• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.12-22
• /
• 2005

The purpose of this study is to select suitable planting base for the mat-type rooftop greening in order to popularize rooftop greening system easily. The experiment was conducted from 2004 June to 2005 May under several conditions; 4 soil depths under mats(2cm, 5cm, 10cm, 15cm), two soil mixtures(natural soil 80%+leaf mold 20%, artificial soil) and two light conditions(full sun place, 20% shaded place). In this experiment, 3 types of mats were used ; the herbaceous plants mat(11 plants inclusive of Lotus corniculatus L., Silene armeria L.), the lawn mat with Festica arundinacea and Sedum mat with Sedum kamtschaticum, Sedum sarmentosum, Sedum oryzifolium, Sedum middendorffianum. The result is as follows; in the mat-type rooftop greening, the herbaceous plants mat, lawn mat and sedum mat are the similar number of plant and effect of greening on soil depth 2cm, 5cm and 10cm, 15cm. So suitable soil depth of rooftop greening is 10cm for the load and economical factor. Thus the mat-type rooftop greening possible planting base depth of all 13cm as soil depth 10cm and mat depth 3cm. As soil mixtures, the number and growth of plants were better mat and 'natural soil 80% +leaf mold 20%' than mat and artificial soil. In herbaceous plants mat, Silene armeria L., Dianthus chinensis, Centaurea cyanus L., Lotus corniculatus L. are survival in full sun place and Silene armeria L., Dianthus chinensis, Centaurea cyanus L. are survival in 20% shaded place. In conclusion, selection of suitable soil mixtures and plants is possible extensive management rooftop greening with effect of continuous greening. The mat-type rooftop greening are lightweight and simple preparation without management and can popularize readily.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.85.1-85
• /
• 2003

In most ascomycetes, a single mating type locus, MAT, with two alternate forms (MAT1-1 and MAT1-2) called idiomorphs, controls mating ability. In heterothallic ascomycetes these alternate idiomorphs reside in different nuclei. In contrast, most homothallic ascomycetes carry both MAT1-1 and MAT1-2 in a single nucleus, usually closely linked. An example of the latter is Gibberella zeae, a producer of mycotoxins such as trichothecene and zearalenone that threaten human and animal health. We asked if G. zeae could be made strictly heterothallic by manipulation of MAT. Targeted gene replacement was used to differentially delete MAT1-1 or MAT1-2 from a wild type haploid MAT1-1 MAT1-2 strain, resulting in MAT1-1；mat1-2, mat1-1；MAT1-2 strains that were self-sterile, yet able to cross to wild type testers and more importantly, to each other. These results indicated that differential deletion of MAT idiomorphs eliminates selfing ability of G. zeae, but the ability to outcross is retained. To our knowledge, this is the first report of complete conversion of fungal reproductive strategy from homothallic to heterothallic by targeted manipulation of MAT. Practically, this approach opens the door to simple and efficient procedures for obtaining sexual recombinants of G. zeae that will be useful for genetic analyses of mycotoxin production and other traits, such as ability to cause disease.

• Mycobiology
• /
• 제44권4호
• /
• pp.269-276
• /
• 2016

Aspergillus luchuensis is known as an industrially important fungal species used for making fermented foods such as awamori and shochu in Japan, makgeolli and Meju in Korea, and Pu-erh tea in China. Nonetheless, this species has not yet been widely studied regarding mating-type genes. In this study, we examined the MAT1-1 and MAT1-2 gene ratio in black koji molds (A. luchuensis, Aspergillus niger, and Aspergillus tubingensis) and in Aspergillus welwitschiae isolated from Meju, a fermented soybean starting material for traditional soy sauce and soybean paste in Korea. The number of strains with the MAT1-1 locus was 2 of 23 (A. luchuensis), 6 of 13 (A. tubingensis), 21 of 28 (A. niger), and 5 of 10 (A. welwitschiae). Fungal species A. tubingensis and A. welwitschiae showed a 1 : 1 ratio of MAT1-1 and MAT1-2 mating-type loci. In contrast, A. luchuensis revealed predominance of MAT1-2 (91.3%) and A. niger of MAT1-1 (75%). We isolated and identified 2 A. luchuensis MAT1-1 strains from Meju, although all strains for making shochu in Japan are of the MAT1-2 type. These strains may be a good resource for breeding of A. luchuensis to be used in the Asian fermented-food industry.

• Journal of Microbiology and Biotechnology
• /
• 제15권3호
• /
• pp.502-509
• /
• 2005

Sexual reproduction plays an important role in the biology and epidemiology of oomycete plant pathogens such as the heterothallic species Phytophthora infestans. Recent worldwide dispersal of A2 mating type strains of P. infestans resulted in increased virulence, gene transfer, and genetic variation, creating new challenges for disease management. To develop a genetic assay for mating type identification in P. infestans, we used the Amplified Fragment Length Polymorphism (AFLP) technique. The primer combination E+AT/M+CTA detected a fragment specific to A1 mating type (Mat-A1) of P. infestans. This fragment was cloned and sequenced, and a pair of primers (INF-1, INF-2) were designed and used to differentiate P. infestans Mat-A1 from Mat-A2 strains. The Mat A1-specific fragment was detected using Southern blot analysis of PCR products amplified with primers INF-1 and INF-2 from genomic DNA of 14 P. infestans Mat-A1 strains, but not 13 P. infestans Mat-A2 strains or 8 other isolates representing several Phytophthora spp. Southern blot analysis of genomic DNAs of P. infestans isolates revealed a 1.6 kb restriction enzyme (EcoRI, BamHI, AvaI)-fragment only in Mat-A1 strains. The A1 mating type-specific primers amplified a unique band under stringent annealing temperatures of $63^{\circ}C-64^{\circ}C$, suggesting that this PCR assay could be developed into a useful method for mating type determination of P. infestans in field material.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.109-116
• /
• 2004

Normally easy task of plat in urban architecture is that using underground full of activities for increase building site efficiency. Especially for using underground space for the parking lot. Also utilize underground is more increase for fulfill requirement in modern society considered with environmental friendly architecture. The primary objective of this study is to apply analyzed formal foundation type for selecting the optimum type of parking lots considered with structural stability, economical efficiency, construction efficiency, construction duration. This study aim to on criteria decided through the questionaries for the selection considered with in the scale of second stories parking lots underground, parking volume is 80 and reinforced concrete structure. The bearing capacity is 6～8m and downward from surface, healthy ground bearing capacity is 40 t/m2. This study comparative analysis and discuss economical efficiency, construction efficiency, construction duration based constructivist stability which applied Single foundation, Mat foundation, Drop Mat foundation. The result of this study is as follows: First, the result of economical efficiency is that on the basis of single foundation, Drop Mat foundation is 1.88, Mat foundation 2.04 as a comparative analysis on the basis of total construction cost included material cost, labor coast and machinery cost. Second, the result of construction efficiency order is single foundation, Drop Mat foundation, Mat foundation as a comparative analysis on the based connected characteristics. Third, the result of construction duration is that on the basis of Mat Foundation, Drop Mat foundation is 1.33, single foundation is 1.87 as a comparative analysis Critical Path. Forth, Each foundational type characteristics order through the matrix method is that overall each formal type of foundation contraries at economical efficiency and construction efficiency, construction duration. Also expect contradiction between engineers and owners due to engineer pursuit construction duration and ewer to begin with economical efficiency. Fifth, The selection of suitable foundation formal type needs that based consider project characteristic and field condition as according to above result of a comparative analysis. As a result, a comparative analysis economical efficiency, construction efficiency, construction duration of Mat foundation, Drop Mat foundation, single foundation with 3Bay reinforced structure underground parking lots on the healthy ground.

• The Plant Pathology Journal
• /
• 제15권3호
• /
• pp.131-136
• /
• 1999

In fungi known as ascomycetes, ability to mate is controlled by a single mating type (MAT) locus with two dissimilar sequences called idiomorphs carrying genes encoding transcription factors that are unrelated to each other. Fungi requiring strains with different MAT genes to complete the sexual process are heterothallic (self-sterile); species in which as single strain is able to undergo sexual reproduction are homothallic (self-fertile). Previous analysis of sequences from several heterothallic and homothallic species of the ascomycete genus Cochliobolus showed that homothallics evolve from heterothallics and that each known Cochliobolus homothallic species arose independently, from a different heterothallic ancestral species. Here we report detailed comparative analyses of MAT sequences ad their flanking regions, and show that: (1) The level of MAT gene similarity is not correlated with reproductive life style; (2) MAT proteins from all Cochliobolus species are conserved within the transcription factor signature sequences; they are not conserved in the carboxy terminal half of MAT-1, or third of MAT-2, except in those from very closely related species; (3) A gene (ORF1) of unknown function, consistently found on the MAT flank, is more conserved than are the MAT genes themselves; (4) The intergenic sequences diverge sharply among species.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.48-57
• /
• 1979

In order to obtain a standard reference for designing an adequate power rice transplanter, the cutting forces depending upon variety of seedling, sowing density, seedling age and soil moisture content of mat-type seedling were measured by the rice transplanter installed with force measuring device of dynamic strain gage system in the laboratory. The result of this study are summarized as follows : 1. Cutting velocity and acceleration transplanting hoe obtained from jinematic analysis of planting mechanism was 1.32m/sec and 81.5m/$sec^2$ when planting crank-shaft rpm was 160. 2. Little difference between cutting forces on 30-days old seelings of japonica and Indica type was observed, as the cutting forces determined were 2.0kg per hill for Japonica type and 2.1kg per hill for Indica type. 3. Cutting forces determined on 40-days old seedlings were 2.5kg, 2.3kg, 3.1kg and 2.9kg per hill for Milyang No.15, Tongil, Akibare and Milyang No.23 compared to the other varieties. 4. The cutting force was not greatly affected by the sowing densities , only five percent of differences were observed epending upon the sowing densities. 5. Cutting forces were 2.7kg and 2.0kg per hill on 40-days old seedlings and 30-days old seedlings respectively. About 38 percent of more forces was required in cutting 40-days old seedling than in cutting 30-days old seedlings. 6. More cutting forces were required as soil moisture content of mat-type seedling was decreased. 7. Root length after cutting by the planting hoe and their relationships with soil moisture content on 30-days old seedlings, are as follows ; $y=4.147-11.384x+ 28.854x^2$ where , $y$=root length after cutting. (cm) , $x$=soil ture content of mat type seedlings.(%, d.b.) 8. Cutting forces were varied with the width of cuttings ; those on 40-days old mat type seedlings were 2.7kg and 2.2kg per hill when cutting with 14 mm and 10mm of width respectively, about 32 percent of more forces was required when cuting with 14mm of width compared to 10mm of width.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 춘계학술발표회
• /
• pp.33-33
• /
• 1997

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.74-84
• /
• 1995

Eight types of thin composite panels were manufactured by press-lam and mat-forming process applied to optimum manufacturing condition, studied in former first research by author (1995). They were tested and compared with control boards on dimensional stability, internal bond strength, tensile strength, Screw withdrawal strength, and bending properties. These thin composite panels manufactured by mat-forming process were generally superior to those by press-lam in dimensional stability and mechanical properties. In the dimensional stability and mechanical properties of thin composite panels manufactured by mat-forming process, the thin composite panels (A and E type) composed of particle or sawdust core and veneer face with polyethylene film, were as good as those of common plywood (control board). Internal bond strength showed highest value in the thin composite panel(D type) which composed of particle core and polypropylene screen face with polyethylene film. The thin composite panels(G and H type) composed of sawdust or particle core and polypropylene screen face with polyethylene film by press-lam and mat-forming process, showed most highest value in dimensional stability and water absorption.

• Mycobiology
• /
• 제46권1호
• /
• pp.64-71
• /
• 2018

The aim of this study was to investigate the pattern of distribution of mating type (MAT) genes of Tuber indicum in ectomycorhizosphere soils from natural T. indicum-producing areas and cultivated truffle orchards and ascocarp samples from different regions. Quantitative real-time PCR and multiplex PCR were used to weight the copy numbers of MAT1-1-1 and MAT1-2-1 in natural truffle soils and cultivated orchard soils. The effect of limestone on the pattern of truffle MAT genes and the correlation between soil properties and the proportion of MAT genes were also assessed. These results indicated that an uneven and nonrandom distribution of MAT genes was common in truffle-producing areas, cultivated truffle orchards, and ascocarps gleba. The competition between the two mating type genes and the expansion of unbalanced distribution was found to be closely related to truffle fructification. Limestone treatments failed to alter the proportion of the two mating type genes in the soil. The content of available phosphorus in soil was significantly correlated with the value of MAT1-1-1/MAT1-2-1 in cultivated and natural ectomycorhizosphere soils. The application of real-time quantitative PCR can provide reference for monitoring the dynamic changes of mating type genes in soil. This study investigates the distributional pattern of T. indicum MAT genes in the ectomycorhizosphere soil and ascocarp gleba from different regions, which may provide a foundation for the cultivation of T. indicum.