• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.15-20
• /
• 2012

본 논문에서는 디지털 마이크로파 통신 시스템 수신기의 동작범위(Dynamic Range) 향상을 위한 설계 방법을 K-band FEM(Front-End Module)에 적용하여 설계 및 분석하였다. 동작범위를 광범위하게 설계하기 위해 저 잡음 증폭기(LNA)의 잡음지수를 최소화하여 증폭된 입력신호 레벨을 최소화하는 방법을 제안하였으며, 주파수 변환은 높은 선택도(Q)와 안정도가 높은 위상고정 유전체 발진기(PL-DRO) 및 변환이득을 가지는 능동믹서로 구성하였다. 각각의 모듈을 집적화하여 측정한 결과 약 54dB의 변환이득(CG)과 1.3dB의 전제 잡음지수(NF)를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.281-284
• /
• 2004

In Recent, it became necessary to envelope the technology about electrodeless fluorescent lamp according to demand of the electrodeless fluorescent lamp system that used higher efficiency and advantage of long-lifetime. Especially, in the electrodeless fluorescent lamp which used H-mode, efficiency of lamp is decided from matching parameter of antena and inverter So it is of the utmost importance to design antena and inverter. Therefore, this paper used a transformer principle for efficiency rising of electrodeless fluorescent lamp and interpreted an equivalent circuit, used an impedance analyzer in order to confirm a performance enhancement of lamp along design of antenna, and confirmed parameter characteristic of R, L, C, Z, Phase, Q-factor along a change of magnetic flux density. Also, this paper confirmed a luminance characteristic of electrodeless lamp along parameter change with measuring optical characteristic along a change of magnetic flux density.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1958-1960
• /
• 2003

Here we describe a unique self-oscillating mixer (SOM) design using a modified defected ground structure (DGS) for down-converter. Proposed SOM is consisted of self-oscillator, which can produce negative resistance and select resonance frequency, and input/output matching filter. As the advantage of this SOM can be reused by module that mix signals with transistor that is used to oscillator, it is simply and low-costly designed Also, there is easy advantage to be applied in RFIC/ MMIC technology because it offers excellent high Q value in spite of using micro-strip structure. Designed self-oscillating frequency is 1.04GHz and RF frequency established is 0.8GHz. It was achieved 20dB conversion loss and phase noise of -95dBc/Hz at 100KHz offset frequency over intermediate frequency (IF). The equivalent circuit parameters for DGS are extracted by using a three dimensional EM simulator and simple circuit analysis method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.531-534
• /
• 2004

In Recent, it became necessary to develope the technology about electrodeless fluorescent lamp according to demand of the electodeless fluorescent lamp system that used higher efficiency and advantage of long-lifetime. Especially, in the electordeless fluorescent lamp which used H-mode, efficiency of lamp is decided from matching parameter of antena and inverter. So it is of the utmost importance to design antena and inverter Therefore, this paper used a transformer principle for efficiency rising of electrodeless fluorescent lamp and interpreted an equivalent circuit, used an impedance analyzer in order to confirm a performance enhancement of lamp along design of antenna, and confirmed parameter characteristic of R, L, C, Z, Q-factor along a change of magnetic flux density. Also, this paper confirmed a luminance characteristic of electordeless lamp along parameter change with measuring optical characteristic along a change of magnetic flux density

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.745-757
• /
• 2019

Road surface deteriorations such as potholes have caused motorists heavy monetary damages every year. However, effective road condition monitoring has been a continuing challenge to road owners. Depth cameras have a small field of view and can be easily affected by vehicle bouncing. Traditional image processing methods based on algorithms such as segmentation cannot adapt to varying environmental and camera scenarios. In recent years, novel object detection methods based on deep learning algorithms have produced good results in detecting typical objects, such as faces, vehicles, structures and more, even in scenarios with changing object distances, camera angles, lighting conditions, etc. Therefore, in this study, a Deep Learning Pothole Detector (DLPD) based on the deep region-based convolutional neural network is proposed for autonomous detection of potholes from images. About 900 images with potholes and road surface conditions are collected and divided into training and testing data. Parameters of the network in the DLPD are calibrated based on sensitivity tests. Then, the calibrated DLPD is trained by the training data and applied to the 215 testing images to evaluate its performance. It is demonstrated that potholes can be automatically detected with high average precision over 93%. Potholes can be differentiated from manholes by training and applying a manhole-pothole classifier which is constructed using the convolutional neural network layers in DLPD. Repeated detection of the same potholes can be prevented through feature matching of the newly detected pothole with previously detected potholes within a small region.

• Medical Lasers
• /
• 제10권2호
• /
• pp.82-89
• /
• 2021

Background and Objectives Due to changes in diet and lifestyle, the number of obese people worldwide is steadily increasing. Obesity has an adverse effect on a healthy life, so it needs treatment and improvement. Research related to this is continuously being conducted. Materials and Methods The laser system to compact designed using 808 nm laser diode and Neodymium Yttrium orthovanadate generates a 1064 nm wavelength, the periodically polarized nonlinear crystal pumping laser beam. The pulsed 1064 nm wavelength beam passing through the AO Q-switch is used as the pumping light of the nonlinear optical crystal and is irradiated to the periodic polarized nonlinear optical crystal with a quasi-phase matching period. Nonlinear optical crystals use an oven to control the temperature to generate the desired 1980 nm and 2300 nm wavelengths. Results The 1980 nm and 2300 nm wavelengths generated by temperature control of nonlinear optical crystals are effective for lipolysis. A fiber catheter was used so that the laser could be directly irradiated to the fat cells. In particular, the new wavelength (1980 nm, 2300 nm) can increase the fat reduction effect with low energy (1.3 W). When a laser with a combination wavelength of 1980 nm and 2300 nm was used, an average lipolysis effect of 20% was obtained. Conclusion A mid-infrared lipolysis laser system with excellent absorption of fat and water has been developed. We conducted a princlinical study to confirm the efficacy and safety of the lipolysis laser system, and obtained good results for lipolysis with low energy.

• 한국컴퓨터게임학회논문지
• /
• 제31권4호
• /
• pp.157-166
• /
• 2018

각종 비즈니스와 거래가 이루어지는 사이트에서 고객과 서비스 공급자와의 소통은 중요한 문제이다. 특히 어떠한 문제가 발생해 문의가 들어왔을 때 그 문제를 빠르고 정확하게 해결하는 능력은 사이트에 대한 신뢰와도 직결된다. 본 논문에서는 재능마켓 플랫폼 사이트에서 챗봇 기술을 이용해 사이트 이용자들의 불평과 문의를 처리하는 방식을 제안한다. 우선 문의자와 실시간으로 대화할 수 있는 챗봇을 구현하여 사이트 이용법, 단어 검색 등의 기능을 이용할 수 있게 하였다. 몇 단어 혹은 문장으로 정의하기 힘든 사이트의 각종 오류와 문제에 대해서는 에러코드를 지정해 데이터베이스화시켰다. 사이트 이용자들은 오류 발생 시 출력되는 에러코드를 챗봇에 문의하여 그에 대응하는 답변을 실시간으로 얻을 수 있었다. 본 연구에서 구현한 챗봇은 사이트 이용 시 오류를 경험하거나 문의가 생긴 이용자에게 빠르고 정확한 답변을 줄 수 있어 만족스러운 경험을 제공했다. 이는 장기적으로 사이트의 신뢰성과 호감도에 긍정적인 영향을 주고 오류 문의 등에 들어가는 인력과 시간비용을 줄이는 등의 도움을 줄 것으로 예상된다.

• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1557-1564
• /
• 2014

본 논문에서는 일반화된 공간천이변조시스템에서 신호 복원 성능의 개선을 위하여 병렬 직교매칭퍼슛 기술을 이용한 신호 검출기법을 제안하고 그 성능을 분석한다. 일반화된 공간천이변조 시스템에서 수신신호의 복원은 압축 센싱에서 성긴신호 복원과 매우 유사하다. 성긴 신호 복원에서 자주 사용되는 직교매칭퍼슛 기법은 매 반복과정에서 수신 신호와 채널 행렬과의 상관도가 높은 인덱스를 송신신호의 Nonzero 인덱스로 1개씩 선택한다. 반면 제안된 POMP기법에서는 수신신호를 이용하여 첫 번째 반복과정에서 채널행렬과의 상관도가 높은 인덱스를 복수(M)개 선택한 후, 선택된 M개의 인덱스를 초기 인덱스로 하는 M개의 OMP과정을 병렬적으로 수행한다. 최종적으로 각 OMP과정에서 복원된 신호 중 수신된 신호와 복원신호사이의 잔차 (Residual)가 가장 작은 후보 신호를 최종 복원 신호로 선택한다. 본 논문에서는 POMP기법에 양자화기법을 결합한 알고리즘도 함께 제안한다. 제안된 POMP알고리즘은 OMP대비 M배의 복잡도를 갖지만 신호 복원 성능은 매우 탁월하다.

• 한국자기공명학회논문지
• /
• 제9권1호
• /
• pp.48-60
• /
• 2005

Purpose: The purpose of this study was to design and build an optimized birdcage resonator configuration with a low pass filter, which would facilitate the acquisition of high-resolution 3D-image of small animals at 3T MRI system. Methods and Materials: The birdcage resonator with 12-element structures was built, in order to ensure B1 homogeneity over the image volume and maximum filling factor, and hence to maximize the signal to noise ratio (SNR) and resolution of the 3-dimensional images. The diameter and length of each element of a birdcage resonator were as follows: (1) diameter 13 cm, length 22 cm, (2) diameter 15 cm, length 22 cm, (3) diameter 17 cm, length 25 cm. Spin echo pulse sequence and fast spin echo pulse sequence were employed in obtaining MR images. The quality of the manufactured birdcage resonators wes evaluated on the basis of the return loss following matching and tuning process. Results: The experimental MR image of phantoms by the various manufactured birdcage resonators were obtained to compare the SNR in accordance with the size of objects. The size of an object to that of coil was identified by parameters that were estimated from the image of a phantom. First, the diameter of the birdcage resonator was 15cm, and the ratio of the tangerine to the birdcage resonator accounted for approximately 27%. The Q factor was 53.2 and the SNR was 150.7. Second, at the same birdcage resonator, the ratio of the orange was approximately 53%. The SNR and the Q parameter was 212.8 and 91.2, respectively. Conclusion: The present study demonstrated that if birdcage resonators have the same forms, SNR could be different depending on the size of an object, especially when the size of an object to that of coil is approximately 40~80%, the former is bigger than the latter. Therefore, when the size of an object to be observed is smaller than that of coil, the coil should be manufactured in accordance with the size of an object in order to obtain much more excellent images.

• 한국전자파학회논문지
• /
• 제29권5호
• /
• pp.397-400
• /
• 2018

본 논문에서는 칩 면적을 최소화한 65 nm CMOS 기반 30~46 GHz 대역 광대역 증폭기 회로의 설계 및 측정결과에 대하여 기술하였다. 전체 증폭기의 칩 면적을 줄이기 위해 결합 인덕터를 이용한 임피던스 정합회로를 사용하였다. 제작된 광대역 증폭기 회로는 9.3 dB 최대 이득, 16 GHz의 3 dB 대역폭 및 42 % 비대역폭 등의 측정 결과를 보였다. 입출력 반사 손실은 각각 35.8~46.0 GHz 대역과 28.6~37.8 GHz 대역에서 10 dB 이상이다. 공급 전압은 1.2 V이며, 소비 전력은 42 mW이다. 3 dB 대역폭 내에서의 군 지연 변화는 19.1 ps이며, 패드를 제외한 칩 면적은 $0.09mm^2$이다.