• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2202-2209
• /
• 2009

모관과 지관의 다양한 접합형상에 대하여 접합궤적을 수학적으로 유도하였다. 이 접합궤적에 용접부의 루트갭 및 절단폭 등을 보정하여 실제적으로 절단궤적을 결정하여 NC 코드를 생성하고 그 경로를 확인하기 위하여 ghost 기능을 구현하였다. 척회전인 C축의 8개 구간별로 A, B축의 Tilting을 사용하여 개선 기능을 구현하였으며, 이는 절단궤적을 따라서 절단하면서 동시에 개선이 가능하도록 6축 CNC 파이프 코스터 전용 CAM 프로그램을 개발하였다.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1219-1230
• /
• 2004

Comparing to the gravimetric and volumetric method, the flowmeter calibration based on the master meter method is relatively economical and convenient, especially for high flowrate. The uncertainty of flow quantity and flowrate using the master meter method was evaluated according to the GUM (Guide to the Expression of Uncertainty in Measurement). In order to apply for the wider flow range, two master meters (electromagnetic flow meter) were employed as reference flowmeters. The uncertainty of the master meter was obtained by combining the statistical variation of the repeated measurements and the variation of fluid density and pipe material due to temperature and pressure changes were scrutinized. for a practical application, the uncertainty of calibrator, whose measuring capacity of 1000 ㎥/h obtained by employing two 500 ㎥/h electromagnetic How meters, was evaluated. The uncertainty budget shows the quantitative contribution of each uncertainty component to the overall uncertainty of the calibrator. As a result, it was found that the dominant uncertainties were from the master meter, which was evaluated statistically, and from the process of least squares fitting. On the contrary, the uncertainties arising from the variation of the fluid density and the pipe volume due to the temperature and pressure were negligible.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.133-140
• /
• 2007

기존의 상업적인 3D CG 애니메이션 제작 공정 구조는 부서간의 병목현상으로 모든 부서가 동시에 작업을 할 수 있는 효율적인 구조로 이루어지지 않고 있다. 예를 들어, 애니메이팅 작업을 하기 위해선 선행되어야 할 모델링과 Set-Up 단계가 끝나기 전에는 애니메이팅 작업을 할 수가 없다. 그 결과, 제작 일정의 지연, 제작비의 손실을 발생시키게 되고, 또한 선행된 작업에 수정을 가할 경우 수정이 끝날 때 까지 애니메이팅 작업은 중단된다는 결과를 야기 시킨다. 이런 문제는 표준으로 정해 놓은 "마스터 캐릭터"의 적용으로 도움을 줄 수가 있는데, 프로젝트의 시작과 동시에 모델링과 set-up 그리고 다른 어떤 작업과도 독립적으로 애니메이팅 작업을 시작 할 수 있고 수정 작업도 독립적으로 수행이 가능해서 애니메이션 제작공정을 효율적으로 관리할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.819-824
• /
• 2007

Outfitting system in ship design has huge kinds of standard part. Data base of and automatic design procedure of part master should be included in ship cad in order to reduce the design time. Present study shows an process of part master DB construction of pipe equipments using 3-dimensional CAD environment Attribute and properties of part masters are chosen from JIS standard. As the schema of part masters are stored in data base, 3D geometric model is parsed from the schema.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3066-3073
• /
• 2009

3축 파이프 형상절단기에서 다양한 접합형상에 대하여 모관과 지관의 접합궤적을 수학적으로 유도하였다. 그 접합궤적에 절단폭 등의 공구 보정하여 실제로 가공할 절단궤적을 결정하여 이 공구궤적에 해당하는 CL-data를 생성하고, 또한 공구 궤적을 확인하기 위하여 ghost 기능을 구현하였다. 생성된 CL data를 PLC의 위치결정제어 모듈에 로딩하여 동시 3축($\alpha$, X, $\beta$축)의 이송을 제어하여 경로를 따라서 형상절단과 동시에 개선을 할 수 있도록 동시3축 파이프 형상절단 시스템을 개발하였다.

• 한국CDE학회논문집
• /
• 제15권1호
• /
• pp.60-69
• /
• 2010

Outfitting systems in marine vessels have many kinds of standard parts. Ship CAD system should support the designers with an efficient tool for the modeling of outfitting parts such as pipes and valves. We develop a practical procedure for a part master model that combines ship CAD systems with the industrial standard. Part master or catalogue database of standard equipments is included in the database of ship CAD. The part master makes the associations of three dimensional modeling with the industrial standard. Moreover, it reflects the automatic modeling to maintain attributes that are disclosed in the entity of each part master in order to reduce the modeling time. Entity and attributes of pipe and valves are chosen from JIS(Japanese Industrial Standards) in order to explain the proposed procedure. Suggested procedure explains that three dimensional model of equipment is generated by parsing the pre-defined attributes after the entities of part masters is stored in database.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1139-1146
• /
• 2006

Light Oil Flow Standard System(LOFSS) in Korea Research Institute of Standards and Science(KRISS) was designed for oil flowmeter calibration. In order to extend the flow range from 120 $m^3/h$ to 200 $m^3/h$, the build-up technique was applied with two positive displacement flowmeters as master flowmeter. The master flowmeters were calibrated against with LOFSS, which has 0.04 % uncertainty of flow quantity determination, then the test flowmeter is calibrated against two master flowmeters. For uncertainty analysis, the repeatability of master flowmeters, the variation of the fluid density and the pipe volume due to temperature change were scrutinized. The contribution of each uncertainty factors to the calibrator and the correlation of each factors were discussed. For investigating the feasibility of uncertainty analysis, a turbine flowmeter as a transfer package was tested with LOFSS and two reference flowmeter. The hypothesis test for both results was coincide with a 95 % significant level. This means that the uncertainty analysis procedure of the calibrator is reasonable and the extension of flow range with master meters was carry out successfully.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.868-880
• /
• 2020

One of the main concerns in the structural integrity of offshore pipelines is mechanical damage from external loads. Pipelines are exposed to fatigue failure in welded joints due to geometric discontinuity. In addition, fatigue loads such as currents, waves, and platform motions may cause significant plastic deformation and fracture or leakage within a relatively low-cycle regime. The 2007 ASME Div. 2 Code adopts the master S―N curve for the fatigue evaluation of welded joints based on the mesh-insensitive structural stress. An extension to the master S―N curve was introduced to evaluate the low-cycle fatigue strength. This structural strain method uses the tensile properties of the material. However, the monotonic tensile properties have limitations in describing the material behavior above the elastic range because most engineering materials exhibit hardening or softening behavior under cyclic loads. The goal of this study is to extend the cyclic stress-strain behavior to the structural strain method. To this end, structural strain-based procedure was established while considering the cyclic stress-strain behavior and compared to the structural strain method with monotonic tensile properties. Finally, the improved prediction method was validated using fatigue test data from full-scale girth-welded pipes.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1448-1459
• /
• 2023

A key element of the safety analysis is Loss of Coolant Analysis (LOCA) which must be performed using system thermal-hydraulic codes. These codes are extensively validated against separate effect and integral experiments. RELAP/SCDAPSIM is one such code that may be used to predict LBLOCA response in a CANDU reactor. The RD-14M experiment selected for the Best Estimate Plus Uncertainty study is a 44 mm (22.7%) inlet header break test with no Emergency Coolant Injection. This work has two objectives first is to simulate pipe break with RELAP and compare these results to those available from experiment and from comparable TRACE calculations. The second objective is to quantify uncertainty in the fuel element sheath (FES) temperature arising from model coefficient as well as input parameter uncertainties using Integrated Uncertainty Analysis package. RELAP calculated results are found to be in good agreement with those of TRACE and with those of experiments. The base case maximum FES temperature is 335.5 ℃ while that of 95% confidence 95^th percentile is 407.41 ℃ for the first order Wilk's formula. The experimental measurements fall within the predicted band and the trends and sensitivities are similar to those reported for the TRACE code.

• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.712-719
• /
• 2008

Light Oil Flow Standard System(LOFSS), as a national oil flow standard system, in Korea Research Institute of Standards and Science(KRISS) was developed for oil flowmeter calibration, and the expanded uncertainty of flow quantity determination was estimated within 0.04 %. In order to improve the reliability of the LOFSS measurement, a proficiency test was carried out in the flow range of 20 and $240\;m^3/h$ (Reynolds number $20,000{\sim}900,000$). A turbine flowmeter was used as a transfer package in round robin test. The water flow standard system of KRISS, the pipe prover of the national calibration and test organization and the master meter calibrator of the turbine flowmeter supplier, which used the different working fluid respectively, were compared with the turbine flowmeter measurement. The maximum difference of measurement was 0.15 % between the LOFSS and the pipe prover. The En numbers of the each system measurement were evaluated at the same Reynolds number. It was found that the En numbers were less than 1 in the comparison, which means the procedures of the uncertainty estimation of the each calibrators were reasonable and reliable.