• Advances in concrete construction
• /
• 제8권1호
• /
• pp.55-64
• /
• 2019

Chloride corrosion has become the main factor of reducing the service life of reinforced concrete structures. The object of this paper is to propose a theoretical model that predicts the service life of chloride-corrosive concrete under fatigue load. In the process of modeling, the concrete is divided into two parts, microcrack and matrix. Taking the variation of mcirocrack area caused by fatigue load into account, an equation of chloride diffusion coefficient under fatigue load is established, and then the predictive model is developed based on Fick's second law. This model has an analytic solution and is reasonable in comparison to previous studies. Finally, some factors (chloride diffusion coefficient, surface chloride concentration and fatigue parameter) are analyzed to further investigate this model. The results indicate: the time to pit-to-crack transition and time to crack growth should not be neglected when predicting service life of concrete in strong corrosive condition; the type of fatigue loads also has a great impact on lifetime of concrete. In generally, this model is convenient to predict service life of chloride-corrosive concrete with different water to cement ratio, under different corrosive condition and under different types of fatigue load.

• 대한지하수환경학회지
• /
• 제1권2호
• /
• pp.100-104
• /
• 1994

기질내에서의 원소의 확산현상은 흡착 및 비흡착성 방사성핵종의 지하매질내 이동을 지연시키는 특성때문에 처분장의 안전성평가에서 매우 중요한 현상으로 간주된다. 이 현상을 실제 안전성평가에 적용하기 위하여 확산현상이 인지되는 자연현상 중에서 자연방사성원소의 농도변화 및 붕괴사슬을 이용한 자연유사 연구가 많이 수행되고 있고 그 현상이 준정량적으로 확인된다. 기질내 원소의 확산현상은 액체상의 흐름에 수반되어 일어나거나 열적 영향에 의해 국부적으로 일어나기도 하는데 후자의 경우는 고준위 방사성페기물 처분과 관련된 안정성평가에 그 중요성을 갖는다. 예를 들어 내덕리 화강암이 후기에 관입한 페그마타이트와 접촉하는 곳에서는 페그마타이트의 열적 영향에 의해 K, Rb, Sr 및 Ba과 같은 알카리 또는 알카리토 원소들과 Li, V및 Nb원소들이 접촉면으로부터 수직으로 약 9 cm 정도의 거리에 이르기까지 부화 또는 결핍된 이동현상이 관찰된다. 그러나 운반모델 설정을 위한 화산시간의 규모, 기질내 흡착된 핵종과 확산된핵종의 구분 등에 관한 연구는 필요한 시료의 취득치 불가능하여 이를 수행하지 못한 경우가 많다 이러한 문제점에도 불구하고 국내 처분장의 안전성 평가시에는 처분매질에 대하여 기질내 확산현상을 어느 정도 고려할 수 있는지를 자연유사 연구를 통해 규명되어야 할 것이다.

• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.153-163
• /
• 2018

재난 안전 R&D는 현재 사업목표 및 성과달성을 위한 효과적인 운영 관리체계가 미흡한 실정이다. 따라서 재난안전 분야 R&D 사업에 대한 실무적 차원의 성과관리 체계가 마련되어야 하고 이를 위해서는 성과관리 프로세스 수립을 위한 연구가 필요한 실정이다. 본 연구에서는 국제공인 프로젝트 관리 지식체계 지침서인 PMBOK(Project Management Body of Knowledge)에 제시된 프로젝트 관리체계를 도입하여 재난안전 R&D 성과관리 매트릭스를 정의하였고 업무프로세스 분석과 성과실적 검토를 통해 부처 내 R&D 성과관리체계의 취약부분을 도출하였다. 과학기술기본법, 재난 및 안전관리기본법 등 재난안전 R&D 관련 법에 명시된 성과관리 관련 업무를 바탕으로 5개 프로세스 그룹, 7개 성과관리 지식영역 및 47개 프로세스로 재난안전 R&D 성과관리 매트릭스를 구성하였고, 업무분석을 통해 성과확산 환류 지식영역 관련 프로세스가 현행 재난안전 R&D 성과관리 업무의 취약프로세스로 평가되었다. 따라서 본 연구에서는 업무 취약부분인 성과확산 환류 지식영역에 대해서 PMBOK에서 프로세스를 정의하는 방식과 동일하게 ITO(Inputs-Tool&Techniques-Outputs)를 정의하고 데이터 흐름도를 개발하여 재난안전 R&D 성과확산 및 환류를 위한 업무에 활용할 수 있도록 제안하였다. 본 연구를 통해 제안한 재난 안전 분야 R&D 성과확산 관련 프로세스는 부처 내 R&D 성과확산 활용 업무 전문성을 확보하기 위한 기초자료로 활용되고 더 나아가 재난안전 R&D 사업을 통해 개발된 기술이 기술이전 및 기업 매출액 증대 등 사업화 성과의 확산을 위한 초석을 다지는데 기여할 수 있을 것이라 판단된다.

• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.336-341
• /
• 2009

To produce alloy powders with only Sm$_2$Fe$_{17}$ single phase by reduction-diffusion (R-D) method, the effect of excess samarium oxide on the preparation of Sm-Fe alloy powder during R-D heat treatment was studied. The quantity of samarium oxide was varied from 5% to 50% whereas iron and calcium were taken 0% and 200% in excess of chemical equivalent, respectively. The pellet type mixture of samarium, iron powders and calcium granulars was subjected to heat treatment at 1100$^{\circ}C$ for 5 hours. The R-D treated pellet was moved into deionized water and agitated to separate Sm-Fe alloy powders. After washing them in deionized water several times, the powders were washed with acetic acid to remove the undesired reaction products such as CaO. By these washing and acid cleaning treatment, only 0.03 wt% calcium remained in Sm-Fe alloy powders. It was also confirmed that the content of unreacted $\alpha$-Fe in Sm$_2$Fe$_{17}$ matrix gradually decreased as the percentage of samarium oxide is increased. However, there was no significant change above 40% excess samarium oxide.

• 한국재료학회지
• /
• 제26권12호
• /
• pp.751-756
• /
• 2016

Graphite was diffusion-bonded by hot-pressing to W-25Re alloy using a Ti interlayer. For the joining, a uniaxial pressure of 25 MPa was applied at $1600^{\circ}C$ for 2 hrs in an argon atmosphere with a heating rate of $10^{\circ}C\;min^{-1}$. The interfacial microstructure and elemental distribution of the W-25Re/Ti/Graphite joints were analyzed by scanning electron microscopy (SEM). Hot-pressed joints appeared to form a stable interlayer without any micro-cracking, pores, or defects. To investigate the high-temperature stability of the W-25Re/Ti/Graphite joint, an oxy-acetylene torch test was conducted for 30 seconds with oxygen and acetylene at a 1.3:1 ratio. Cross-sectional analysis of the joint was performed to compare the thickness of the oxide layer and its chemical composition. The thickness of W-25Re changed from 250 to $20{\mu}m$. In the elemental analysis, a high fraction of rhenium was detected at the surface oxidation layer of W-25Re, while the W-25Re matrix was found to maintain the initial weight ratio. Tungsten was first reacted with oxygen at a torch temperature over $2500^{\circ}C$ to form a tungsten oxide layer on the surface of W-25Re. Then, the remaining rhenium was subsequently reacted with oxygen to form rhenium oxide. The interfacial microstructure of the Ti-containing interlayer was stable after the torch test at a temperature over $2500^{\circ}C$.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 추계 총회 및 학술발표회
• /
• pp.69-70
• /
• 1997

Polyimides and related polymers, when synthesized from aromatic monomers, have generally rigid chain structures resulting in a low gas permeability. The rigidity of polymer chains reduces the segmental motion of chains and works as a good barrier against gas transport. To overcome the limit of use as materials of gas separation membranes due to low gas permeability, block copolymers with the incorporation of flexible segments like siloxane linkage and ether linkage have been studied. These block copolymers have microphase-separated structures composed of microdomains of flexible poly(dimethylsiloxane) or polyether segments and of rigid polyimides segments. In case of rigid-flexible block copolymers, the characteristics of both phases for gas permeation are of great difference. The permeation of gas molecules occurs favorably through microdomains of flexible segments, whereas those of rigid segments hinder the permeation of gas molecules. Accordingly the increase of content of flexible segments in a rigid polymer matrix will increase the gas permeability of the membrane linearly. However, this prediction does not satisfy enough many experimental results and in particular the drastic increase of the permeability is observed in a certain volume fraction. It was proposed that the gas transport mechanism is dominated by diffusion rather than gas solubility in a certain content of flexible phase if solution-diffusion mechanism is adopted. However, the transition from solubility-dependent to diffusion-dependent cannot be explained by the understanding of mechanism itself. Therefore, we consider an effective chemical path which permeable phase can form in a microheterogenous medium, and percolation concept is introduced to describe the permeability transition at near threshold where for the first time a percolation path occurs. The volume fraction of both phases is defined as V$_{\alpha}$ and V$_{\beta}$ in block copolymers, and the volume of $\beta$ phase in the threshold forming geometrically a traversing channel is defined as V$_{\betac}$. The formation mechanism of shortest chemical channel is schematically depicted in Fig. 1.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.69-77
• /
• 1996

The fatigue crack initiation behavior of plasma ion nitrided SACM645 steel was investigated through the rotary bending fatigue test and residual stress measurement by XRD. It was shown by XRD and EPMA that the plasma ion nitrided surface was composed of ${\gamma}^{\prime}(Fe_4N)$phase and ${\varepsilon}(Fe_{2-3}N)$phase, and that the nitrogen atoms existed in Fe matrix in diffusion layer. The OM, SEM and Auger spectroscopy showed that the depth of compound layer, mixed compound and diffusion layer, and diffusion layer was $8{\mu}m$, $30{\mu}m$ and $300{\mu}m$, respectively. However, the microhardness test showed that the depth of hardened layer was $500{\mu}m$. The tensile strength of the ion nitrided SACM645 was lower than that of the unnitrided SACM645, and the ion nitrided specimen was fractured without plastic deformation. The nitrided SACM645 showed much poorer low cycle fatigue properties than the unnitrided one. In rotary bending fatigue, the fatigue strength of the ion nitrided SACM645 was higher than that of the unnitrided specimen, and the fatigue crack initiation sites changed by applied fatigue stress levels. The XRD result showed that the ion nitrided SACM645 has the compressive residual stress from surface to $600{\mu}m$ deep and the tensile residual stress from $600{\mu}m$ to deeper site. It is thought that crack initiation takes place at the point where the total stress of residual stress and applied stress is maximum.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.259-264
• /
• 2010

In continuous hot dip galvanizing process, oxide formation on steel surface has an influence on Zn wetting. High strength automotive steel contains high amount of Si and Mn, where Si-Mn composite oxides such as $Mn_2SiO_4$ or $MnSiO_3$ covers the surface after annealing. Zn wetting depends on how the aluminothermia reaction can reduce the Mn-Si composite oxides and then form inhibition layer such as $Fe_2Al_5$ on the steel surface. The outward diffusion of metallic ions such as $Mn^{2+}$, $Si^{2+}$ in the steel matrix is very important factor for the formation of the surface oxides on the steel surface. The surface state and grain boundaries provide an important role for the diffusion and the surface oxide reactions. Some elements such as P, Sb, and B have a strong affinity for the interface precipitation, and it influence the diffusivity of metallic ions on grain boundaries. B oxide forms very rapildly on the steel surface during the annealing, and this promote complex oxides with $SiO_2$ or MnO. P has inter-reacted with other elements on the grain boundaries and influence the diffusion through on them. Small addition of Sb could suppress the decarburization from steel surface and retards the formation of internal and external selective oxides on the steel surface. Interface control by the trace elements such as Sb could be available to improve the Zn wettability during the hot dip galvanizing.

• Journal of Radiation Protection and Research
• /
• 제11권2호
• /
• pp.91-103
• /
• 1986

가압 경수로형 원자로에서 발생하는 증발기 저부 폐액에서의 Cs-137의 용출에 대한 실험을 수행하였다. IAEA에 의해 제안된 용출실험 방법에 근거를 두고, ANS 방법의 일부를 채용하였다. 용출에 영향을 미치는 여러 인자들로서, 시료채취방법, 양생온도, 양생기간, 용출액 온도, Vermiculite 첨가와 체적 대 표면적비 등이 고려되었다. 준 무한 격판(Semi-infinite Slab)에 대한 확산 모델은 4주간 경화된 시료의 실험치와 좋은 일치를 보이고 있다. 4주간 $25^{\circ}C$에서 양생된 시료의 표면적 확산 계수는 $1.20{\sim}1.47{\times}10^{-11}cm^2/sec$가 됨을 확인했으며, 이 계수에 의해 Cs-137의 장기 용출을 예측을 유한 격판 근사(Finite-slab Approximation) 방법을 이용하여 수행하였다. 또한, 계산 결과로부터 Cs-137은 용출 개시후 약 25년이 되면 초기량의 0.66%인 최대치가 되며 100년 후에는 약 0.25%가 잔류한다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1057-1062
• /
• 2001

We investigated the change of mechanical properties for TiNi shape memory alloy by heat treatment. 6061Al matrix composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum casting. TiNi alloy has the maximum tensile strength at 673K treated and there is no change of tensile strength and hardness at 448K treated. The composites, prepared by vacuum casting, showed good interface bonding by vacuum casting. It was about 3$\mu\textrm{m}$ of thickness of the diffusion layer. Tensile strength of the composite was in higher than that of 6061Al alloy as increased value of about 70MPa at room temperature and about 110MPa at 363K. We thought that the increase of the tensile strength at 363K was due to reverse transformation of the TiNi shape memory alloy.