• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.290-294
• /
• 2000

Between multiple components of the building, materials have a direct impact on the environment. For many researchers have proposed guidelines for green design materials. However they didnt provide concrete criteria for selecting materials for selecting materials for achieving green design. From the perspective of this point, this paper proposes. Performance information expressed numerically is the most important factor. The purpose of this study is to provide the specific information about the performance of materials that has been ranked quantitatively. The performance information can be utilited in selecting materials for green design.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.160.1-160.1
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.230-233
• /
• 2003

New photopolymers were designed and prepared using the photosensitive polymer binders. The photochemical reaction of the photosensitive polymer binder was studied by virtue of UV absorption and infrared spectroscopy. The holographic gratings were successfully fabricated in these photopolymer film samples by conventional optical interference method. We also investigated the effect of photocrosslink in the polymer binder on the diffraction behavior of the photopolymer. The dynamic behaviors of the grating formation were studied with the change of exposure intensity in terms of the diffraction efficiency. Particularly, we focused our efforts to observe the variation of the diffraction efficiency during post UV curing process.

• Journal of Information Science Theory and Practice
• /
• v.9 no.4
• /
• pp.1-14
• /
• 2021

Library communities face many problems and limitations in describing alternative format materials based on the traditional MAchine Readable Cataloging (MARC) structure. To address these problems, this research proposes an XML-based descriptive metadata framework that establishes general but fundamental bibliographic aspects of various alternative format materials by providing core elements that are essential in describing these materials. Different from existing bibliographic structures, the proposed metadata framework can represent a fundamental descriptive structure by establishing four upper-level categories, 17 core elements, and 10 sub-elements in a hierarchical structure optimized to alternative format materials. By using this principal descriptive structure, the proposed metadata framework can guide different institutions in the creation of bibliographic records for these materials in a consistent way. It is also expected to address the difficulties in describing alternative format materials in library communities and enhance the information accessibility of individuals with various types of disabilities. In addition, the proposed metadata framework is an alternative approach which functions as a mediator between heterogeneous characteristics of alternative format materials and the existing bibliographic structures in library communities.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.2
• /
• pp.94-100
• /
• 2008

The implant prototypes with various porosities were fabricated by Spark Plasma Sintering of atomized spherical titanium balls. The interface was observed by optical microscope. Sintering temperature and holding time were selected at the point of big change of Z-axis ratio during sintering. These experiments show that Spark Plasma Sintering of spherical titanium balls can be efficiently used to produce implants surfaced with titanium balls with various porosities in a short time less than 120 seconds by manipulating the current condition such as z-axis, temperature and balls size.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.1
• /
• pp.209-220
• /
• 2009

The purpose of this study is to investigate the information behavior of the junior high school students in the public library and to find the effectiveness of the behavior analysis using a cognitive work analysis(CWA). Data was collected through a dept interview and an observation method. Results show that the students had four constraints when they searched materials for reports: relevant materials for reports, limitation of materials, opening hours, use possibility. There are three behavior types. A type is that students find materials on the shelf through searching an online catalog, then make a report using reading the materials. B type is that students find materials on the shelf and check out the materials. C type is that students find materials and check out them by library staff help. CWA can be used for the information behavior research on the library space. CWA can, however, apply for space redesign when various researches would be conducted about the information behavior.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.115-119
• /
• 2011

Si Nanowire (NW) field effect transistors (FETs) were fabricated on hard Si and flexible polyimide (PI) substrates, and their electrical characteristics were compared. Si NWs used as channels were synthesized by electroless etching method at low temperature, and these NWs were refined using a centrifugation method to get the NWs to have an optimal diameter and length for FETs. The gate insulator was poly(4-vinylphenol) (PVP), prepared using a spin-coating method on the PI substrate. Gold was used as electrodes whose gap was 8 ${\mu}m$. These gold electrodes were deposited using a thermal evaporator. Current-voltage (I-V) characteristics of the device were measured using a semiconductor analyzer, HP-4145B. The electrical properties of the device were characterized through hole mobility, $I_{on}/I_{off}$ ratio and threshold voltage. The results showed that the electrical properties of the TFTs on PVP were similar to those of TFTs on $SiO_2$. The bending durability of SiNWs TFTs on PI substrate was also studied with increasing bending times. The results showed that the electrical properties were maintained until the sample was folded about 500 times. But, after more than 1000 bending tests, drain current showed a rapid decrease due to the defects caused by the roughness of the surface of the Si NWs and mismatches of the Si NWs with electrodes.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.51-54
• /
• 2010

Transparent conductive films of single wall carbon nanotube (SWCNT) were prepared by spray coating method. The effect of acid treatment on the SWCNT films was investigated. The field emission scanning electron microscope (FESEM) shows that acid treatment can remove dispersing agent. The electrical and optical properties of acid-treated films were enhanced compared with those of as deposited SWCNT films. Nitric acid ($HNO_3$), sulfuric acid ($H_2SO_4$), nitric acid:sulfuric acid (3:1) were used for post treatment. Although all solutions reduced sheet resistance of CNT films, nitric acid can improve electrical characteristics efficiently. During acid treatment, transmittance was increased continuously with time. But the sheet resistance was decreased for the first 20 minutes and then increased again. Post-treated SWCNT films were transparent (85%) in the visible range with sheet resistance of about $162{\Omega}/sq$. In this paper we discuss simple fabrication, which is suitable for different types of large-scale substrates and simple processes to improve properties of SWCNT films.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.256-262
• /
• 2010

bone grafting is indicated in the case of bony defects and is classified into autograft, allograft, and xenograft. Synthetic bone graft is contrasted with these three categories in that it has a different donor source. Autograft is most prominent as it is known as a gold standard of all grafting procedures. Its principles and practices are well established via accumulated informations and clinical experiences, which imposes no regulations or restrictions in its clinical use. On the other hand, other bone graft procedures are under tight control for the safety and effectiveness of each product. Food and Drug Administration of the United States has a system in which the information on the approvals and clearances of bone graft materials on their internet homepage. All the bone graft materials that are under the regulations of the United States are classified into the category of medical devices, which includes allogenic bone, xenogenic bone, and synthetic bone graft materials. Each bone graft material has its own indication and the FDA approvals and clearances of medical devices contain the item of "intended use" to specify the indications of each bone graft materials. US dentists, as users of the specific bone graft materials, are provided with adequate information on the approved materials they are to utilize. As an user of these materials, Korean dentists are less provided with the information on the bone graft materials they want to use. Medical providers of the bone graft materials have to be able to provide their users with the essential information such as the intended use of the regulatory approval. Dentists must also be active in gathering informations on the material of their interest, and the system must be built in which both of the medical providers and users of bone graft materials can be satisfied in providing and getting the information, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1313-1316
• /
• 2005

In the present paper, it was investigated that adhesion layer on gate insulator could affect the electrical characteristics for the organic thin film transistors (OTFTs). The polyimide (PI) as organic adhesion layer was fabricated by using the vapor deposition polymerization (VDP) processing . It was found that electrical characteristics improved comparing OTFTs using adhesion layer to another. We researched adhesion layer as a function of thickness. For inverted-staggered top contact structure, field effect mobility, threshold voltage, and on-off current ratio of OTFTs using adhesion layer of PI 15 nm thickness on the gate insulator with a thickness of 0.2 ${\mu}m$ were about 0.5 $cm^2/Vs$, -0.8 V, and $10^6$, respectively.