• 제목/요약/키워드: Material Design

검색결과 10,252건 처리시간 0.042초

인공위성 탑재용 자외선 태양카메라(LIST) 개발 (DEVELOPMENT OF A LYMAN-α IMAGING SOLAR TELESCOPE FOR THE SATELLITE)

  • 장민환;오환섭;임천석;박정선;김진상;손대락;이현수;김상준;이동훈;김성수;김건희
    • Journal of Astronomy and Space Sciences
    • /
    • 제22권3호
    • /
    • pp.329-352
    • /
    • 2005
  • 자외선 영역에서 최대 세기를 보이는 라이먼 알파(121.6nm)선은 태양 채층과 전이영역의 방출선으로 지구 고층 대기 변화의 주요 원인이 되기 때문에, 태양연구에서 가장 중요한 파장대의 하나이다. 그렇지만, 이전의 라이먼 알파선의 관측은 콜로라도 대학 등 미국의 여러 대학들에서 탐사 로켓에 의해 수행된 단속적인 관측들뿐이었고, 여러 위성에 의한 관측들도 시간 분해능이 아주 떨어지는 장기 관측들뿐이었다. 그러므로 인공위성에 탑재되어 충분한 시간 분해능과 연속적인 관측이 충족될 수 있는 라이먼 알파선 태양망원경의 개발은 세계적으로도 중요한 과학적 의미를 갖고 있으며, 인공위성의 운영에 막대한 영향을 미치는 지구 고층 대기에 대한 태양 자외선 복사의 영향을 연구하기 위한 실용적인 목적도 갖고 있다. 이러한 배경에 의해 본 연구는 과학기술위성2호 탑재용 자외선 태양카메라(LIST: $Lyman-{\alpha}$ Imaging Solar Telescope)를 개발하기 위한 목적으로 system 규격결정이 이루어졌으며 광학계, 기계구조 및 전자회로의 예비 설계가 완성되었다. 또한 system requirements에 맞춰 광학계, 기계구조 및 전자회로의 예비 구조 설계가 완료되었으며 기계 구조해석 및 열해석, test plan 결정 및 verification test matrix 작성도 완료되었다. 부분별로는 상세설계가 완료되어 제작에 착수하였으며 본 탑재체의 데이터에 맞는 데이터 획득 시스템을 결정하기위한 기반 조사가 완료되었다. 과학적 운영을 위해서는 태양의 진공 자외선 복사의 연구 방향과 연구 현황 등 데이터를 수집하고, 수집된 자료로 태양에 대해 지속적인 연구가 이루어졌다 자외선 태양카메라 연구개발은 산업적인 파급효과가 큰 광학계의 설계와 비구면 광학계의 제작기술, 첨단 측광기의 기본을 이루는 CCD의 제어기술, 탑재체의 통제 제어 기술이 요구된다. 확보된 우주 탑재체 개발 기술과 결과물들은 본 사업에 적용되었던 시스템 관리 기법과 함께 향후 유사한 우주기술 사업에 이용될 수 있으며 과학적 시스템과 성과물들도 현재 정부가 지원하여 구축하고 있는 우주환경 감시 시스템에 이용될 수 있다.

구동팬텀 시스템에 의한 움직이는 장기의 선량분포 분석 (Analysis of the Dose Distribution of Moving Organ using a Moving Phantom System)

  • 김연래;박병문;배용기;강민영;이귀원;방동완
    • 대한방사선치료학회지
    • /
    • 제18권2호
    • /
    • pp.81-87
    • /
    • 2006
  • 목 적: 움직이는 장기의 방사선치료시에 움직임을 고려한 선량분포의 연구가 많이 이루어지지 않았고, 정적인 상태로서의 선량분포가 고려된 치료 및 연구가 이루어졌다. 그래서 본 연구는 구동팬텀 시스템을 이용하여 움직이는 장기의 선량분포 계측을 시행하였다. 이 연구의 목적은 호흡에 따른 선량분포의 변화가 어떻게 일어나는지에 대한 실험적 계측에 대한 평가이다. 재료 및 방법: 호흡에 의한 움직이는 장기의 선량분포 측정을 위해서 다목적 팬텀과 구동팬텀을 고안 하였다. 다목적 팬텀의 구성은 아크릴과 코르크를 사용하였고, 아크릴의 밀도는 $1.14g/cm^3$이고 코르크는 $0.32g/cm^3$이다. 아크릴은 정상조직을 표현하기 위해 사용되었고, 코르크는 폐를 묘사하기 위해 제작 되었다. 측정용 필름은 가프크로믹 필름과 EDR2필름을 사용하였다. 구동팬텀 시스템은 상하좌우 2차원적인 움직임을 하도록 설계되었으나 본 실험은 1차원적인 움직임만으로 구동하여 측정하였다. 결 과: 코르크 팬텀에서 측정된 선량분포가 아크릴에서 측정된 선량분포보다 반음영이 크게 나타났다. 가프크로믹 필름으로 측정된 선량분포는 선량분포에 따른 광학농도가 낮기 때문에 분포곡선이 평탄하지 않았다. 내부장기의 움직임이 증가함에 따라 선량분포에서 반음영, 평탄도, 대칭도가 점점 증가하였다. 모든 가프크로믹 필름으로 측정된 선량분포는 EDR2필름으로 측정된 필름보다 평탄도나 대칭도가 좋지 않았지만 반음영은 비슷하게 분포되었다. 결 론: 가프크로믹 필름은 현상이 필요 없기 때문에 사용하기 편하고, 조그만 크기로도 쉽게 잘라서 사용할 수 있다. 또한 많은 양의 방사선을 조사할 수 있는 장점이 있다. 그러나 선량에 따른 광학농도의 변화가 작기 때문에 측정 시에 선량분포에 평탄도가 좋지 않다. 움직이는 장기의 방사선치료시 다목적 팬텀과 구동팬텀을 이용하여 질보정이 이루어진다면 치료효과를 향상시킬 것이라 사료된다.

  • PDF

EFFECT OF NUMBER OF IMPLANTS AND CANTILEVER DESIGN ON STRESS DISTRIBUTION IN THREE-UNIT FIXED PARTIAL DENTURES: A THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS

  • Park, Ji-Hyun;Kim, Sung-Hun;Han, Jung-Suk;Lee, Jai-Bong;Yang, Jae-Ho
    • 대한치과보철학회지
    • /
    • 제46권3호
    • /
    • pp.290-297
    • /
    • 2008
  • STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

피복이 한국잔디 및 한지형 잔디의 초겨울 녹색기간연장에 미치는 영향 (The Effect of Covering Materials on Prolongation of Green Period in Zoysiagrass and Cool-season Grass in Early Winter)

  • 이재필;김석정;신석훈;김두환
    • 아시안잔디학회지
    • /
    • 제18권3호
    • /
    • pp.129-139
    • /
    • 2004
  • 본 연구는 피복이 한국잔디와 한지형 잔디의 늦가을과 초겨울의 녹색기간에 미치는 효과를 구명하고자 1999년부터 2001년까지 수행되었다. 한국잔디의 녹색기간 연장을 위해 대조구(Control), 비닐(Vinyl), 검정 차광망, 녹색 차광망과 피복순서에 따라 검정차광+비닐, 녹색차광+비닐, 비닐+검정차광, 비닐+녹색차광으로 처리하였다. 한지형 잔디의 녹색기간 연장을 위해 대조구, 무공 비닐 처리구 및 유공비닐 처리구로 하였다. 조사항목은 온도, 조도, 습도, 녹색도, 엽록소 함량 등을 조사하였으며, 실험구의 크기는 $2\times2$로 3반복 완전임의배치 하였다. 한국잔디 1. 최고온도는 검정 차광망 + 비닐 처리구와 녹색 차광망 + 비닐 처리구가 대조구 및 다른 처리구에 비하여 가장 높은 경향이었다. 최저온도는 대조구 및 차광망 처리구가 비닐 처리구보다 낮아 차광망 처리구들은 야간에 보온 효과가 거의 없는 것으로 판단되었다. 특히 비닐 처리구는 온도가 $10{\pm}5^{\circ}C$이하로 낮을 경우 비닐 처리구와 대조구와의 온도 차이가 없었지만 $10{\pm}5^{\circ}C$이상일 경우 비닐 처리구의 온도가 대조구보다 $10^{\circ}C$정도 차이가 나는 것으로 조사되었다. 2. 조도는 검정 차광망이 들어간 처리구가 대조구에 비해 아주 낮았고 대조구 > 비닐 > 녹색차광망 > 비닐+녹색차광망 $\fallingdotseq$녹색+비닐 차광망 > 흑색 차광망 >비닐+검정 차광망 $\fallingdotseq$검정+비닐 차광망 순이었다. 3. 습도는 차광 처리구가 대조구 보다 높았지만 차광 처리구 간의 차이는 적었다. 4. 녹색도는 10월 중순에서 11월 중순까지 비닐처리구가 우수한 것으로 나타났으나 11월 중순 이후는 비닐+검정 차광처리가 우수하였다. 엽록소 함량 역시 11월 중순까지는 비닐처리구가 비닐+차광망 처리구보다 높았으나 11월 21일 이후의 조사에서는 비닐+차광망 처리구의 엽록소 함량이 높았다. 한지형 잔디 1. 무공 비닐 처리구와 유공비닐 처리구의 온도 차이는 $4^{\circ}C$내외였으나 온도가 $0^{\circ}C$이하로 내려갈수록 대조구와 처리구의 최고 및 최저 온도차이가 감소하는 경향이었다. 2. 습도는 무공 비닐이 유공비닐보다 $15\%$이상으로 높게 나타나 무공 비닐 피복만으로 녹색기간을 연장하고자 할 경우 주기적인 환기가 필요할 것으로 판단된다. 3. 한지형 잔디의 녹색도는 무공 비닐 처리구가 대조구 및 유공 비닐 처리구보다 진하였다. 그러나 12월 22일 이후에서는 그 효과가 급격히 감소하였다. 반면 유공비닐 처리구(양파용)는 온도 유지효과가 작은 것으로 나타나 비닐의 종류, 적정 구멍 수, 간격, 크기 등에 대한 추가 연구가 필요할 것으로 판단된다. 이상의 결과 한국잔디의 녹색기간은 습도보다 온도와 조도의 영향을 많이 받는 것으로 판단된다. 또한 차광을 이용한 한국잔디의 녹색기간 연장은 10월 초순부터 11월 중순까지는 비닐피복을 하고 11월 하순부터는 비닐+검정 차광망을 피복하는 것이 효과적인 방법으로 판단된다. 반면 한지형 잔디의 초겨울 녹색기간 연장은 11월 중순부터 비닐을 피복하여 12월 중순까지 광합성을 유도하고 12월 하순부터는 검정 차광망을 피복하여 엽록소 분해를 지연시켜 준다면 동계기간 내내 일정 수준의 녹색을 유지할 수 있을 것으로 판단된다.

습식 경화교반토 포장의 공학적 특성 (Engineering Characteristics of Wet-mixing Solidified Soil in Pavement Surfacing)

  • 유지형;서동혁;이승원
    • 한국도로학회논문집
    • /
    • 제6권3호
    • /
    • pp.1-7
    • /
    • 2004
  • 관광지의 도로, 산책로 등과 같이 중차량이 통과하지 않고 많은 사람들이 통행하는 도로는 큰 내하력을 갖추지 않아도 되며, 인간공학적이고 환경친화적이어야 한다 이를 위하여 최근에 흙을 주재료로 하여 특수한 경화재와의 혼합물을 사용한 도로 포장공법이 개발되어 사용되고 있지만, 역학적인 해석과 설계가 이루어지지 않고 경험적인 방법에 의존하고 있다. 따라서 흙-경화재 혼합물의 기본적인 공학적 특성을 규명할 필요가 있다. 본 연구에서는 흙-경화재 혼합물의 주재료에 대한 혼합비를 달리하는 일련의 배합을 실시하여 공시체를 제작하고, 이에 대하여 재령별로 강도시험을 실시함으로써 혼합비와 재령에 따른 혼합물의 역학적 특성을 규명하였다. 또한 시멘트콘크리트포장에서는 양생하는 과정에서 수화열이 발생할 뿐만 아니라 그 지지기반인 흙과의 온도에 따른 거동의 차이로 인한 공학적 문제들이 야기됨으로, 흙-경화재 혼합물과 흙의 온도 특성을 비교 분석하였다. 본 연구 결과, 혼합물은 시멘트의 증가에 따라 강도가 증가하고, 수화열을 억제하기 위하여 제한된 시멘트량에 대해서는 경화재와 물의 혼합비가 6%$\sim$8%일 때 가장 큰 강도를 나타내었다. 또한 혼합물의 강도는 14일까지는 재령에 따라 비교적 급격하게 증가하다가 그 이후에는 증가율이 감소하여 28일 후에는 증가율이 급격히 저하되었다. 그리고 본 연구에서 사용한 시멘트량에 대해서는 수화열이 매우 미미하게 나타났으며, 흙과의 온도 특성이 비슷한 것으로 나타났다. 따라서 본 혼합물은 시멘트 콘크리트보다 내하력에서는 크게 못 미치지만 온도 변화에 따른 공학적 문제들을 개선할 수 있으며, 흙을 주재료로 사용하므로 경하중이나 교통량이 적은 포장도로에서 환경친화적인 포장재료로서 우수하게 사용될 수 있을 것으로 판단된다. 말기암환자와 가족을 지지하는 프로그램으로서 활용가치가 높다고 볼 수 있다. 추후 연구는 프로그램의 효용성에 대한 평가가 검토되어야 할 것이며, 다른 병원에서도 각 병원의 특성과 참석자들의 특성을 고려하여 보다 발전된 프로그램이 나오기를 바란다.있어서 진단내용, 환자의 기능적 상태, 합병증 유무 등에 따라서는 큰 차이 없이 회복촉진, 합병증예방상담 및 건강관리지도 항목에서 가장 높은 요구도를 나타냈고 나머지 간호요구는 큰 차이가 없었다. 사망하였다. 한 명(T1N0M0, stage Ib)은 술 후 방사선요법 중에 21개월 째에 양측폐에 다발성 결절을 보이는 전이로 치료 중 사망하였다. 술 후 평균 추적기간은 50.87$\pm$24.77개월이었다. 전체 생존율을 분석해보면 3년에 $97.1\%$, 5년에 $83.7\%$였다. 병기1기 환자의 경우 2년에 $96.3\%$, 5년에 $96.3\%$로 나왔다. 전체 환자의 재발 없는 생존율을 분석해보면 1년에 $100\%$, 2년에 $90\%$, 5년에 $76\%$이고 병기 1기의 경우 2년에 $96.4\%$, 5년에 $90.6\%$였다. 술 후 항암화학요법을 시행한 환자는 7명으로 $22.58\%$이고, 술 후 항암방사선요법을 시행한 환자는 1명으로 $3.22\%$, 2가지 모두 시행한 환자는 2명으로 $6.45\%$였다. 재발부위는 폐전이 3예, 골전이가 1예, 뇌전이가 1예였다. 결론: 기관세지폐포암은 동일병기의 다른 비소세포암보다 수술 절제 후에 비교적 재발률이 적고

  • PDF

복합 집속 카메라의 섬광체배열에서 다중산란에 의한 위치 불확실성 (Position Uncertainty due to Multi-scattering in the Scintillator Array of Dual Collimation Camera)

  • 이원호
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제31권3호
    • /
    • pp.287-292
    • /
    • 2008
  • 방사선 반응에서의 위치정보는 방사선 선원의 영상을 재구성하는데 있어서 매우 중요한 기본정보이다. 이에 대부분의 위치 검출 기술을 이용하여 검출기안에서의 일어난 단일 반응의 위치정보를 알아낼 수 있다. 그러나 섬광체 안에서의 다중산란의 경우 각각의 산란위치를 개별적으로 측정할 수 없고 여러 산란위치의 평균만이 구해질 수 있어서 측정된 방사능의 위치정보에 불확실성이 존재하게 된다. 이 논문에서는 이러한 다중산란에 따른 위치 불확실성을 몬테카를로 시뮬레이션으로 계산하였다. 시뮬레이션 모델은 복합 집속 카메라에 사용된 $50{\times}50{\times}5mm\;LaCl_3$(Ce) 섬광체(pixel크기는 $2{\times}2{\times}5mm$)이다. 복합 집속 카메라는 광전효과와 컴프턴 산란 모두에서 정보를 얻으므로 방사선의 반응에서 부분에너지만 (검출기에) 검출되는 경우와 모든 에너지가 검출 되는 경우를 나누어 위치 불확실성을 계산하였다. 부분에너지만 검출되는 경우 (PED) 위치의 표준편차는 $1{\sim}2mm$ 미만으로 다중산란에 의한 불확실성이 크지 않다는 것을 알 수 있다. PED의 경우 다중산란의 영향이 크지 않으므로 이러한 다중산란은 컴프턴 카메라의 성능에 큰 영향을 미치지 않는다는 것을 알 수 있다. 그러나 모든 에너지가 검출되는 경우 (FED), 122keV입사방사선의 경우를 제외하면, 그 위치의 표준편차가 1차 검출기의 pixel크기에 2배에 달한다. 그러므로 복합 집속 카메라의 코드화된 마스크를 설계하는데 있어 재구성된 영상의 잡음을 방지하기 위해 다중산란에 의한 표준편차가 고려되어야 한다. 모든 입사 방사선에너지에 대하여 FED에 의한 위치 불확실성은 PED에 의한 것 보다 크며 PED 대 FED의 비는 입사방사선의 에너지가 증가함에 따라서 커진다. PED와 FED의 경우 모두 위치의 불확실성이 입사방사선의 에너지에 따라 달라졌다.

  • PDF

가상대학 구현에 관한 연구 (A study on the developing and implementation of the Cyber University)

  • 최성;유갑상
    • 기술경영경제학회:학술대회논문집
    • /
    • 기술경영경제학회 1998년도 제13회 하계학술발표회 논문집
    • /
    • pp.116-127
    • /
    • 1998
  • The Necessity of Cyber University. Within the rapidly changing environment of global economics, the environment of higher education in the universities, also, has been, encountering various changes. Popularization on higher education related to 1lifetime education system, putting emphasis on the productivity of education services and the acquisition of competitiveness through the market of open education, the breakdown of the ivory tower and the Multiversitization of universities, importance of obtaining information in the universities, and cooperation between domestic and oversea universities, industry and educational system must be acquired. Therefore, in order to adequately cope wi th these kinds of rapid changes in the education environment, operating Cyber University by utilizing various information technologies and its fixations such as Internet, E-mail, CD-ROMs, Interact ive Video Networks (Video Conferencing, Video on Demand), TV, Cable etc., which has no time or location limitation, is needed. Using informal ion and telecommunication technologies, especially the Internet is expected to Or ing about many changes in the social, economics and educational area. Among the many changes scholars have predicted, the development and fixations of Distant Learning or Cyber University was the most dominant factor. In the case of U. S. A., Cyber University has already been established and in under operation by the Federate Governments of 13 states. Any other universities (around 500 universities has been opened until1 now), with the help of the government and private citizens have been able to partly operate the Cyber University and is planning on enlarging step-by-step in the future. It could be seen not only as U. S. A. trying to elevate its higher education through their leading information technologies, but also could be seen as their objective in putting efforts on subordinating the culture of the education worldwide. UTRA University in U. S. A., for example, is already exporting its class lectures to China, and Indonesia regions. Influenced by the Cyber University current in the U.S., the Universities in Korea is willing .to arrange various forms of Cyber Universities. In line with this, at JUNAM National University, internet based Cyber University, which has set about its work on July of 1997, is in the state of operating about 100 Cyber Universities. Also, in the case of Hanam University, the Distant Learning classes are at its final stage of being established; this is a link in the rapid speed project of setting an example by the Korean Government. In addition, the department of education has selected 5 universities, including Seoul Cyber Design University for experimentation and is in the stage of strategic operation. Over 100 universities in Korea are speeding up its preparation for operating Cyber University. This form of Distant Learning goes beyond the walls of universities and is in the trend of being diffused in business areas or in various training programs of financial organizations and more. Here, in the hope that this material would some what be of help to other Universities which are preparing for Cyber University, I would 1ike to introduce some general concepts of the components forming Cyber University and Open Education System which has been established by JUNAM University. System of Cyber University could be seen as a general solution offered by tile computer technologies for the management on the students, Lectures On Demand, real hour based and satellite classes, media product ion lab for the production of the multimedia Contents, electronic library, the Groupware enabling exchange of information between students and professors. Arranging general concepts of components in the aspect of Cyber University and Open Education, it would be expressed in the form of the establishment of Cyber University and the service of Open Education as can be seen in the diagram below.

  • PDF

현대회화에서 드러난 해체의 형식론에 관한 연구 -타의적 해체와 자의적 해체의 성격규정을 중심으로- (A study of the destructive styles from Contemporary Paintings - Focused on distinguishing enmity-destruction and self-destruction -)

  • 박기웅
    • 조형예술학연구
    • /
    • 제7권
    • /
    • pp.5-63
    • /
    • 2005
  • Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

  • PDF

자동차 신제품개발 관련 차량기술사의 전문적 업무역량 분석 (A Study on the Competencies of Automotive Professional Engineers in Korea)

  • 김주영;임세영
    • 대한공업교육학회지
    • /
    • 제33권2호
    • /
    • pp.192-217
    • /
    • 2008
  • 차량기술사들은 자동차산업의 현장에서 신제품기획, 마케팅, 연구개발, 제조 및 관리 등의 전문적인 업무를 수행한다. 이들의 전문 기술역량은 기업과 조직의 경쟁력을 증진시키는 원동력이다. 이 연구는 차량기술사들의 전문적 업무역량 특성과 중요도를 규명하여 자동차 기술 분야의 자격검정과 공학교육을 효율적으로 연계할 수 있는 기초자료를 제공하는 데 목적이 있다. 세부 연구문제는 첫째, 전문가(차량기술사, 자동차 관련 전공 대학교수, 자동차 전문가)들은 추론된 차량기술사의 전문적 업무역량별 중요도를 어떻게 인식하고 있는가? 둘째, 차량기술사의 업무역량에 관한 중요도 인식에 있어서 응답자의 소속집단(차량기술사, 자동차공학 전공 대학교수, 자동차 전문가)간에 차이가 있는가? 이다. 연구자들은 현직에 근무하고 있는 차량기술사 등 자동차 신제품 개발관련 전문가 협의 및 개인면담을 통해 차량기술사의 전문적 업무역량을 추출한 다음, 차량기술사 108명, 자동차 및 기계공학전공 대학교수 49명, 기업체의 자동차 전문가 55명을 대상으로 설문지를 배포하여 총 152명(72%)으로부터 설문지를 회수하여 분석하였다. 차량기술사의 전문적 업무역량에 대한 설문지는 영역 및 항목별로 빈도 및 변량분석을 실시하였다. 연구결과는 제동장치설계, 프로젝트진행리더십, 미래예측과 변화관리, 디젤엔진설계, 환경대책, 제품기획과 안전에 대한 기술이 가장 중요한 것으로 나타났고, 인사총무와 재무회계, 노무관리 등에 대해서는 중요도를 낮게 인식하고 있었다. 또한 업무영역평균의 집단별 중요도는 섀시설계영역, 엔진 변속기설계영역, 제품기획 마케팅영역, 자재 물류 품질관리영역, 디자인 차체 의장설계영역, 판매 정비 및 경영지원영역, 소재 및 엔진제조영역, 프레스 및 조립공장 제조 영역 순으로 나타냈다. 자동차개발업무관련 차량기술사의 전문적 업무역량중 고객편익과 안전관련 신기술 응용력, 경쟁력 있는 신제품개발 능력의 중요도가 높았다. 응답집단별로는 교수집단이 타집단 보다 모든 항목에서 중요도 평가 평균값이 높았고, 다음은 차량기술사, 차량전문가 순으로 나타났다.

암절취(岩切取) 훼손(毁損)비탈면에 대한 환경생태적(環境生態的)으로 안정(安定)된 녹화공법(綠化工法)에 관(關)한 연구(硏究)(I) -산림표층토(山林表層土)를 이용(利用)한 녹화토(綠化土)의 효능분석(效能分析)을 위한 실내실험(室內實驗)- (Studies on the Environmentally and Ecologically Stable Revegetation Measures on Rock Cut-Slopes - Availability of Forest Topsoil as a Hydroseeding Material in Greenhouse Experiment -)

  • 우보명;김경훈
    • 한국산림과학회지
    • /
    • 제87권2호
    • /
    • pp.308-315
    • /
    • 1998
  • 암절취(岩切取) 훼손(毁損)비탈면에 적용할 수 있는 종비토(種肥土)뿜어붙이기공법(工法)용 녹화토양자재(綠化土壤資材)로서 산림표층토(山林表層土)의 이용(利用) 가능성(可能性)을 파악하기 위하여, 1996년 3월부터 현지조사 및 파종실험을 실시하였다. 산림토양(山林土壤)의 유형(類型) 및 토양의 피복(被覆)두께에 따른 식생생육특성을 파악하기 위하여 분할구배치법(分割區配置法)(주구(主區) : 산림토양의 유형과 토양피복두께, 세구(細區) : 파종량)에 의한 요인실험(要因實驗)을 실시한 결과를 요약하면 다음과 같다. 산림토양(山林土壤)에 함유된 잠재종자원(潛在種子源)의 발아 생육으로 외래초종(外來草種)을 파종하지 않는 시험구에서는 5~9종/$0.07m^2$이 자연적으로 발생하였다. 외래초종의 파종량을 증가시킬수록 초기에 우점된 외래초종의 영향으로 공시초종 3종외에 자연적으로 출현한 종은 2~6종/$0.07m^2$으로 감소하였다. 식생의 총 출현개체 수는 침엽수토양을 이용한 실험구에서 가장 높았으며, 자연적으로 발생한 종의 비율은 활엽수토양을 이용한 실험구에서 약 30%로서 가장 높게 나타났다. 잠재종자원(潛在種子源)을 함유한 산림토양을 생육기반으로 사용할 경우, 초기에 파종된 외래종(外來種)과 자연적으로 발생한 종의 공생으로 기존의 종자 사용량을 1,000본/$m^2$(발생기대본수) 수준으로 감소시켜도 조기에 다양한 식생을 조성할 수 있었다. 종비토뿜어붙이기공법에 적용시 파종한 종과 자연출현종과의 경쟁, 표층부의 건조, 하부에 매몰되는 종자원을 고려할 때 토양의 피복두께는 5cm 이상으로 하는 것이 다양한 식생의 생육에 적합한 것으로 나타났다..

  • PDF