• Composites Research
• /
• v.16 no.5
• /
• pp.39-44
• /
• 2003

Embedding viscoelastic-damping materials into composites can greatly increase the damping properties of composite structures. Usually viscoelastic-damping materials behave isotropically so that their damping properties are the same in all directions. In these days, there is a desire to develop viscoelastic-damping materials that behave orthotropically so that damping properties vary with material orientation. These orthotropic damping materials can be made by embedding rows of thin wires within the viscoelastic materials. These wires add significant directional stiffness to the damping materials. where the stiffness variation with wire orientation follows classical lamination theory. In this paper, the loss factor of composite laminate was evaluated based on Ni and Adams' theory. To investigate the effect of directional damping material, the low-velociy impact response analysis was also performed. The present analysis results show that directional damping material has a great influence on vibration and damping characteristic of composite laminate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.160-161
• /
• 2013

Recently, the enviroment problem is serious due to the global warming phenomenon because of the greenhouse gas exhaustion. In addition, the effort to reduce the problem in the situation where the severity of the destruction of environment because of the indiscriminate picking of the that is the raw material of the cement, Accordingly, in the interior of a country, the industrial site using the artificial stone instead of the natural stone is increased. Thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. limestone and aggregate and exhaustion of resource are emphasized is continued. In this research, the fly ash and waste porcelain is applied to the magnesia phosphate composite (MPC) and the characteristic of the artificial stone according to it tries to be looked into.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.73-82
• /
• 2006

Nowadays, the general stripping work of form has brought some problems; increase of total constructing cost resulted from the man-dependent form work procedure and environmental issues by wasting the debonded form. In this study, to effectively reduce unnecessary cost and resolve the environmental problems caused by these kinds of reason, a permanent form method using stainless steel fiber was introduced then its material and structural characteristics were evaluated. In the case of material characteristic, the permanent form had a good ductile behavior in the result of flexural test of the permanent form panel and pull-out test of insert bolt which is installed in the permanent form and perfect bonding capacity with a field concrete. In the case of structural characteristic, compressive and tensile behavior of the permanent form was evaluated. It also showed a good structural behavior in the view of load-deflection relationship, crack patterns and additional strengthening effect.

• Korean Institute of Interior Design Journal
• /
• v.19 no.4
• /
• pp.58-65
• /
• 2010

The purpose of this study is to be applied with the basic data for the design method in the housing space which is differential. So, we analyzed the expression method and the application characteristic to materials of units in housing complex. To that, we researched on the condition of finishing material about the kind of material, color, texture and pattern for components in living room space. The results of this study are as follows : First, at the present time, the Object concept is expressed by 'mixing' and 'juxtaposition' of material, texture and pattern of finishing materials in housing space. But, we could find that the Object concept was used restrictively in housing space. So, we have to find different expression methods to be the effective and differential design by being applied Object concept for the housing space. Second, the 'mixing' which is the method to express the Object concept is showed in only 'art wall'. so, we can estimate that the method is the limited method to plan the varied housing. It is needed various expression methods to design components for the housing space. Third, it showed that the 'mixing' was a passive expression method using a little differential for design of housing space. We could estimate that similar methods were applied to the housing design. By results of this study, we can think that the develop study is needed to find design methods for expression of the Object in housing space.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2010

This paper describes patch antenna design method of antenna high gain and broad bandwidth using cylindrical magneto material around feeding line. Strong current induction method applied combination to generate magnetic fields around feeding line for antenna high gain characteristic and principle of PIFA designed application for design of antenna broadband. In case of single CMM, gain increased 3.96 dB compare with the reference antenna gain however bandwidth characteristic not increased compare with the reference antenna. In case of dual CMM, gain improved about 10 dB compare with the reference antenna and -10 below bandwidth is 700 MHz(50 MHz~750 MHz) with this paper designed high gain characteristic.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.419-426
• /
• 2010

This paper discusses a series of experiments including material improvement in order to ensure quality of grouting for the post-tensioned structure. In presstressed concrete, grouting refers to the construction procedure of filling empty space of duct enclosing the prestress tendons using cementitious material, To date, adequate quality control of the grouting has not been established in Korea because the relationship between the grouting and durability of post-tensioned structure is not well-recognized. The Korean standard does not consider the important material characteristic, wick effect, which is caused by tendons in the ducts, and furthermore current standard testing method does not quantify reasonable material segregation. As a result, the grout material, which satisfies the current material standards, may well exhibit excessive bleeding of water or shrinkage during construction. In this study, international codes and standards related to grouting were surveyed. The mix proportions of the constituents and novel admixtures were suggested to meet equivalently with these standards. Performance of this enhanced grout was compared with common domestic grouts using the international standard testing method. A series of mock-up specimens considering geometry of PC beam was constructed and grout flow pattern was observed as the grout was injected. It was observed that the grouting performance was highly influenced by material properties and filling characteristic can be varied depending on geometry of ducts.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.3-9
• /
• 1997

The strength of material is scattered owing to the inhomogenity of microstructure, in spite of the same material. Therefore, in order to design the mechanical structure with the reliability engineering, it is important to grasp the statistic nature of material strength. In this paper, effects of grain sizes for the statistical nature of the fatigue crack growth was discussed. And the statistical of mechanical properties was compared with statistical nature of the fatigue crack growth rate.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.26
• /
• pp.1-11
• /
• 1992

Material Handling equipments such as hoists, cranes, storage and retrieval machines, gantry robots and conveyors are carrying out more important tasks in material flow automation field. This paper is concerned with the characteristic and the position of this industry, and presents the status of the business world scale, supply and demmand. import and export transition, and directing posts of the profits. Also it gives productivity security and activity.

• Transactions of Materials Processing
• /
• v.6 no.3
• /
• pp.221-226
• /
• 1997

Chevron crack in cold extrusion has been studied in view of deformation conditions and material characteristics. There is V formed chevron crack is occasionally occurred in core part of shaft by multistage free extrusion. Although many research results were reported and theoretical analyses were accompanied, in this study we discussed practical method to prevent chevron crack in the field of working conditions and material characteristics. We have found that chevron crack is eliminated under condition of high hydrostatic state in deformation and decreased segregation, refinement of micro structure of materials.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.275-278
• /
• 2012

We investigate the interaction between the propagation of detonation and inserted gaps in the high explosive. The Eulerian-based multi-material simulation code validated through comparison with experimental results was used. A series of gap materials is used to understand the detonation propagation characteristic in the presence of multiple gaps.