• Journal of Korea Foundry Society
• /
• v.29 no.3
• /
• pp.128-137
• /
• 2009

The effects of alloying elements on the mechanical properties of 3.6wt%C-2.6wt%C ductile cast iron poured into shell stack molds were investigated. The strength and hardness of the specimens obtained from the center layer in the 5-story stack mold were the lowest and those for other specimens were increased with increased distance from the center. The strength and hardness of the specimens obtained from the center layer were decreased with increased number of layers of the shell stack mold. The strength and hardness of the smaller specimens with the diameter of 9.5 mm were higher than those of 17.5 mm. On the other hand, the elongation of the former was lower than that of the latter. The strength and hardness were increased and the elongation was decreased roughly with the increased amounts of manganese and copper added, respectively. The strength and hardness were increased with the incrcased amount of molybdenum added to 0.40wt% and rather decreased with that to 0.80wt%. Those were greatly increased with the increased amount of tin added and the elongation was roughly decreased with it.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.117-125
• /
• 2003

IPv6 (IP version 6), which was standardized by the IETF (Internet Engineering Task Force) to cope with existing IPv4 problems, needs several approaches for interoperation with IPv4. The internetworking of IPv6 with IPv4 is an important key to the deployment of the next generation Internet. As the solutions to the transition mechanism, both tunneling and translator methods have been proposed. In this paper, we analyze functional elements for implementation design of a transition mechanism based on the NAT-PT (NAT-Protocol Translation), and propose an extension algorithm that uses ports for effective use of global IPv4 addresses. The algorithm presented in this paper is a method of combining NAT-PT with Port Translation mechanism. The algorithm does not assign an IPv4 address to the host that needs IPv4 address, but allocates a single temporary IPv4 address and a port number in order to identify host.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.55-63
• /
• 2013

In this study, a electrochemical-chemical combined dissolution technology was conducted by electro-generated chlorine to obtain ruthenium solution from ruthenium metal. To find out the optimum leaching conditions of ruthenium in chloride solution, this leaching process was carried out on the variation of pH, reaction time, temperature and applied voltage at the electro-generated chlorine system in the reaction bath. Also, ozone generator was used to obtain ruthenium(III) chloride solution to increase the leaching rate. The optimum condition was observed at pH 10.0, $40^{\circ}C$ within 1 hr of reaction time that more than 88% of ruthenium(III) chloride dissolved.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.447-455
• /
• 2010

The objective of this study was to analyze the difference in kinematic variables for successful and unsuccessful golf putting strokes. The study population included 8 male secondary school golf players who had played golf for over 3 years and whose handicap was 4 or lower. A hole was made on a 5-m-long artificial flat mat for practice, and an environment similar to that of a real green was created. The participants' motions were analyzed through 3D image analysis, and the difference in kinematic variables for successful and unsuccessful putting strokes in the same direction was determined. Data analysis revealed the following findings: The time spent for a segment of putting was the greatest for the backswing segment for both successful and unsuccessful strokes. During address and impact, the both changed to a larger extent. For successful putting strokes, the change in the elbow angle during the downswing was greater for the right elbow than for the left elbow. For both successful and unsuccessful putting strokes, the left shoulder angle increased during the segment from address to the turning point and decreased during the segment from the turning point to impact. In contrast, the right shoulder angle significantly differed between successful and unsuccessful putting strokes only during address. During successful and unsuccessful motions, the swing was executed with the moving displacement of the X-axis of the club head maintained almost constant along a straight light without back and forth movement. In the backswing segment, moving displacement of the Y- and Z-axes was greater in successful strokes than in unsuccessful strokes; however, this difference was very small for the Y-axis. The velocity of the club head for successful and unsuccessful motions significantly differed during address and at the turning point. The highest velocity of the ball was greater for successful than for unsuccessful putting strokes.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.58-65
• /
• 1997

This research was carried out to evaluate the effect of process variables on mechanical properties of the wood fiber-thermoplastic fiber composites by turbulent air mixing method. The turbulent air mixer used in this experiment was specially designed in order to mix wood fiber and thermoplastic polypropylene or nylon 6 fiber, and was highly efficient in the mixing of relatively short plastic fiber and wood fiber in a short time without any trouble. The adequate hot - pressing temperature and time in our experimental condition were $190^{\circ}C$ and 9 minutes in 90% wood fiber - 10% polypropylene fiber composite and $220^{\circ}C$ and 9 minutes in 90% wood fiber 10% nylon 6 fiber composite. Both in the wood fiber - polypropylene fiber composite and wood fiber- nylon 6 fiber composite, the mechanical properties improved with the increase of density. Statistically, the density of composite appeared to function as the most significant factor in mechanical properties. Within the 5~15% composition ratios of polypropylene or nylon 6 fiber to wood fiber, the composition ratio showed no significant effect on the mechanical properties. Bending and tensile strength of composite, however, slightly increased with the increase of synthetic fiber content. The increase of mat moisture content showed no significant improvement of mechanical properties both in wood fiber - polypropylene fiber composite and wood fiber nylon 6 fiber composite. Wood fiber - nylon 6 fiber composite was superior in th mechanical strength to wood fiber-polypropylene fiber composite, which may be related to higher melt flow index of nylon 6 fiber(22g/10min) than of polypropylene fiber(4.3g/10min).

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.223-231
• /
• 2010

Purpose : The Purpose of this study was to compare muscle activation and foot pressure on baby carrier and sling for baby care. Methods : Thirty one women subjects (mean age 23.2 years) participated in four static conditions : unloaded quite standing, carrying an anterior baby carrier, carrying a posterior baby carrier, and sling. The baby carrier and sling were loaded with baby model that filled 7.6kg loads. Surface electromyography was used to measure activity in the internal oblique, T4, L3, L5 paraspinal muscle, vastus medialis, biceps femoris, tibialis anterior, and gastrocnemius for four conditions. And foot pressure was measured by using MatScan system(Tekscan, USA). Results : The activation of Biceps femoris, T4, L3, and L5 paraspinal muscle were significant differences(p<.05), but other muscles were no significant differences in four conditions(p>.05). Right foot contact area and peak pressure of right mid foot area were significant differences in four conditions(p<.05). Conclusion : The results of this study indicate that the use of baby carrier of sling for baby care were influenced postural responses of young women. Further work is recommended to find out the influences of various assistive devices for baby care.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.67-72
• /
• 2019

This study compared the theory of a culvert spacing and analytical results of the seepage flow for the subsurface drainage. i) If culvert spacing (Sc) is within 5 m, the unit drainage (q) is very larger; in contrast, if Sc is 5 m or more, there is very little drainage in the middle between drains. Therefore, the drain spacing should be within 5 m to ensure high drainage efficiency. ii) Since the planned culvert drainage increases linearly with the soil's permeability coefficient (k), k must be taken into account when determining the drain diameter by the planned culvert drainage. iii) As a result of analyzing the drainage performance of the absorbing culvert, the drainage performance is sufficient with the diameter of the corrugated drain pipe Dc = 50 mm at the length of the drain Lc = 100 m. iv) Therefore, if the drain spacing (Sc) is less than 5 m using the low-cost non-excavated drainage pipe method (${\Phi}50mm$ the corrugated drain pipe and fiber mat) rather than the conventional trench drain method (Sc > 10 m, Dc > 100 mm), uniform and high drainage efficiency can be ensured as well as low construction cost. v) The sub-irrigation+drainage culvert requires narrower drain spacing (Sc < 2-3 m) for irrigation. As a result of examining the condition of 35 mm in diameter (Dc) and 2~3 m in drain spacing, it is possible to apply the non-excavated drainage pipe method to the sub-irrigation+drainage culvert because drainage performance is sufficient at the drain length Lc = 50 m.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.98-98
• /
• 2019

제니(薺苨, Adenophorae Remotiflori Radix)는 "대한민국약전외한약(생약)규격집(KHP)"에 모시대(Adenophora remotiflorus Miquel)의 뿌리로 수재되어있으나, 형태학적으로 유사한 잔대(A. triphylla), 당잔대(A. stricta) 및 더덕(Codonopsis lanceolata)과 오 혼용 우려가 있어 이들을 구별하기 위한 정확하고 객관적인 종 감별법이 필요하다. 본 연구에서는 '제니'의 기원인 모시대와 오 혼용 우려가 있는 종들을 구별 할 수 있는 유전자 마커를 개발하기 위하여 Genbank에 등록된 ycf2 구간을 활요하여 모시대와 잔대, 당잔대를 구분 할 수 있는 INDEL (insertion/deletion) 마커를 개발하였다. 또한, 보다 정확한 종감별을 위해 DNA 바코드로 활용되고 있는 유전자 부위의 염기서열을 분석하여 ITS (25%), atpB-rbcL (15%), atpF-atpH (14%), rpl16 (13%), trnL-F (10%), matK (9%), rpoC1 (7%)에서 변이율(percent of variable sites)을 확인하였다. 향후, 본 연구에서 개발된 INDEL 마커와 더불어 추가적으로 개발을 진행 중인 분자 마커는 한약재 '제니'의 품질관리에 활용 가능할 것으로 사료된다.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.578-585
• /
• 2015

Track elastic components can be technically and economically efficient when integrated well into track superstructure of a railway network. In such cases, the elastic rail pad is larger than a 800m radius curve provides smooth rail branching and allows for high-speed operation ($V{\geq}160km/h$). High track resistance causes the tamping intervals to stand out because the constantly increasing share of the sleeper pad further extends the increase of the tamping interval and the long grinding period; the engineering and construction of the small curve radius track provides some measures for reducing the solid sounds. Installation of elastic mats under the ballast can have a good effect, particularly in the context of protection against dust during construction or extensive renovation measures when laying new lines. However, such a process requires special attention and proper installation.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.850-855
• /
• 2009

Keratin is an important protein used in wound healing and tissue recovery. In this study, keratin was modified chemically with iodoacetic acid (IAA) to enhance its solubility in organic solvent. Poly(hydroxybutylate-co-hydroxyvalerate) (PHBV) and modified keratin were dissolved in hexafluoroisopropanol (HFIP) and electrospun to produce nanofibrous mats. The resulting mats were surface-characterized by ATR-FTIR, field-emission scanning electron microscopy (FE-SEM) and electron spectroscopy for chemical analysis (ESCA). The pure m-keratin mat was cross-linked with glutaraldehyde vapor to make it insoluble in water. The biodegradation test in vitro showed that the mats could be biodegraded by PHB depolymerase and trypsin aqueous solution. The results of the cell adhesion experiment showed that the NIH 3T3 cells adhered more to the PHBV/m-keratin nanofibrous mats than the PHBV film. The BrdU assay showed that the keratin and PHBV/m-keratin nanofibrous mats could accelerate the proliferation of fibroblast cells compared to the PHBV nanofibrous mats.