• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.121-125
• /
• 2009

The recycling of waste concrete is increasing for the environment protection and the shortage of aggregate according to the large scale construction project in Korea. The more manufacturing high quality recycled aggregate is produced, the more waste concrete powder generated from the manufacture process of recycled aggregate, and the consideration about the recycling of waste concrete powder is need. Waste concrete powder was used for the partial replacement of silica powder, which is a main raw material for the manufacture of autoclave foamed concrete. According to the results of research, the slurry density, flow, compressive strength mainly depend on the replacement ratio of particle size and waste concrete powder. At the SEM analysis, the more high-waste concrete powder was the less there are generated tobermorite. But we conclude that it is possible to replace WCP as silica source in the manufacture of the lightweight foamed concrete.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2387-2393
• /
• 2020

In this study, a gradient material for shielding neutrons and gamma rays was developed, which consists of epoxy resin, boron carbide (B₄C), lead (Pb) and a little graphene oxide. It aims light weight and compact, which will be applied on the transportable nuclear reactor. The material is made up of sixteen layers, and the thickness and components of each layer were designed by genetic algorithm (GA) combined with Monte Carlo N Particle Transport (MCNP). In the experiment, the viscosities of the epoxy at different temperatures were tested, and the settlement regularity of Pb particles and B₄C particles in the epoxy was simulated by matlab software. The material was manufactured at 25 ℃, the Pb C and O elements of which were also tested, and the result was compared with the outcome of the simulation. Finally, the material's shielding performance was simulated by MCNP and compared with the uniformity material's. The result shows that the shielding performance of gradient material is more effective than that of the uniformity material, and the difference is most noticeable when the materials are 30 cm thick.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.98-104
• /
• 1999

The crank shafts need anti-corrosion materials. So STS 304 is the essential material to manufacture this shaft. However, it costs more to manufacture the shafts by using only STS 304 than welding of STS 304 to other carbon steels. And it has been difficult to weld this sort of dissimilar materials. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing. But by the friction welding technique, it will be able to be made without such problems. Then, this study aimed not only to develop the optimization of dissimilar friction welding of crank shafts steels of STS 304, SM35C, but also to develop the application technique of the acoustic emission to accomplish in-process real-time quality(such as tensile) evaluation during friction welding of the shafts by the AE technique.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.121-130
• /
• 1998

In recent years, a number of metal machine parts, in the field of the car manufactures and electronic goods for home, have been replaced by nylon-6 in order to weight, cost, and a period of process of manufacture. It's because nylon-6 materials as an industrial material have higher economical and productive advantage than the metalic ones. However, in domestic injection manufactures, there are few data on fiber glass synthetic on nylon-6. It is said that plastic in process of manufacture using the same injection materials make their results different in large scale according to fiber glass synthetic rate conditions. In this study, we have studied effects of the glass fiber synthetic rate on the characteristics of fatigue failure for nylon-6.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.52-58
• /
• 2006

Coffee chaff for manufacturing of the 6 mm thick cement-bonded boards was obtained from a coffee processing industry at Omuo-Ekiti, in Ekiti State, Nigeria. Boards were produced with three levels of cement to coffee chaff ratio of 1.5:1, 2.5:1 and 3.5:1; and at three levels of mixing curing reagent of 2.0%, 2.5% and 3.0%. Three dimensional properties of thickness swelling (TS), water absorption (WA) and linear expansion (LE) were investigated after 48 hours immersion in water. The mean values obtained for TS, WA and LE ranged from 0.46% to 1.47%, from 11.52% to 24.00%, from 0.19% to 0.35%, respectively. The most dimensionally stable boards were produced at the highest mixing levels of curing reagent and cement to coffee chaff ratio of 3.0% and 3.5:1, respectively. The coffee chaff is suitable as raw material for the manufacture of cement-bonded composites and it would be able to stimulate and activate the use of other agro-byproducts for the manufacture of value-added panels.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.57-65
• /
• 2016

This paper was analyzed the characteristics of piezoelectric inkjet print head using finite element method(FEM). It showed the bending node driving of piezoelectric and relation theory principle consider piezoelectric material characteristics and ink characteristics. From such result we were had the piezoelectric head design and manufacture. It got a this head characteristics through experiment, we confirmed that proper voltage control is possible to through ink drop control experiment of piezoelectric print head. This paper was obtained the suitable ink jetting characteristics that manufacture the control circuit and piezoelectric inkjet print head. This practice product was applied to improvement of PCB electric circuit pattern by etching resist ink that PCB manufactured to complex process over traditional 6 stages can be simpled to 1 stage by inkjet printing technology.

• International Journal of Advanced Culture Technology
• /
• v.2 no.1
• /
• pp.30-32
• /
• 2014

3D printing technology polymeric material or plastic and metallic powder to suit the drafting of additive manufacturing would gradually products soars. 3D printing technologyapplication of a wide variety of industrial sectors. 3D printing technology enables raw materials consumption is less, the supply chain are shorter depending on the load and reduce the use of fossil fuels.Emergence of 3D printing technology so called the third industrial revolution in ICT market, quickly spread worldwide.In the future, 3D printing technology is simply beyond bio-technology, Nano-engineering, the manufacture of the product, incorporating a variety of technologies to improve the quality of life of human beings have played an important role will be.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.816-819
• /
• 2000

Recently the styrofoam has been used fur material of press die pattern. The object of this research is to develope an automated laser system for manufacture of press die pattern which depends chiefly on handwork during its process. After converting 3-D CAD model into cross-sectional shape information, the unnecessary part of the section is vapored away by laser. The depth and width of cut are mainly under the control of laser power and beam feed rate. The optimum manufacturing conditions are obtained by preliminary experiments. It is necessary fur precise styrofoam pattern manufacturing to develope laser system which has sufficient motion accuracy and program or beam path generation and automatic control of this system.

• The Research Journal of the Costume Culture
• /
• v.16 no.2
• /
• pp.319-332
• /
• 2008

The purpose of this study is to analyze Kapa, the traditional bark cloth of Hawaii, including materials, method of manufacture, and colors and patterns, and to show the characteristics of Kapa to identify traditional culture of Hawaii as well as the unique culture of cloth of Hawaii in tropical area. The method of study is qualitative research using documentary records about Kapa. The cultivated Wauke proved to be the best material for bark cloth in Hawaii. The manufacture of Kapa was made by beating divided into two stages. The dyes for coloring were very different due to the existence of various plants. Indigenous Hawaiians showed the unique textures like grooving and watermarks, and the various designs in their Kapa. The characteristics of Hawaiian Kapa appear the symbol of some colors, the preference of geometrical patterns, the various uses of Kapa, and perfumed Kapa. Through these characteristics of Hawaiian Kapa, the traditional culture of indigenous Hawaiian can be understood very well. This study will help people understand indigenous bark cloth of tropical areas including Hawaii.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.130-131
• /
• 2017

The combined waterproofing technique, which forms the waterproofing layer of two or more substances, is characterized by forming a waterproof layer, which is characterized by the formation of waterproof layers and the thickness of the waterproofing layer is inherently formed. In this study, it is intended to verify the integrity of the material through the manufacture of materials for special purpose waterproofing methods, primarily for the manufacture of composite waterproofing materials and composite waterproofing methods using cement materials and materials.