• Korean Journal of Environmental Agriculture
• /
• v.42 no.3
• /
• pp.177-183
• /
• 2023

Rendering, is attracting attention as a technology that can stably and quickly process livestock carcasses. However, large amounts of livestock carcass solid residues are discharged in this process and limited methods are available for recycling them. In this study, rendered animal carcass solid residues were pyrolyzed to produce carbonized materials (350℃; RACR-C) and their chemical properties were investigated. Further, RACR-C were applied to cabbage cultivation for investigating their crop growth characteristics and soil improvement effects. RACR-C contained large amounts of fertilizer components such as nitrogen and phosphorus, and showed no toxic effects on the seedling growth of crops. The content of water-soluble nutrients released from RACR-C under the reaction time increased rapidly within 30 min, but was insignificant compared to the total content. Thus, most fertilizer components in RACR-C were not readily soluble in water. The optimal application amount for applying RACR-C to cabbage cultivation based on the changes in cabbage growth, inorganic content, and soil chemistry was 200 kg/10a. Overall, pyrolysis of solid residues after rendering livestock carcass to produce carbonized material as a soil improver is an effective method to recycle the waste discharged from the rendering process.

• Proceedings of the Technology Innovation Conference
• /
• 2002.06a
• /
• pp.238-256
• /
• 2002

Competitiveness of a nation can be explained by the concept of national innovation systems(NIS). As components of NIS, industry clusters become the issue in analysing innovative activity of an economy. Innovative clusters can be identified by the innovation survey or other economic activity data. Input-output Table was used widely as a tool for quantitative analysis, This paper classifies seven clusters in Korean industry based on inter-industries trade of intermediary goods and services, Maximizing procedure method is used in analysing input-output table. Identified clusters are Textiles/chemicals, Construction/Material, Instrument/Equipment, Automobile, Services, Energy, and Agriculture/Food cluster, Among these clusters, some different characteristics in R&D portfolios are detected. R&D investment characteristics of each cluster give us significant implications in understanding innovative dynamics of Korean industry.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.3
• /
• pp.46-52
• /
• 2009

Nowadays, many components in automobile, aircraft, offshore structure and industry require lightness and high strength. However, since developments of advanced materials have limitations, it mainly is applying to method of surface hardening. This study offered research about camshaft that is one among engine important component. The material used in this study is 0.53% carbon steel as structure material of camshaft, splineshaft, coupling, pulley, driveshaft et cetera. Camshaft is processed using mainly carbon steel, and receives wear and fatigue by special quality high speed of parts. Therefore, camshaft need surface hardening to improve camshaft's fatigue life and increase durability of engine. This study compare to residual stress and martensite microstructure created by high frequency induction treatment, and these results lead to the conclusion of fatigue crack growth characteristics.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.1961-1970
• /
• 2017

Lespedeza cuneata G. Don is a traditional herb that has been associated with multiple biological activities. In this study, we investigated the antioxidative/antiaging activities and performed an active component analysis of the non-fermented and fermented (using Lactobacillus pentosus) extracts of Lespedeza cuneata G. Don. The antioxidative activities of the fermented extract were higher than those of non-fermented extracts. The elastase inhibitory activity, inhibitory effects on UV-induced MMP-1 expression, and ability to promote type I procollagen synthesis were investigated in Hs68 human fibroblasts cells. These tests also revealed that the fermented extract had increased antiaging activities compared with the non-fermented extract. A component analysis of the ethyl acetate fractions of non-fermented and fermented extracts was performed using TLC, HPLC, and LC/ESI-MS/MS to observe changes in the components before and after fermentation. Six components that were different before and after fermentation were investigated. It was thought that kaempferol and quercetin were converted from kaempferol glucosides and quercetin glucosides, respectively, via bioconversion with the fermentation strain. These results indicate that the fermented extract of L. cuneata G. Don has potential for use as a natural cosmetic material with antioxidative and antiaging effects.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.123-130
• /
• 2011

BIM based design methodology requires more information than traditional design methodology in order to insure efficiency throughout the project. BIM based design not only requires all building data in the form of 3D shapes, but also all other relevant data regarding building components. Information is typically grouped in a standard classification system such as by standardized material names. The development of a domestic BIM based standard classification system is yet to be created and deployed in the industry. Each designer is specifying their own building information classification systems which is causing inconsistency in the industry. Therefore BIM based designs, are causing confusion in the industry as each designer follow no guidelines for material standardization classification. The lack of information regarding this in the BIM template will continue to cause confusion about a projects building information data consistently. This study is that of preliminary research to develop a BIM template. First, overseas BIM templates were analyzed regarding BIM standards and documentation. Examination then followed regarding the element and characteristics needed for the development of a BIM template, a suggested hierarchy of elements required for a BIM template were then made. The result of this research is that it will be used to develop a "BIM template prototype", to support the generation of building information data regarding neighborhood facilities.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.482-486
• /
• 2007

Industry for mobile camera module is a complex one based on various technologies, including mechanics, communication technology, material engineering, and electronics which are connected closely. This industry has been already known to a higher value-added business, and as going into an aging society, is expected a market growth. Also, it is a knowledge based component industry and each components assembled into product is almost home made items. This characteristics made many small and medium and venture enterprises participate in this area. Using this study, related companies refer the status and make the decision for commercialize the technology in the internal and world market.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.45-49
• /
• 2010

The automotive industry has shown a growing interest in tube hydroforming during the past years. The advantages of hydroforming (less thinning, a more efficient manufacturing process, etc.) can, for instance, be combined with the high strength of extra high strength steels, which are usually less formable, to produce structural automotive components which exhibit lower weight and improved service performance. Design and production of tubular components require knowledge about tube material and forming behavior during hydroforming and how the hydroforming operation itself should be controlled. These issues are studied analytically in the present paper. In this study, the whole process of rear sub-frame parts development by tube hydroforming using AA6061 material is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Engineering) to confirm hydroformability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape in automotive rear sub-frame by hydroforming process were carefully investigated. Overall possibility of hydroformable rear sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending and hydroforming. In addition, all the components of prototyping tool are designed and interference with press is examined from the point of geometry and thinning.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.3
• /
• pp.278-282
• /
• 2006

The powdered boil-dried oyster (C), the powdered smoke-dried oyster (OS-1) and the powdered smoke-dried oyster scrap (OS-2) were examined for their taste-active components, quality characteristics for potential utilization as a natural flavoring substance. The free amino acid level of OS-l and OS-2 were 395.6 mg/100 g and 551.5 mg/100 g, respectively, and that of betaine of OS-1 and OS-2 were 164.6 mg/100 g and 214.9 mg/100 g, respectively. The contents of inorganic ions were rich in Na, K, P, Ca and Mg in that order. Major free amino acids were taurine, glutamic acid, proline, alanine and glycine. The extract condition of the OS-1 and OS-2 the instant soup was the most appropriate at $98^{\circ}C$ for 1-5 min. The hot water extract of OS-1 and OS-2 with additives such as salt, sugar, pepper and onion powder had a good organoleptic qualities compared with the conventional flavoring substances in a local market. We conclude that powdered smoke-dried oyster and its scrap can be commercialized.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.33-39
• /
• 2020

Self-piercing rivets are often used in the automotive industry, among other industries, as mechanical components to join multiple materials such as aluminum alloys. Self-piercing rivets have a strong sealing property, although there is considerable scope for their performance improvement. In this study, to enhance the performance of self-piercing rivets, the hybrid self-piercing riveting (SPR) technique, using the existing SPR and structural adhesive, was proposed. Moreover, heterogeneous material specimens subjected to the hybrid SPR technique were manufactured and tested. The joint strength of the test pieces of different materials was evaluated through finite element analyses.