• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.604-608
• /
• 2016

In recent years, research and development has been carried out in order to increase the economical efficiency and stability in terms of efficient use of energy for the heating apparatus. Especially, technology development for high performance and new functional materials is actively being carried out. This paper focuses on the development of exothermic products with excellent energy transfer characteristics. The heating element used for bedding or mattress uses a heating wire. Since the heating wire is thin, the distribution of heat is concentrated only around the heating wire,. In addition, electromagnetic induction is harmful to the human body and energy consumption is high. Therefore, it is aimed to develop a planar heating panel using SiC ceramics which can radiate far-infrared rays and anions to be harmless to the human body, but also has excellent heat conduction to enhance energy efficiency.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1330-1338
• /
• 2011

Social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities increase, so does the occurrence of falls that could lead to fractures. Falls are serious health hazards to the elderly. Therefore, development of a device that can detect fall accidents and prevent fracture is essential. In this study, we developed a portable fall detection system for the fracture prevention system of the elderly. The device is intended to detect a fall and activate a second device such as an air bag deployment system that can prevent fracture. The fall detection device contains a 3-axis acceleration sensor and two 2-axis tilt sensors. We measured acceleration and tilt angle of body during fall and activities of daily(ADL) living using the fall detection device that is attached on the subjects'. Moving mattress which is actuated by a pneumatic system was used in fall experiments and it could provide forced falls. Sensor data during fall and ADL were sent to computer and filtered with low-pass filter. The developed fall detection device was successful in detecting a fall about 0.1 second before a severe impact to occur and detecting the direction of the fall to provide enough time and information for the fracture preventive device to be activated. The fall detection device was also able to differentiate fall from ADL such as walking, sitting down, standing up, lying down, and running.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.219-226
• /
• 2005

Muller's muscle-levator aponeurosis advancement procedure was performed to correct mild to moderate congenital blepharoptosis with moderate to good levator function and to correct severe aquired blepharoptosis with poor levator function. Through the blepharoplasty incision, the upper half of the tarsal plate was exposed and the orbital septum was opened to show the levator aponeurosis. The Muller's muscle was dissected from the superior margin of the tarsal plate and from the posteriorly located conjunctiva with sharp scissors. The Muller's muscle and levator aponeurosis were advanced on the anterior surface of the tarsal plate as a composite flap and fixed approximately 3 to 4 mm inferior to the upper edge of the tarsal plate with three horizontal 6-0 nylon mattress sutures. The amount of advancement of the composite flap was controlled by the location of the upper eyelid margin 2 mm below the upper limbus in primary gaze after the first suture in the middle portion of the flap. The excess flap was trimmed off with scissors, but trimming was usually not necessary in cases of mild to moderate ptosis. Nine cases underwent this Muller's muscle-levator aponeurosis advancement procedure from September 2003 to September 2004. Five cases were congenital blepharoptosis with 2-4 mm ptosis and more than 5 mm of levator function, but three of the four acquired ptosis cases had more than 4 mm ptosis with poor levator function. The age of the patients ranged from 7 to 81 years. In operative results, all patients except one traumatic case were within 1 mm of the desired eyelid height in primary gaze. This procedure can provide not only tightening of the Muller's muscle but also advancement and firm fixation of the levator aponeurosis to the tarsal plate, yielding predictable results.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.11-17
• /
• 2009

Background: The purpose of this study was designed to find out the effectiveness of reposition sense, muscle fatigue response on lumbar spine after apply lumbosacral stabilization exercise program to 4 patients with chronic low back pain and for 12 weeks. Method: In this study the reposition sense was measured in 3 angle(60, 30, 12) of the lumbar spine motion with blind by MedX test machine and the difference of instability to lumbar vertebra segments in flexion, extension test of standing position and spinal load test Mattress Test by Spinal Mouse. The stabilization exercise program was applied 2 times a week for 12 weeks in hospital and 2 times a day for 20 minutes at home. Result: The results of the present study were that the repositioning sense was appeared the most error in 12 angles of lumbar flexion and Men was appeared to decrease an error more than female in average value of 4 angles after 12 weeks. And average error of male was decrease more than female. Thus the effects of lumbosacral stabilization exercise was improved repositioning sense of prorioceptor. Fatigue response test(FRT) results, in male, was raised muscle fatigue rate during increase weight, on the other hand female appeared lower than male. Conclusion: As a results, lumbosacral stabilization exercise was aided to improvement of lumbar spine repositioning sense and vertebra segments stabilization. It was showed the rate of decrease in typically 12 degree angle point of each 3 angle(60, 36, 12). Especially, that spine instability patients will have a risk when in lifting a load or working with slight flexion posture around 12 degree during the daily of living life and it is probably to increase recurrence rate. Thus, not only lumbar extension muscle strength but also stability of vertebra segments in lumbar spine may be very important.

• 보존과학연구
• /
• s.6
• /
• pp.96-110
• /
• 1985

This report is briefly thied to introduce the kinds of clothes for the body of deceased and special features of remains in the era of the middle of Yidynasty found in Changheung IM's tomb, and some remarks related to the conservation treatment for shrouds as well. The contents of this report are summed up as follows:1. Included with the clothes of dead body of IM's clan were 2 pcs. Of woman's jacket, 2 pcs. of underpants, 1pcs. of single layered overcoat twithout cotton, 1pcs.of women's overcoat with a single layered thin cotton inside, women's socks, cushoned mattress, straw shoes and other hemp fabrics etc. By the observation of these remains, it is considered that they dressed the deceased with new cloth taken from the unsuals not prepared specially and stored beforehand for such as occasion as does it nowadays.2. As to the conservation treatment, the materials were comparatively good and so they employed general tank washing method with special neutrality liquid soap(made by Lab, of Household Products, Pacific R & D Center) for cleaning imbrued matrials on the clothes. After cleaning and drying naturally at a shade place, remains put into apaulowania tree box were fumigated by mixed gas (M. B. + E. O.) for prevention of damages from fungi and insects.3. Desirable environment control for scientific conservation of such kinds of cellulose textiles is to be illuminated at below 50Lux, temperature 16-18℃, relative humidity 45-60%($\pm$4%) and removed the dust. For the prevention of the damaging fungi and insects, it is desirable to fumigate by mixed gas (M.B.+E.O.) once a year.

• Journal of Chest Surgery
• /
• v.23 no.5
• /
• pp.844-853
• /
• 1990

We have performed 27 cases of orthotopic homologous cardiac transplantation using Korean mongrel dogs and one case of sham operation for the evaluation of harmful effect of cardiopulmonary bypass itself on the dog from April, 1989 to June, 1990. Our previous reports have already demonstrated basal hemodynamic and hematologic data on the canine homologous heart transplantation and the fundamental principles of transplantation of the heart. The mean body weight of recipients was 13.2$\pm$1.2kg with a rage of 11 ~ 15kg, and the hemodynamic and hematologic pictures were almost same as the result of previous reports from our hospital, except marked decrease in postoperative platelet count[from 3.18 $\pm$0.80x106/mm3 to 1.41$\pm$0 37x 106/mm3]. Mean survival time was 24.82$\pm$49.40 hours with the longest survival of 264 hours. Donor cardiectomy included coronary vasodilatation with diltiazem, potassium arrest, and the rapid cooling of the heart suspending in the specially designed ice-bath. Median sternotomy provided excellent exposure of the surgical field. 6 \ulcorner0 prolene suture was used for the anastomosis of both atrial cuffs and the great arteries, and we found the fact that stenosis, bleeding, thrombus formation around the anastomotic site could be decreased with the use of everted horizontal mattress suture techniques. Immunosuppression was done with a combination of lower dose Cyclosporin-A, Azathioprine, methyl-prednisolone, but our cases still showed too short survival to worry about graft rejection. Still poor was our quality control of experimental animal, we had much difficulties in postmortem evaluation of the dogs. Low cardiac output due to biventricular failure, intractable supraventricular or ventricular tachyarrhythmia, postoperative massive bleeding, sepsis were most frequent findings that could be thought as a cause of death. A few cases showed subendocardial patch hemorrhage in both ventricular cavity or atrial septum at autopsy, suggesting acute subendocardial infarction. Although our team overcome most of the technical problems of orthotopic heart transplantation, we should pile up further knowledges about donor heart preservation, quality control of animal, infection, rejection, the effect of the cardiopulmonary bypass to improve the results.

• Journal of the Korean Home Economics Association
• /
• v.46 no.4
• /
• pp.83-96
• /
• 2008

The purpose of this study is to grasp the opinion of Korean feminine seniors on the life support appliances for their healthy ageing: medication dispenser, video phone, activity monitor and sleep monitor. The focus group interviews, asking the usability of the appliances, were answered by each 6 feminine seniors of more than 65 years, residing in Corvallis of U.S.(group I), Cheongju(group II), and Ulsan(group III) of Korea. The results are as follows. (1) The medication dispenser proved to be very useful to all the respondents. All the seniors, who take more than one medicine a day, felt it helpful that the medication dispenser makes them to take medicines at fixed time. In addition, they hoped the medicine envelope to be developed for the dispenser use by the supply side. (2) The seniors showed interest in the manner the video phone works; to work by the voice, rather than by the finger. They expressed the hope of the video phone to display the communication contents, in consideration of their weakening hearing. (3) The seniors who live alone, especially, felt intimacy to the activity monitor, thinking as if some helpers were beside them. The fact that it can send emergency calls immediately when situations happen, gave the seniors emotional safety as a patron. (4) The sleep monitor, although essential to the serious cases without moving ability, was proved less necessary to the healthy seniors. They expressed the hope of this appliance to be evolved for the use with the mattress without bed.

• Journal of Periodontal and Implant Science
• /
• v.46 no.6
• /
• pp.415-425
• /
• 2016

Purpose: The present study investigated the impact of 2 different suture techniques, the conventional crossed mattress suture (X suture) and the novel hidden X suture, for alveolar ridge preservation (ARP) with an open healing approach. Methods: This study was a prospective randomized controlled clinical trial. Fourteen patients requiring extraction of the maxillary or mandibular posterior teeth were enrolled and allocated into 2 groups. After extraction, demineralized bovine bone matrix mixed with 10% collagen (DBBM-C) was grafted and the socket was covered by porcine collagen membrane in a double-layer fashion. No attempt to obtain primary closure was made. The hidden X suture and conventional X suture techniques were performed in the test and control groups, respectively. Cone-beam computed tomographic (CBCT) images were taken immediately after the graft procedure and before implant surgery 4 months later. Additionally, the change in the mucogingival junction (MGJ) position was measured and was compared after extraction, after suturing, and 4 months after the operation. Results: All sites healed without any complications. Clinical evaluations showed that the MGJ line shifted to the lingual side immediately after the application of the X suture by $1.56{\pm}0.90mm$ in the control group, while the application of the hidden X suture rather pushed the MGJ line slightly to the buccal side by $0.25{\pm}0.66mm$. It was demonstrated that the amount of keratinized tissue (KT) preserved on the buccal side was significantly greater in the hidden X suture group 4 months after the procedure (P<0.05). Radiographic analysis showed that the hidden X suture had a significant effect in preserving horizontal width and minimizing vertical reduction in comparison to X suture (P<0.05). Conclusions: Our study provided clinical and radiographic verification of the efficacy of the hidden X suture in preserving the width of KT and the dimensions of the alveolar ridge after ARP.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.713-720
• /
• 2006

Heat conductivity, height, size, elasticity of pillow, stability of shape, hygroscopicity, ventilation, temperature and easy movability, and so on, are considered to be some of major conditions that affect the comfortable sleep. Considering those factors together, the thermal properties, height, shape and feeling of touch, etc, of pillow must be taken into account. Though studies have been conducted to figure out the physical properties of mattress or pillows from the perspective of factors related to the environment of sleep, they are not enough to be used as an index to evaluate the qualitative aspect of sleep. This study tries to consider the effect of pillow filling materials on the comfortable sleep, for which EEG, ECG, EOG, EMG, RT, etc, are to be measured in an attempt to provide the basic data required in proposing the condition that may lead to a sound and comfortable sleep. Three types of pillows that are sold in the market were used for this research in order to evaluate the quality of sleep depending on the filling materials of pillow. All data were statistically processed and the following conclusions were drawn. It was found that the pillow with feathers provided the best comfort as the pillow A turned out to have the shortest sleeping latency(SL) from the perspective of comfort. The pillow B which used the polyethylene is deemed to be suitable for fatigue relieving purpose as it turned out to have the highest slow wave sleep(SWS), but no statistically significant difference was validated. Moreover, the pillow C which used the natural wool was found to have the narrowest contacting area of the pillow and head and provide a great warm heat comfort that may led to a sound sleep because the temperature below the pillow took the longest time to rise.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.143-147
• /
• 2011

Purpose: A Tessier classification number 7 cleft is an uncommon malformation that results from a failure of mesenchymal fusion within the maxillary and mandibular prominences of the 1st pharyngeal arch. Many operative techniques of the number 7 cleft repair have been proposed to restore function and improve aesthetics. Fifteen patients underwent repair of a number 7 cleft over 13 years by a modification of the surgical Technique, and an appraisal of the operative outcome is reported herein. Methods: A retrospective review was conducted involving 15 patients with number 7 clefts who underwent surgery from 1996 to 2009. The changes in surgical technique included skin closure, attachment of the orbicularis oris muscle, and position of the repaired commissure; the changes were analysed with a review of the medical records and the outcomes of surgery were analysed via photographs. Specifically, the technique of skin closure was changed from the a Z-plasty to a linear closure, the orbicularis oris muscle overlapped attachment was replaced by a side-to-side approximation with horizontal mattress sutures, and the position of the repaired commissure was changed from 1 mm laterally to 1 mm medially in reference to the non-cleft side. Results: A Z-plasty caused additional cutaneous scarring, an overlapped attachment of the orbicularis oris muscle caused a thick oral commissure, and the repaired commissure migrated to the lateral side, so a 1 mm, laterally-positioned commissure caused asymmetry. The altered procedure included a linear skin closure, a side-to-side orbicularis oris muscle approximation, and a 1 mm, medially-positioned commissure, which together resulted in a good outcome. Conclusion: The altered procedure for repair of a number 7 cleft as described herein, yields a short scar, no functional problems with the orbicularis oris muscle, a thin oral commissure, and symmetry of the repaired commissure.