• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.209-212
• /
• 2011

Selection of finishing materials in the design stage is an important management factor in terms of use safety and satisfaction, and work cost and process. However, selection of materials in the design stage is usually conducted without related guidelines or a set process, but depends on the experience of the architect or advice of materials company employees. Therefore, the aim of this study was to develop a finishing materials selection process that can be used by a architect. Materials selection related rules collected through interview with experts and five office building cases were used as knowledge. In addition, another aim of the study was to propose a prototype system interface for use in the field.

• 한국BIM학회 논문집
• /
• 제5권2호
• /
• pp.34-45
• /
• 2015

As buildings become larger and more complicated, construction costs have increased with a considerable effect on buildings' Life Cycle Cost (LCC). However, there has been little consideration on economic aspects in the selection of construction materials due to limited information on the materials and dependency in architects' experience and inefficiency in cost estimation, causing design changes, increase in maintenance cost, difficulty in budgeting, and decrease in building performance. To solve these problems, this study proposed a BIM-based material selection model which reflects the comprehensive economic efficiency of building materials. Our cost prediction model can estimates the material-related cost during the entire building life cycle. Furthermore, we implemented the proposed model in connection with BIM, which can analyze and compare LCC by material. Through the validation of the model, we could confirm the necessity of LCC-based material selection in comparison with the conventional cost-centered material selection.

• 한국도서관정보학회지
• /
• 제30권4호
• /
• pp.1-26
• /
• 1999

This study purposes to identify how the 'selection' of library materials shold be changed in the electronic environment to improve library services fundamentally. The study scrutinized the essence of selection, the relationship between selection and collection management, and the results of various studies to define the selection. The study implies: 1) the selection must be changed to the function providing users with assessment information of library materials, which helps the users access to entire scholarly information. 2) the assessment information could be input from different libraries and used by all users connected to the library network.

• 대한지역사회영양학회지
• /
• 제13권4호
• /
• pp.531-539
• /
• 2008

The purpose of this study is to examine how nutritionists, principals and parents evaluated the importance and priorities of different selection factors for food materials suppliers in an attempt to suggest how to ensure the best supplier choice, since the selection of the best supplier was mandatory for the successful TQM of school food services. This study especially aims to develop priority alternatives based on relative rather than absolute assignments on selection of suppliers for school food service materials. To apply AHP, the selection factors of a food materials suppliers were grouped into five categories, which included quality, service, reliability, hygiene and price. And the five categories involved 28 elements. As the result, quality was considered most crucial on the whole, followed by service, reliability, hygiene and price; and food labeling in the category of quality evaluated as that of first priority in the totality evaluation elements.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.87-100
• /
• 2012

The process of selecting a repair material is a typical one of multi-criteria decision-making (MCDM) problems. In this study Analytical Hierarch Process was applied to solve this MCDM problem. Many factors affecting a process to select an optimal repair material can be classified into quantitative and qualitative requirements and this study handled only quantitative items. Quantitative requirements in the optimal selection model for repair material were divided into two parts, namely, the required chemical performance and the required physical performance. The former is composed of alkali-resistance, chloride permeability and electrical resistivity. The latter is composed of compressive strength, tensile strength, adhesive strength, drying shrinkage, elasticity and thermal expansion. The result of the study shows that this method is the useful and rational engineering approach in the problem concerning the selection of one out of many candidate repair materials even if this study was limited to repair material only for chloride-deteriorated concrete.

• 한국건설관리학회논문집
• /
• 제9권4호
• /
• pp.84-91
• /
• 2008

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기 질에 대한 인식을 새롭게 하고 있다. 이러한 시대적 흐름에 발맞추어 최근 신축되거나 리모델링 되는 공동주택에는 친환경 실내마감재료가 적용되고 있다. 하지만, 친환경 실내 마감재료는 일반재료에 비해 그 가격이 고가이며, 분양가 상승을 야기한다. 또한 친환경 마감재료 적용으로 인한 분양가 상승은 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부 재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.953-956
• /
• 2007

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기질에 대한 인식을 새롭게 하고 있다. 또한, 최근의 공동주택의 실내 마감재료에 친환경 소재가 적용되고 있으나 그 가격이 고가이므로 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.63-70
• /
• 2005

It has been used so many kinds of architectural materials and interior products in current building construction, and use of composite architectural materials is increasing with the development of chemical technology. As the green architecture has become the center of public interest, much effort is conducted in advanced countries on the LCA point of view, such as restriction of architectural materials that emitting pollution substances, developing of Non-Toxic architectural materials, and recycling of used materials, etc. with the cooperation of related organizations, material manufacture companies, and construction companies. Because the kinds of materials to be used in building constructions are so various, there might be some possibility of personal and subjective choice at the time of materials selection resulting the missing the requirements of building components and the choice of harmful materials to human. One way to resolve the material problem is to present the green architectural materials which coincide with the quality performance at service and not harmful to man and nature. At this point of view, this study aims to develop the material classification model by investigating the major labelling system about green architectural materials in both domestic and abroad and to implement an efficient material selection system by making a powerful database of environmental standard and quality basis of building requirements.

• 한국결정성장학회지
• /
• 제29권1호
• /
• pp.39-44
• /
• 2019

본 연구는 제품 개발에 있어 소재 선정은 수요자 중심의 니즈를 최대한 반영 할 수 있어야 한다는 중요성에 대하여, 'RE_Double Diamond' 디자인 프로세스를 새롭게 제안하였다. 또한, 기존 더블다이아몬드 방법론 중 공급자 중심의 2차 이해관계자 맵 프로세스를 적용하였으며, 시각화 중심의 정보구축을 포함하여 디자이너-엔지니어 간의 커뮤니케이션을 통한 소재의 선정에 대하여 보고하고자 한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.19-23
• /
• 2022

We have been developing a magnetic separation device that can be used in low magnetic fields for paramagnetic materials. Magnetic separation of paramagnetic particles with a small particle size is desired for volume reduction of contaminated soil in Fukushima or separation of iron scale from water supply system in power plants. However, the implementation of the system has been difficult due to the needed magnetic fields is high for paramagnetic materials. This is because there was a problem in installing such a magnet in the site. Therefore, we have developed a magnetic separation system that combines a selection tube and magnetic separation that can separate small sized paramagnetic particles in a low magnetic field. The selection tube is a technique for classifying the suspended particles by utilizing the phenomenon that the suspended particles come to rest when the gravity acting on the particles and the drag force are balanced when the suspension is flowed upward. In the balanced condition, they can be captured with even small magnetic forces. In this study, we calculated the particle size of paramagnetic particles trapped in a selection tube in a high gradient magnetic field. As a result, the combination of the selection tube and HGMS (High Gradient Magnetic Separation-system) can separate small sized paramagnetic particles under low magnetic field with high efficiency, and this paper shows its potential application.