• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.493-496
• /
• 2003

Electrical characteristic of tracking resistance, volume resistance, insulation breaking strength etc. and mechanical characteristic are required to high voltage insulation insulator silicone rubber. Tracking resistance is adding much ATH to improve tracking resistance as the most important factor among them. But, there is problem that mechanical strength grows worse rapidly adding much ATH. Therefore, this research studied effect that flame retardant gets to tracking resistance during factor that influence to tracking resistance.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.770-777
• /
• 1997

Some polymer materials including epoxy resin are being instead of porcelain for outdoor insulating materials such as insulators bushings cable terminators and surge arrester housing. And the largest problem to be overcomed is the tracking and erosion of the outdoor polymer material brought about by dry band arcing during prolonged exposure to contaminations. In this paper the effect of surface tension wettability flow rate of contaminants with varying surfactant content and frequency of applied voltage on the tracking breakdown of epoxy insulating materials were investigated. As the flow rate of contaminant is increased the surface resistivity is decreased and the leakage current is increased the time to tracking breakdown is decreased. It is found that time to tracking breakdown depends on the surface tension of contaminant that is difference of wettability. And as the frequency of applied voltage is increased time to tracking breakdown decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.206-209
• /
• 2002

The purpose of this research was to find influence of compounding materials on electrical properties of silicone rubber such as tracking characteristic. The tracking characteristic was tested through controlling the ATH, a widely use anti-tracking agent. Regarding the particle size and coupling agent of ATH, compound silicone rubber with ATH of coupling agent and larger diameter showed better anti-tracking properties. It can be included that ATH of coupling agent use vinyl silane, dispose of tracking characteristic was achieve excellant results.

• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.91-98
• /
• 2017

본 논문은 PVC 절연재료의 가속열화에 따른 트래킹 특성에 관한 연구이다. PVC 절연재료를 절연열화 시키기 위해 가속수명 시험방법 중 아레니우스 방정식을 이용한 가속열화실험을 진행하여 등가연수 0년, 10년, 20년, 30년, 40년 된 실험시료를 제작하였다. 그 후 KS C IEC 60112 기준에 의한 트래킹 실험을 진행하였다. 가속열화에 따른 PVC 트래킹 특성 측정 결과 염화암모늄 0.1%를 PVC 절연재료에 투하하였을 때, 트래킹은 발생하지 않았다. 하지만 트래킹 진전과정의 전류파형 및 전압파형을 등가수명 0년에서부터 40년까지 분석한 결과 절연성이 파괴되어 본 재질의 기능성을 갖지 못하는 BDB 구간까지 등가수명 0년을 기준으로 등가수명 10년의 경우 위험성 1.4배 증가, 20년의 경우 위험성 2배 증가, 30년의 경우 위험성 3.5배 증가, 40년의 경우 위험성 7배 증가하는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.530-537
• /
• 2008

This paper describes the results of a study on the tracking performance of outdoor insulating materials based on the rotating wheel dip test(RWDT). And, the influence of surface degradation was evaluated through such as measurement of the flashover voltage after and before tracking test, also aspects of surface degradation using scanning electron microscopy. The time to tracking breakdown of treated filled specimen is longer than untreated filled specimen. And, after the RWDT, the surface of specimen by adding untreated filler appeared heavy erosion. It was found that the addition to surface treated filler, the better tracking resistance. In the RWDT, the breakdown specimen is not affected by the dry flashover voltage, despite the fact that the surface degradation of tracking test has different state on each specimen. This suggests that wet flashover voltage play an important role in evaluating of tracking and erosion on the surface degradation in tracking test. And, the flashover voltage of specimen under wet conditions are greatly affected by the salt concentration and degree of degradation by the RWDT Because of hydrophobicity and degree of degradation by the RWDT, the flashover voltage of treated filled specimen is higher than that of untreated filled specimen. Different types of specimen may have different hydrophobicity and their surface state under contaminated conditions may not be the same.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1049-1053
• /
• 2007

Cogged belts get unpleasant noise when the speed is up and down. This paper investigates optimum condition for reducing a belt noise that is caused by a belt shape and properties of the material. Order tracking is used analyze belt noise. First step, the pitch length exerts an important influence on the order noise. Second step, material of belt is also important for reducing noise level. The experimental results showed the modified form and material of belts to reduce the noise.

• 대한전기학회논문지
• /
• 제34권12호
• /
• pp.457-463
• /
• 1985

This paper studies on the tracking phenamena by the IEC recommended method with various polymeric insulating materials which are used in industrial fields. Under the same experimental condition, according to the materials it is observed that there are the type of tracking breakdown and the type of tracking erosion. In the tracking breakdown type materials, the tracking breakdown is occurred at a small number of drops increasing of test voltage and solution density. In the tracking erosion type materials, the erosion depth is saturated or proportioned as increasing of test voltage and solution density.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.430-435
• /
• 2007

This paper describes the results of electrical characteristics assessment for organic insulations of polyethylene(PE) series insulations and acrylonitrile butadiene styrene copolymer(ABS). In the experiment, 4 kinds of specimens by composition density were tested in relative permittivity, specific resistance and tracking duration. A WinDETA system and a tracking test set manufactured for this assessment were used to measure the dielectric parameters and tracking duration, respectively. In measuring the tracking duration, the time from testing voltage application to testing circuit breaking due to the tracking current was measured. As a result, dielectric dispersion was observed in measuring the relative permittivity of ABS. It was confirmed that the relative permittivity decreased with the density of the PE series insulations and it depends rather on the temperature than frequency. In most specimens, specific resistance exponentially decreased with frequency and the result for each specimen was almost similar. By the way, in the tracking test, all the PE series insulations showed more excellent performance than ABS and especially in the case of HDPE, its tracking withstand performance was the best.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.447-450
• /
• 2002

Recently polymeric insulators and arresters are being used for outdoor high voltage applications. Polymeric insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymeric insulator kind are a relatively new technology, but their expected life is still unknown. In this paper, the material property for polymeric insulating material such as silicone rubber and EPBM is investigated by cross-link time and the relation between tracking resistance and W resistance is analyzed by IEC 60587 and W aging experiment.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.879-885
• /
• 2013

Satellites provide a lot of information and essay roles in the areas of defense and space observations. The precise distances to the satellites are measured by emitting and retro-reflecting a laser. For such surveys, satellite laser ranging (SLR) systems have been developed in different forms and for different areas. The structural integrity of the tracking mount is essential for it to be able to track a high-speed satellite precisely, overcoming the various external and internal disturbances and operating conditions. In this study, the analysis of a tracking mount was performed for weight, wind loads, and inertia loads in order to verify its soundness. The results of the comparison between aluminum and steel were analyzed in order to select the optimal material for the fork and main housing part. In addition, the natural frequency and mode shape were predicted. Optimal material selection and structural integrity will also be verified using static analysis.