2018 in the authors' hospital. All patients with comminuted fractures of anterior maxillary wall underwent restoration using resorbable mesh with fibrin glue. The patients' demographics, causes of facial trauma, mean operation time, length of hospital stay, follow-up period, and complications were recorded. Results: No major complications and only one hypoesthesia of the skin area was noted. Three months after surgery, the hypoesthesia recovered completely. After surgery (mean, 3.9 months; range, 2-12 months), computed tomography showed that the bone fragments in all patients were fixed successfully in their anatomical places. Conclusion: In comminuted fractures of anterior maxillary wall, the use of a resorbable mesh with fibrin glue can be an advantageous and effective method for a successful restoration without complications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.20.1-20.7
• /
• 2020

Background: Anterior open bite is a challenging malocclusion to correct orthodontic treatment. Anterior open bite associated with over-erupted posterior teeth and long lower facial height should be treated by reduction of posterior dimension for esthetic results. Although the possibility of orthodontic treatment of an anterior open bite has increased with the introduction of skeletal anchorage, there are still cases requiring surgery for various reasons. Case presentation: This case report covers an anterior open bite of a 25-year-old man successfully treated with the posterior maxillary segmental osteotomy (PMSO) and miniplates. After the pre-surgical orthodontic treatment, the PMSO between canines and first premolars was performed under local anesthesia and miniplates were placed on the zygomatic buttress. As a result of 28 months of treatment, an impaction amount of 3.5 mm was obtained in the maxillary posterior teeth, and the facial esthetics improved at rest and smile. Conclusion: The impaction of the posterior dentoalveolar segment using the PMSO can be a good treatment option in patients with anterior open bite showing long lower facial height.