• 한국지반공학회논문집
• /
• 제36권4호
• /
• pp.31-39
• /
• 2020

지진 하중 하에서 필댐의 거동은 필댐 구성 재료의 전단파 속도(또는 전단 탄성계수) 분포에 많은 영향을 받는다. 일반적으로 필댐의 전단파 속도 분포는 전단파 속도 주상도를 통해 나타낼 수 있다. 이때 댐 구성 재료의 전단파 속도는 일반적으로 필댐 내부에서 공간에 따른 변동성을 가지며, 댐에서 허용되는 한정된 수의 실험에서는 이러한 재료 물성치 공간 변동성을 결정론적으로 규명할 수 없다. 따라서 실험에서 얻어진 전단파 속도 주상도는 불확실성을 가지게 되며, 재료 물성치의 불확실성은 해석결과에 불확실성을 야기하게 된다. 신뢰성 기반 해석은 이러한 재료 물성치 불확실성에 의한 해석결과의 영향을 평가 할 수 있다. 신뢰성 기반 해석에서는 변동계수를 통해 재료 물성치의 불확실성을 평가하고, 이러한 불확실성에 의한 영향을 해석에 반영할 수 있다. 본 연구에서는 국내 필댐 심벽부와 사력부 구성 재료의 전단파 속도 변동계수(COV, Coefficient Of Variation)를 결정하였다. 이를 위해 국내 필댐 심벽부와 사력부에서 표면파 시험을 통해 결정된 전단파 속도 주상도들에 대해 Hwang and Park(2013)에 의해 개발된 랜덤 전단파 속도 주상도 생성 기법을 적용하여 국내 필댐 심벽부와 사력부에 존재 가능한 전단파 속도 주상도 600개를 생성하고 이에 대한 통계처리를 통하여 필댐 심벽부와 사력부의 깊이별 전단파 속도 변동계수를 결정하였다.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.473-494
• /
• 2015

A graded harmonic finite element formulation based on three-dimensional elasticity theory is developed for the structural analysis of 2D functionally graded axisymmetric structures. The mechanical properties of the axisymmetric solid structures composed of two different metals and ceramics are assumed to vary in radial and axial directions according to power law variations as a function of the volume fractions of the constituents. The material properties of the graded element are calculated at the integration points. Effects of material distribution profile on the static deformation, natural frequency and dynamic response analyses of particular axisymmetric solid structures are investigated by changing the power law exponents. It is observed that the displacements, stresses and natural frequencies are severely affected by the variation of axial and radial power law exponents. Good accuracy is obtained with fewer elements in the present study since Fourier series expansion eliminates the need of finite element mesh in circumferential direction and continuous material property distribution within the elements improves accuracy without refining the mesh size in axial and radial directions.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.22-26
• /
• 2010

Material degradation should be considered to assess integrity and residual life of high temperature equipments. However, the property data reflecting degradation are not sufficient for practical use. In this study, mechanical properties of 1Cr-1Mo-0.25V casting steel generally used for turbine casing were measured and variation of microstructure was observed. Degradation was simulated by isothermal heat treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.268-268
• /
• 2010

AC anodizing on aluminum foil was investigated by the variation of AC voltage and frequency. The voltage and frequency were applied in the range of approximately 40~200V, 0~400Hz. The porous alumina film was formed and the growth rate of oxide film is increased with frequency. The structural property was analyzed by SEM and XRD. SEM results show the approximate relation between frequency, voltage and growth rate. The AC voltage effect on the structural modulation of porous alumina indicates that AC anodizing is useful for the application to nanocapacitor material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1[GHz] - 2[GHz] and temperature range of $25[^{\circ}C]$ - $85[^{\circ}C]$. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals though these lines. The loss factor of these materials could be obtained with the dielectric constant and the attenuation of the microstrip lines.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.773-777
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1 ~ 2[㎓] and temperature range of 25~ 85[>$^{\circ}C$]. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals through these lines. The loss factor of glass-epoxy and teflon could by calculated with the measured dielectric constant and the attenuation. From the experiment, the glass-epoxy was more influenced by temperature and frequency than teflon. The average dielectric constants of glass-epoxy and teflon within the measured frequency range are 4.48 and 2.18, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.173-176
• /
• 1999

Crosslinked Decree is an important 7actor to determine dielectric property of crosslinked polyethylene(XLPE) used for the insulation material in Power cables. Recently, though it is necessary to investigate electrical properties according to crosslinked degree as a Part of the whose characterization of cable. it is not examined closely. In this study. crosslinked degree of samples were measured according to temperature and holding time of crosslinking. electrical tree characteristics of these characteristics of these samples were analyzed by crosslinked degree and applied temperature that was chanced from normal temperature to operating temperature of power cables. As a result. when the crosslinked degree was low, dielectric properties were decreased and influence of temperature was increased. but the crosslinked degrees were high, initiation voltages of treeing were increased and dielectric properties were improved. It is proved that the optimum crosslinked degree was one of most important factor for aging time and residual lifetime of Power cable.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2005년도 춘계학술논문발표회 논문집
• /
• pp.293-298
• /
• 2005

Insulator is being used for material of railroad vehicles as a barrier of heat and noise. But it shows various fire properties in case of fire. In this study, we compared smoke density(Ds) values of rubber foams with the different thickness of glass fiber cross-Al foil according to the standard of ASTM E 662. The result showed that the insulator and barrier property played an important role in decreasing the value of smoke density

• 한국통신학회논문지
• /
• 제35권11A호
• /
• pp.1091-1096
• /
• 2010

Stiction in microelectromechanical systems (MEMS) has been a major failure mechanism. Especially, in RF MEMS switches, moving parts often suffered in-use and release related stiction problems. Some materials and methods have been used to prevent this problem. Diamond-like carbon (DLC) has not only been used as a protective material owing to its good mechanical properties but also has been used as a hydrophobic material. Its properties could be controlled by post annealing treatment in various conditions. We synthesized DLC films using a radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gas. Then, the change of the hydrophobic property of the films was investigated undervarious annealing temperatures in nitrogen and in oxygen ambient. The films, that were annealed above $700^{\circ}C$ in nitrogen ambient, showed a high contact angle of water (> $90^{\circ}$) even though their mechanical property was sacrificed to some degree. The structural variation and the changes of the hydrophobic and mechanical properties of the DLC films were analyzed by Raman spectrum, contact angle measurement, surface profiler, and a nanoindentation test.

• 한국지반공학회논문집
• /
• 제30권5호
• /
• pp.17-24
• /
• 2014

본 논문에서는 국내 CFRD 사력존을 위한 1차원 전단파 속도 분포를 제안하였다. 이를 위해 선정된 3개의 댐 사면 8곳에서 수행된 표면파 시험 결과를 사용하였다. 다양한 원인에 의해 존재 가능한 사력존 물성치 공간 변동성에 의한 표면파 시험 결과의 불확실성을 고려하고자 시험에서 얻어진 개별 주상도들을 하모닉 웨이브릿 변환을 통해 공간-파수 영역에서 분석하였다. 이를 통해 전단파 속도 주상도에 존재하는 불확실성을 평가하였다. 논문에서 제안된 방법을 통해 사력존에 존재 가능한 1차원 전단파 속도 분포들을 생성하였으며, 생성된 1차원 전단파 속도 분포들을 사용하여 물성치 공간 변동성에 의한 불확실성이 고려된 국내 CFRD 사력존의 1차원 전단파 속도 분포를 결정하였다.