• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.97-103
• /
• 2013

The purpose of this study was to verify the change in temperature humidity perspiration of fire suit when applying phased intensive exercises to fire fighter wearing fire suit. For this study, three male fire fighters took basic physical test and performed 10 minute phased intensive exercises -exercise intensity I (30%VO2max), exercise intensity II (45%VO2max), exercise intensity III (60%VO2max) based on maximum oxygen consumption (VO2max)- wearing fire suit (helmet, boots, air respirator) in treadmill and took a rest. The result of study shows that the temperature in the suit elevated during stabilization period after each exercise intensity, humidity elevated as exercise intensity increased, perspiration elevated as exercise intensity increased. This study indirectly ascertained the fire suit's physiological change in fire fighters during field activities.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.175-180
• /
• 2015

In this study, ternary compound Max Phase $Ti_2AlC$ material was mixed by 3D ball milling as a function of ball milling time. More than 99.5 wt% pure $Ti_2AlC$ was synthesized by using spark plasma sintering method at 1000, 1100, 1200, and $1300^{\circ}C$ for 60 min. The material characteristics of synthesized samples were examined with relative density, hardness, and electrical conductivity as a function of sintering temperature. The phase composition of bulk was identified by X-ray diffraction. On the basis of FE-SEM result, a terraced structures which consists of several laminated layers were observed. And $Ti_2AlC$ bulk material obtained a vickers hardness of 5.1 GPa at the sintering temperature of $1100^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.19-24
• /
• 1997

Composition and process conditions for low temperature sintered NiCuZn ferrites were investigated, so as to fabricate multilayered chip inductor. The$Fe_2O_3$ deficiency for low temperature sintering was decreased with NiO contents of NiCuZn ferrites. The permeability of NiCuZn ferrites can be controlled in the range of 12~562 with the variation of NiO and $Co_3O_4$ contents. The $Q_{max} $ frequency of NiCuZn ferrites was decreased from 50 MHz to 3 MHz linearly with permeability increase from 60 to 560. The relation between the $Q_{max}$ frequency(Y) and permeability(X) of NiCuZn ferrites was expressed with the following empirical equation, logY=4.2-1.4logX.

• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.601-608
• /
• 2017

The effects of elevated atmospheric $CO_2$ on growth and photosynthesis of soybean (Glycine max Merr.) were investigated to predict its productivity under elevated $CO_2$ levels in the future. Soybean grown for 6 weeks showed significant increase in vegetative growth, based on plant height, leaf characteristics (area, length, and width), and the SPAD-502 chlorophyll meter value (SPAD value) under elevated $CO_2$ conditions ($800{\mu}mol/mol$) compared to ambient $CO_2$ conditions ($400{\mu}mol/mol$). Under elevated $CO_2$ conditions, the photosynthetic rate (A) increased although photosystem II (PS II) photochemical activity ($F_v/F_m$) decreased. The maximum photosynthetic rate ($A_{max}$) was higher under elevated $CO_2$ conditions than under ambient $CO_2$ conditions, whereas the maximum electron transport rate ($J_{max}$) was lower under elevated $CO_2$ conditions compared to ambient $CO_2$ conditions. The optimal temperature for photosynthesis shifted significantly by approximately $3^{\circ}C$ under the elevated $CO_2$ conditions. With the increase in temperature, the photosynthetic rate increased below the optimal temperature (approximately $30^{\circ}C$) and decreased above the optimal temperature, whereas the dark respiration rate ($R_d$) increased continuously regardless of the optimal temperature. The difference in photosynthetic rate between ambient and elevated $CO_2$ conditions was greatest near the optimal temperature. These results indicate that future increases in $CO_2$ will increase productivity by increasing the photosynthetic rate, although it may cause damage to the PS II reaction center as suggested by decreases in $F_v/F_m$, in soybean.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.762-766
• /
• 1995

The coercive field $H_{c}$ of amorphous Y-Fe alloys in the spin-glass state has been investigated. Foramorphous $Y_{10}Fe_{90}$ alloy, the thermal variations of $H_{c}$ in the maximum external field $H_{max}=300,\;600$ and 1 k Oe exhibit a maximum. Since spin-glass behavior is strongly affected by external magnetic fields, the maximum point moves to lower temperature with increasing $H_{max}$. The appearance of the maximum in $H_{c}$ has been discussed in terms of the change of the spin-glass state in the external magnetic field. When the value of $H_{max}$ is 55 kOe, the temperature dependence of $H_{c}$ has no maximum and shows an exponential decrease with increasing temperature. Similar trends have been observed over a wide concentration range. The concentration dependence of $H_{c}$ is associated with the magnetic phase diagram.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.439-448
• /
• 1996

The possibility of application or the transparent BK10 glass fiber/PMMA composites as a temperature-or wavelength-sensors was studied. Measurement of diameter and refractive index for glass fibers to be reinforced to PMMA as a function of drawing speed and temperature was done and the appropriate coating methods and solvent for coupling agent was researched. $T_{max%}$ value at which the maximum transmission for the composites occurs could be controlled to be in $31~50^{\circ}C$ by the processing factors such as fiber diameter, fiber vol%, molecular wt. of PMMA. Furthermore, with different wavelength other than 589.3 nm, the $T_{max%}$ value could be controlled to be in $35~55^{\circ}C$. For the sensibility of wavelength for the composites, there was not a wavelength ($\lamda_{max%}$) showing maximum transmission.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.83-89
• /
• 2004

NTC thermistor embedded miniature thermoelectric module was fabricated for the precise temperature control of optical communication device such as laser diode (LD). The miniature thermoelectric module ($7.2 mm{\times}9 mm{\times}2.2 mm$) consists of 21 BiTe thermoelectric couples, the operating temperature is precisely controlled by embedded thermistor with quick response. The figure-of-merit (Z), maximum temperature difference (${\Delta}T_{max}$), maximum cooling capacity ($Q_{max}$) of the miniature thermoelectric module were $2.5{\times}10^{-3}$/K, 72 K, 2.2 W respectively and temperature could be controlled in range of ${\pm}0.1^{\circ}C$ accuracy in air. The fabricated miniature thermoelectric module is suitable for applications of the optical communication packaging.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.384-388
• /
• 1995

High content of polyunsaturated fatty acid in fish oil makes it very susceptible to oxidation, which prevent fish oil from successful application to food processing or functional foods. To resolve this problem, oxidation stability model of fish oil was developed using the following differential equation : $dp/dt=k{\cdot}p(t){\cdot}[P_{max}\;-\;p(t)]$. This differential equation can be intergrated using analytical techniques to give : $p(t)=P_{max}/[1\;+\;[(P_{max}/P_{(0)})\;-\;-1]{\cdot}EXP(-K_p{\cdot}t)]$. At 50, 60, 70 and $80^{\circ}C,\;K_p$ were 0.00535, 0.01345, 0.02516 and 0.04675, respectively. The proposed model was well agreed with the measured data except for some minor deviations. In addition, $K_p$ was expressed as a function of temperature : $K_p=(1/P_{max})EXP\;[1\;-\;(8148/T)+20.1]$. Where T is absolute temperature($^{o}K$).

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.59-62
• /
• 2002

Magnetic tunnel junctions (MTJs) were fabricated with high bias for plasma oxidation and the effects of annealing on the temperature dependence of tunneling magnetoresistance (TMR) were investigated experimentally. As-grown, TMR increases, peaks around 160 K, and decreases with increasing temperature from 80 K to 300 K. When MTJs are annealed, $T_{max}$, the temperature at which maximum TMR is obtained, decreases as annealing temperature increases to the optimal point. In order to explain this abnormal temperature dependence of TMR, the difference of conductance between parallel and antiparallel alignments of magnetizations as a function of temperature is also analyzed. The shifts of $T_{max}$ due to annealing process are described phenomenologically with spin-dependent transfer rates of electrons tunnel through the barrier.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_1
• /
• pp.411-419
• /
• 2021

In this study, IGBT_Total_Loss and DIODE_Total_Loss were used to analyze the slope of the junction temperature for each section for temperature and duty variables in order to simply calculate the junction temperature of the power semiconductor (IGBT). As a result of the calculation, IGBT_Max_Junction_Temp and DIODE_Max_Junction_Temp form a proportional relationship with temperature for each duty. This simulation data shows that the power loss of a power semiconductor is calculated in a complex manner according to the current dependence index, voltage dependence index, and temperature coefficient. By applying the slope for each condition and section, the junction temperature of the power semiconductor can be calculated simply.