• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.217-223
• /
• 2010

In general, fiber-reinforced plastics (FRP) wastes are simply buried or burned. Landfill brings about a permanent contamination of soil due to the inability of FRP to decompose and incineration causes an issue of generating toxic gases and dusts. There have been several ways to treat the FRP wastes such as landfill, incineration, chemical recycling, material recycling and the utilization of energy from combustion. Most methods excluding material recycling are known to have critical limitations in economic, technical and environmental manners. However it is known that material recycling is most desirable among the methods handling FRP wastes. In this study, to investigate the purpose of feasibility of material recycling, various bulk molding compound (BMC) specimens were prepared with the various contents of unsaturated polyester resin binder (25, 30, 35 wt%) and the various replacement ratios of FRP wastes powder (0, 25, 50, 75, 100 wt%) substituted for filler. To evaluate the physical properties BMC specimens, various tests such as tensile strength, flexural strength, impact strength, hot water resistance and SEM imaging were conducted. As a results, mechanical strengths decreased with an increase of replacement ratio of FRP waste powder and physical properties of BMC specimens were deteriorated in the hot water resistance. The fluidity of BMC with more than 50 wt% of the replacement ratio of FRP wastes powder decreased remarkably, causing a problem in the BMC composite.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.18-30
• /
• 2012

Zirconium is one of the most important material used as cladding of fuel rods in nuclear reactors because of its high dimensional stability, good corrosion resistance and especially low neutron-absorbing cross section. However, Hf free nuclear grade Zr sponge is commercially produced by only three countries including USA, France and Russia. So, Zr has been thoroughly managed as a national strategic material in Korea. Most of the zirconium is used for Korean nuclear industry as nuclear fuel cladding materials manufactured from Hf free Zr alloy raw material. Also, there are some other applications such as alloying element and detonator. In this review, zirconium production and recycling technologies have been reviewed and current industrial status was also analyzed. And recent achievements in innovative reduction technologies such as electrolytic reduction process and molten oxide electrolysis were also introduced.

• Clean Technology
• /
• v.18 no.1
• /
• pp.69-75
• /
• 2012

In this study, we executed an environmental impact assessment about recycling of ITO (Indium Tin Oxide), used for touch panel. ITO is mainly used to make transparent conductive coatings for touch and flat screen LCD (Liquid Crystal Display), ELD (Emitting Light Device), PDP (Plasma Display Panel). This demand is increasing little by little. but form current status, ITO is discarded than recycling. It is important to recycling ITO for national strategies about resource conservation, and reduce environmental burden. Also Landfill or incineration of ITO cloud be harmful to the human health in the long-term. Material Life Cycle Assessment method (MLCA) was conducted for comparison landfill and recycling of ITO. MLCA would provide more information for environmental issues and potential environmental impacts of ITO. The study includes two scenarios, the basic scenario is recycling of ITO (10, 20, 30%) and the other scenario is landfill of ITO. In addition, amount of carbon dioxide and energy were calculated.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.70-81
• /
• 2021

This study evaluated the recyclability of waste plastics in used coffee capsules disposed of as municipal waste. For recycling, a new material separation process was developed to remove the coffee grounds through primary crushing, washing, sieving, and secondary crushing, followed by corona discharge electrostatic separation. Furthermore, for the under 10 mm size fraction samples, the aluminum removal and the plastic recovery were 95.4% and 98.3%, respectively, under optimal conditions. In addition, for the 15 mm fraction samples, the aluminum removal and the plastic recovery were 91.3% and 97.2%, respectively. To evaluate the recyclability of the separated waste plastics, the samples were pelleted, and their material properties were analyzed. No hazardous substances were detected, and the results were similar to those for homo-PP. Therefore, it was confirmed tha t sufficient functiona lity existed a s recycled PP. However, owing to the da rk color of the pellets, limited applications to black or dark products are expected.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.79-89
• /
• 2023

One of the foremost environmental challenges, alongside the contemporary focus on achieving carbon neutrality, pertains to the pervasive issue of plastic waste. Thermochemical recycling technology, operating under high-temperature conditions to covert organic matter and recycle it into raw materials and energy, represents a transformative approach surpassing the conventional bounds of material recycling predominantly applied in plastic waste management. The thermochemical recycling paradigm is emerging as a pivotal technology within the circular economy, capable of transforming waste plastics into raw materials for producing original plastics. Its significance extends beyond national borders, garnering global attention due to its versatility as a chemical or energy recycling method, contingent upon the subsequent processes and final products. This study aims to scrutinize three quintessential thermochemical recycling technologies: combustion, gasification, and pyrolysis. Furthermore, the study discusses the recent major technology trends of these technologies.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.187-196
• /
• 2015

With the stabilization of Korea's industrialization, it has become interested in the efficient use of rare metals, climate change and industrial environment and safety etc. It is thus making efforts to implement economic policies that address such issues. Therefore it is necessary to understand the demand, supply and use of metal materials. Since 2010, the Korean government has developed the integrated material flow methodology and has been trying to examine the demand, supply and use of metal materials. In 2013, the Korean government surveyed the material flow of chromium. Material flow analysis and environment emission of chromium were investigated 8 steps; (1) raw material, (2) first process, (3) Intermediate product, (4) End product, (5) Use/accumulation, (6) Collection, (7) Recycling, (8) Disposal. Chromium was used for stainless steel, alloy steel, coated sheets, refractory material and coating materials. Recycling was done mainly in use of stainless steel scrap. To ensure efficient use of chromium, process improvement is required to reduce the scrap in the intermediate product stage. In the process of producing of the products using chromium, it was confirmed that chromium was exposed to the environment. It requires more attention and protection against environment emission of chromium.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.24-32
• /
• 2011

The study was to grasp features of new material applicable to housing space in the sustainable side by analyzing materialistic features of new material and features of sustainable material with sustainable new material. Through analysis on sustainable new material, the study deducted the below conclusion. First, through the precedent studies, the characteristics of sustainable materials have been classified into eight categories : friendly healthiness, non-toxicity, comfortableness, naturality, recycling, harmlessness of environment, separate collection, reusability. After the criteria have been brought up from new material applicable to housing space in the sustainable. Second, in materialistic Characteristics of new material, 'New Process' was mainly applied. There was no any new material applied to 'new raw material'. Therefore, it is thought that it is necessary to study on development of perfectly new material and to study on new material to apply material used in other fields to finishing material of dwelling space. Third, in Characteristics of sustainable material, 'Re-serviceability' appeared most and 'Non-toxicity' and 'Recycling' appeared in the next. 'Friendly Healthiness' and 'Separate collection' appeared only one on the other side. Therefore, it is judged that it is necessary to develop and study new material including health components considering user's health, function for health increase and function to grope comfort for humans. Finally, after researching and analysis the criteria by recently presented the new material, it has been concluded that the standard can be used as the criteria of new material for the possibility of application in housing space. On the basis of the study, the author will carry out analysis on sustainable new material minutely and utilize it as basic data to suggest a standard of sustainable new material applicable to dwelling space in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.79-92
• /
• 2004

The purpose of this study is to examine the actual condition of environment conscious logistic system which is essential to make material recycling economic society. Environment conscious logistic management which meant simply recycle is tend to promote material reduction, reuse and recycling. We have made case studies about advanced environment friendly logistic system. To examine Korean companies' environment conscious logistic system, we made survey form which is consist of 82 questionnaires and 154 companies have participated for this. And we have analyzed the survey responses. As a result of this study, we propose the way of constructing environment conscious logistic system in Korea.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.209-209
• /
• 2006

Ultra-fine fibers are spun by expensive fiber spinning technology using special spinnerets. Ultra-fine fibrous materials have attracted considerable attentions because of their potential applications as high performance wiping cloths, water absorbent sound proofing materials and moisture transfer sporting good. However, production expense of ultra-fine fibers is 5 to 7 times higher than general textile materials. The objective of this research is to develop cost-effective recycling process to produce multi-functional ultra-fine fibrous material in terms of the development of garnetting and carding machines for ultra-fine fibrous material waste and scrap. The efficiency of sound absorption for the recycled polyester nonwoven increased with decreasing length and thickness of component fibers, which was attributed to the reduction of air permeability. It is expected that high value and cost-effective textile products are developed using ultra-fine fibrous wastes and that sound proofing material and oil absorbent f