• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.71-72
• /
• 2022

In this paper, the performance evaluation of the vibration damping ratio according to the polymer mixing ratio of the polymer modified mortar used as the floor finishing material of the apartment building structure was evaluated. To compare the vibration damping rate, ordinary potland cement (OPC) mortar and polymer modified mortar (PMM) were prepared. In addition, the mixed polymer was mixed with Styrene Butadiene Rubber (SBR) liquid polymer with a solid content of about 49%. Accordingly, the W/C of the test specimen was adjusted and compounded, and the experiment was conducted by mixing 5 types of the test specimen: OPC-60, PMM-5%, PMM-10%, PMM-15%, and PMM-20%. In addition, in order to adjust the W/C of the specimen, the fluidity of each specimen was set as 210 (±5) mm. The specimens measured density and flow in fresh mortar and after curing for 28 days, flexural strength, compressive strength and ultrasonic pulse were measured. The attenuation rate was shown. The experimental results showed that the density increased according to the mixing of the polymer, the flexural strength increased as the mixing rate of the polymer increased, and the compressive strength was decreased. In addition, it was shown that the vibration damping rate increases with the increase in the amount of polymer incorporated.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.119-125
• /
• 2020

에폭시 계열의 합성수지와 골재를 혼합함으로써 진동저감 성능을 크게 증가시킨 고감쇠 콘크리트에 대한 연구가 활발히 진행되고 있는데, 이러한 폴리머 혼입 고감쇠 콘크리트는 배합 시, 시멘트와 물을 사용하지 않으므로, 일반 콘크리트에 비해 경화시간이 매우 짧고, 물리적 특성 및 동특성 등이 매우 우수하여, 층간소음 및 진동 저감이 요구되는 건축구조물에의 폭넓은 활용이 기대되고 있다. 한편, 폴리머 혼입 고감쇠 콘크리트의 활용성을 넓히기 위한 방안으로, 보강재 분야에 대한 연구가 다양하게 진행되어 왔으나, 폴리머 콘크리트가 일반 콘크리트 및 기존 방진보강재를 완전히 대체하기 위해서는 물리적 특성, 동적 물성, 생산성 및 현장 적용성 등을 고려하여 진동저감 성능에 대한 전반적인 검토가 필요한 실정이다. 본 연구에서는 폴리머 콘크리트의 에폭시 혼입비율별 물리적, 동적 특성을 일반 콘크리트와 비교한 결과, 탄성계수는 비슷한 반면, 압축, 인장, 휨강도가 상당히 우수한 결과를 보였으며, 특히 인장강도는 4~10배 이상 큰 차이를 보였으며, 주파수 응답함수와 감쇠비를 Modal 시험과 유한요소해석 모델을 통해 도출하여 검토한 결과, 폴리머 콘크리트의 동적 강성이 일반 콘크리트 보다 20% 크게 나타났고, 감쇠비는 약 3배 정도 높은 것으로 나타났다.

• 한국재난정보학회 논문집
• /
• 제17권4호
• /
• pp.829-838
• /
• 2021

연구목적: 경제적, 기술적 이유로 내진설계가 되지 않은 기존의 콘크리트 구조물이나 내진설계나 면진 시공이 어려운 저층의 콘크리트 구조물이 지진력을 받을 때, 액체가 아닌 공기를 이용한 감쇠장치인 공기 스프링 댐퍼 시스템(Air Spring Damper System, ASDS)을 제안하고 한다. 연구방법: 자유진동의 운동방정식에서 감쇠력(Damping Force) 항인 $f_D=c{\dot{v}}$에 대한 연구를 수행하고자 하며, 이 장치가 댐퍼로서의 감쇠능력을 갖는 지에 대하여 실험적, 이론적으로 분석하며 현장적용에 대한 가능성 여부를 검토 한다. 연구결과: 에어 댐퍼 시스템은 제작 및 시공이 간편하고 형상, 크기, 재료 등에 제한이 적어서 댐퍼 의 개수가 증가하더라도 강재 이력형 댐퍼에 비하여 월등히 경제적이라 사료된다. 결론: 공기 스프링 댐 퍼 시스템에서는 감쇠비를향상을 위하여 공기 입출용 구멍의 직경을 줄이는 것이 필수이지만, 직경이 어느 이하의 크기로 줄어들면 공기의 압축성에 대한 고려가 필요하므로 공기 입출용 구멍의 직경과 공 기 압축성의 상관성에 대하여 추가적인 연구가 필요하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.274-281
• /
• 2004

In this paper, the existing Stokoe type torsional shear equipment is modified to saturate the specimen and measure excess pore water pressure during undrained testing. Two types of sands, Geumgang and Toyoura sands, were collected and TS tests were performed at various densities drainage conditions, and confining pressures. The cyclic threshold shearing strains were estimated based on the variations of shear modulus, material damping ratio and pore pressures with loading cycles. The effects of relative density, confining pressure, and drainage condition on the cyclic threshold shearing strains were investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.883-886
• /
• 2001

The mechanical properties such as the Young's modulus, damping ratio, vibration mode and hardness of the disk materials heat-treated under various conditions are measured, and the relations between there properties and the cutting characteristics such as early tip fracture are examined. The results obtained from this study are as follows. The circular saw with the V-Cr added disk has higher young's modulus and damping ratio than the saw with STC5 disk, preventing the early fracture of tungsten carbide due to the above properties. The circular saw with the disk which is subjected to the heat treatment at the quenching temperature of $830^{\circ}C$ and at the temperature of $550^{\circ}C$ have the best tool life and surface roughness.

• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.34-41
• /
• 2000

The analysis of static and dynamic characteristics of reinforced roadbed materials was performed through model and laboratory tests. The strength characteristic of reinforced roadbed materials such as HMS-25 and soil were investigated through the unconfined axial compression test, the model soil box test and the combined resonant column and torsional shear test. The unconfined axial compression strength of HMS-25 shows a steady increasement in strength due to the chemical hardening reaction between HMS-25 and water. The result of model soil box test reveals that railroad roadbed of HMS-25 is better than that of soil in several aspects, such as, bearing capacity and settlement. The combined resonant column and torsional shear test result indicates that shear modulus of HMS-25 and soil increase with the power of 0.5 to the confining pressure and linear relationship to normalized shear modulus and damping ratio.

• 한국농공학회논문집
• /
• 제49권4호
• /
• pp.43-49
• /
• 2007

The reinforced concrete slab is one of main structure members in the construction industry sector. However, most of researches regarding to RC slabs have been focused on two-dimensional Mindlin-type plate element on the basis of laminated plate theory since three-dimensional solid element has a lot of difficulties in finite element formulation and costs in CPU time. In reality, the RC slabs are subjected to dynamic loads like a heavy traffic vehicle load, and thus should insure the safety from the static load as well as dynamic load. Once we can estimate the dynamic behaviour of RC slabs exactly, it will be very helpful for design of it. In this study, the 20-node solid element has been used to analyze the dynamic characteristics of RC slabs with clamped edges. The elasto-visco plastic model for material non-linearity and the smeared crack model have been adopted in the finite element formulation. The applicability of the proposed finite element has been tested for dynamic behaviour of RC slabs with respect to characteristics of concrete materials in terms of cracking stress, crushing strain, fracture energy and Poisson's ratio. The effect on dynamic behaviour is dependent on not crushing strain but cracking stress, fracture energy and Poisson's ratio. In addition to this, it is shown the damping phenomenon of RC slabs has been identified from the numerical results by using Rayleigh damping.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.185-197
• /
• 2021

Throughout the previous years, many efforts focused on incorporating non-biodegradable wastes as a partial replacement and sustainable alternative for natural aggregates in cement-based materials. Currently, rubberized concrete is considered one of the most important green concrete materials produced by replacing natural aggregates with rubber particles from old tires in a concrete mixture. The main benefits of this material, in addition to its importance in sustainability and waste management, comes from the ability of rubber to considerably damp vibrations, which, when used in reinforced concrete structures, can significantly enhance its energy dissipation and vibration behavior. Nowadays, the literature has many experimental findings that provide an interesting view of rubberized concrete's dynamic behavior. On the other hand, it still lacks research that collects, interprets, and numerically investigates these findings to provide some correlations and construct reliable prediction models for rubberized concrete's dynamic properties. Therefore, this study is intended to propose prediction approaches for the dynamic properties of rubberized concrete. As a part of the study, multiple linear regression and artificial neural networks will be used to create prediction models for dynamic modulus of elasticity, damping ratio, and natural frequency.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2502-2512
• /
• 2000

Truss structures are widely used in many space structures, such as large antenna systems, space stations, precision segmented telescopes because they are light in weight and amenable in assembly or deployment. But, due to the low damping capacity, they remain excited for a long time once disturbed. These structural vibrations can reduce life of the structures and cause unstable dynamic characteristics. In this research, vibration suppression experiment has carried out with a three-dimensional 15-member truss structure using two piezoelectric actuators. Piezoelectric actuators which consist of stacks of thin piezoelectric material disks are directly inserted to the truss structure collocated with the strain sensors. Each actuator is controlled digitally in decentralized manner, based on local integral and proportional feedback. The optimal positions of the actuators are determined by the modal damping ratio and the control force. Numerical simulation has carried out to determine optimal position of each actuator.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.332-336
• /
• 2008

A pulsation damper is usually mounted on the fuel rail to diminish undesirable noise in the vehicle cabin room. However, pulsation dampers are quite expensive. Therefore, several studies have focused on reducing fuel pressure pulsations by increasing the self-damping characteristics of the fuel rail. This paper is a basic study in the development of a fuel rail that can reduce pulsations via a self-damping effect. In this study, the pressure pulsation characteristics were of investigated with respect to the aspect ratio of the cross section, wall thickness, and fuel rail material through oil hammer simulations. An oil hammer simulation was performed in advance to simulate the pressure pulsations at the resonant speed, which is a time-saving way. The pressure pulsation peak of fuel rail was observed to rise as the injection period increases. Increase of the aspect ratio and decrease of the wall thickness can reduce the pressure pulsation efficiently.