• Transactions on Electrical and Electronic Materials
• /
• 제8권4호
• /
• pp.149-152
• /
• 2007

[ $(Ba_{0.6}Sr_{0.3}Ca_{0.1})TiO_3$ ](BSCT) thick films doped with 0.1 mol% $MnCO_3\;and\;Yb_2O_3(0.1{\sim}0.7mol%)$ were fabricated by the screen printing method on the alumina substrates. And the structural and electrical properties as a function of $Yb_2O_3$ amount were investigated. The exothermic peak was observed at around $680^{\circ}C$ due to the formation of the poly crystalline perovskite phase. The lattice constants of the BSCT thick film doped with 0.7 mol% is 0.3994 nm. The specimen doped with 0.7 mol% $Yb_2O_3$ showed dense and uniform grains with diameters of about $4.2{\mu}m$. The average thickness of all BSCT thick films was approximately $70{\mu}m$. Relative dielectric constant and dielectric loss of the specimen doped with 0.7 mol% $Yb_2O_3$ were 2823 and 3.4%, respectively. The Curie temperature of the BSCT thick films doped with 0.1 mol% $Yb_2O_3$ was $46^{\circ}C$.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.327-346
• /
• 2017

Laminated plates have many applications in different industrials. Buckling analysis of these structures with the nano-scale reinforcement has not investigated yet. However, buckling analysis of embedded laminated plates with nanocomposite layers is studied in this paper. Considering the single-walled carbon nanotubes (SWCNTs) as reinforcement of layers, SWCNTs agglomeration effects and nonlinear analysis using numerical method are the main contributions of this paper. Mori-Tanaka model is applied for obtaining the equivalent material properties of structure and considering agglomeration effects. The elastic medium is simulated by spring and shear constants. Based on first order shear deformation theory (FSDT), the governing equations are derived based on energy method and Hamilton's principle. Differential quadrature method (DQM) is used for calculating the buckling load of system. The effects of different parameters such as the volume percent of SWCNTs, SWCNTs agglomeration, number of layers, orientation angle of layers, elastic medium, boundary conditions and axial mode number of plate on the buckling of the structure are shown. Results indicate that increasing volume percent of SWCNTs increases the buckling load of the plate. Furthermore, considering agglomeration effects decreases the buckling load of system. In addition, it is found that the present results have good agreement with other works.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.691-714
• /
• 2017

Rotating fluid induced vibration and instability of embedded piezoelectric nano-composite separators subjected to magnetic and electric fields is the main contribution of present work. The separator is modeled with cylindrical shell element and the structural damping effects are considered by Kelvin-Voigt model. Single-walled carbon nanotubes (SWCNTs) are used as reinforcement and effective material properties are obtained by mixture rule. The perturbation velocity potential in conjunction with the linearized Bernoulli formula is used for describing the rotating fluid motion. The orthotropic surrounding elastic medium is considered by spring, damper and shear constants. The governing equations are derived on the bases of classical shell theory (CST), first order shear deformation theory (FSDT) and sinusoidal shear deformation theory (SSDT). The nonlinear frequency and critical angular fluid velocity are calculated by differential quadrature method (DQM). The detailed parametric study is conducted, focusing on the combined effects of the external voltage, magnetic field, visco-Pasternak foundation, structural damping and volume percent of SWCNTs on the stability of structure. The numerical results are validated with other published works as well as comparing results obtained by three theories. Numerical results indicate that with increasing volume fraction of SWCNTs, the frequency and critical angular fluid velocity are increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.400-405
• /
• 2004

In this study, the optimal welding condition of the input power was selected experimentally through the ERW simulator, which is equal to welding status of ERW part in pipe. This condition is the input power 250kW in the heat treatment of the $900^{\circ}C$ normalizing derived from the nondestructive technique and impact energy. In order to evaluate the variation of the fatigue life in the pipe, fatigue surface crack growth test of base and optimal welded metal were performed statistically. As stress intensity factor range (${\Delta}K_s$) increases, the fatigue crack propagation rate (da/aN) of the base metal is faster than that of the welded joint. The variation of the fatigue life in the ERW pipe was estimated statistically using Monte-Carlo simulation with the standard deviation of material constants (C and m) of the paris law in the specimen.

• 약학회지
• /
• 제25권4호
• /
• pp.161-165
• /
• 1981

The binding of two cephalosporins, cephalothin and cefazoline to human serum albumin(HSA) was studied by difference spectrophotometry using a spectrophotometric probe, 2-(4'-hydroxybenzeneazo) benzoic acid. The probe is strong visible absorbing material which interacts with serum albumin to give characteristic spectrophotometric peaks and provides the basis for a convenient assay to measure free and bound amounts in the presence of serum albumin and competitive drugs. The results obtained showed that the probe and cephalosporin compete for the same binding site on human serum albumin; thus the probe can be used to gauge the displacement of cephalosporins from human serum albumin. The data were interpreted on the basis of theory of multiple equilibria. The number of binding sites of human serum albumin for 2-(4'-hydroxybenzeneazo) benzoic acid(HBAB), cephalothin and cefazoline appears to be 4. By using this technique the binding constants were found as follows: HSA-HBAB, $7.89{\times}10^{4}M^{-1}$; HSA-cephalothin, $1.09{\times}10^{3}M^{-1}$ ; HSA-cefazoline, $1.21{\times}10^{3}M^{-1}$.

• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.21-46
• /
• 2011

The natural frequencies of continuous systems depend on the governing partial differential equation and can be numerically estimated using the finite element method. The accuracy and convergence of the finite element method depends on the choice of basis functions. A basis function will generally perform better if it is closely linked to the problem physics. The stiffness matrix is the same for either static or dynamic loading, hence the basis function can be chosen such that it satisfies the static part of the governing differential equation. However, in the case of a rotating beam, an exact closed form solution for the static part of the governing differential equation is not known. In this paper, we try to find an approximate solution for the static part of the governing differential equation for an uniform rotating beam. The error resulting from the approximation is minimized to generate relations between the constants assumed in the solution. This new function is used as a basis function which gives rise to shape functions which depend on position of the element in the beam, material, geometric properties and rotational speed of the beam. The results of finite element analysis with the new basis functions are verified with published literature for uniform and tapered rotating beams under different boundary conditions. Numerical results clearly show the advantage of the current approach at high rotation speeds with a reduction of 10 to 33% in the degrees of freedom required for convergence of the first five modes to four decimal places for an uniform rotating cantilever beam.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.721-726
• /
• 2000

전자공학 및 전과 통신기술의 눈부신 발전은 우리의 생활을 풍요롭게 해주는 반면, 전파의 사용증가로 인한 EMC대책이 사회적으로 중요하게 부각되고 있다. EMI/EMC 측정을 위한 전파무향실이 국제기준을 만족하려면 이를 구성하는 전파흡수가 30 MHz - 1 GHB까지의 주파수 대역에서 20 dB 이상의 전파흡수능을 가져야 한다. 그러나, 1998년 11웍 CISPRll은 주파수 대역을 30 MHL - 18 GHz까지 확장하였다 본 논문에서는 위의 조건을 만족하는 원추절단형 전파흡수체를 제안하고 등가재료정수법으로 광대역 설계하였다. 나아가서, 전파흡수체를 제작하여 그 결과를 이론치와 비교, 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제1권1호
• /
• pp.10-17
• /
• 1980

Penicillin amidohydrolase was partially purified from the fermented broth of Bacillus megaterium, and was immobilized on nylon fiber. The surface area of nylon fiber was increased by roughening it with fine sand and activated by acid treatment. The free amino groups on the nylon fiber exposed by such treatment were then utilized to immobilize the penicillin amidase. Enzymatic properties of penicillin amidohydrolase immobilized on the nylon fiber by covalent bonding and cross linking with glutaraldehyde were studied and compared with those of soluble enzyme. The optimal pH and temperature profile of immobilized enzyme showed only slightly broader peaks, and the values of kinetic constants, $K_m$, $K_{ia}$, and $K_{ip}$, of the immobilized enzyme are only slightly greater than those of the soluble enzyme. These results suggest that the mass transfer effect on the reaction rate for the penicillin amidase immobilized on nylon fiber is not so significant as the enzyme immobilized on some other support material like bentonite. The experimental results of batch reaction agreed well with the results of computer simulation for both the immobilized and soluble enzyme systems, confirming the validity of the rate equation derived which was based on the combined double inhibition by two reaction products.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1231-1235
• /
• 2001

Pseudotetragonal ZrO0.75S whose space group is P212121 was synthesized and the cell dimensions were a=5.110(2) $\AA$, b=5.110(7) $\AA$, and c=5.198(8) $\AA.$ The space group P212121 seems to be resulted from lowering the symmetry of cubic ZrOS structure with P213 space group by lattice distortion due to the oxygen defects. In the distorted structure, bond shortening between metal-nonmetal by reduction of cell volume and alternation of Zr-Zr distance were observed. Dielectric constant and loss data of the bulk material in temperature range -170 to 20 $^{\circ}C$ and frequency range 50 Hz to 1 MHz showed that there was dielectric transition at around -70 $^{\circ}C$ originated from the relaxation of Zr-S segment. Comparing with ZrO2 exhibited the dielectirc constants, 9.0 at room temperature, ZrO0.75S showed high dielectric constant, k = 200.2 at 100 kHz. The activation energy of relaxation time due to dielectric relaxation of Zr-S was 0.47 eV (11.3 kcal/mole). According to the impedance spectra, ZrO0.75S showed more parallel circuit character between the resistance and capacitance components at the temperature (-70 $^{\circ}C)$ that the Zr-S dielectric relaxation was observed.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.26-29
• /
• 2013

$Mn_xFe_{3-x}O_4$ powders have been fabricated by using sol-gel methods; their crystallographic and magnetic properties were investigated by using X-ray diffraction, scanning electron microscopy, M$\ddot{o}$ssbauer spectroscopy, and vibrating sample magnetometer. The $Mn_xFe_{3-x}O_4$ ferrite powders annealed at $500^{\circ}C$ had a single spinel structure regardless of the $Mn^{2+}$-doping amount and their lattice constants became larger as the $Mn^{2+}$ concentration was increased. Their Mossbauer spectra measured at room temperature were fitted with 2 Zeeman sextets due to the tetrahedral and octahedral sites of Fe ions, which made them ferrimagnetic. The magnetic behavior of $Mn_xFe_{3-x}O_4$ powders showed that the $Mn^{2+}$-doping amount made their saturation magnetization increase, but there were no severe effects on their coercivities. The saturation magnetization of the $Mn_xFe_{3-x}O_4$ powder varied from 38 emu/g to 70.0 emu/g and their minimum coercivity was 111.1 Oe.