• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.61-71
• /
• 1993

The stress waves generated by the mechanical energies by impact or the chemical energies by the explosions are transmitted through medium. The wave propagation process through medium is a very complicated procedure due to the reflections and refractions of the waves at the free surfaces and interfaces. In this study the pressure independent Von-Mises model is employed for the wave propagation analysis in the layered systems. Governing equations of this study are conservation equations of momentum and mass in Lagrangian coordinate system which is fixed to the material. Due to the shock-front which violates the continuity assumptions inherent in the differential equations numerical artificial viscosity is used to spread the shock front over several computational zones. These equations are solved by Finite Difference Method with discretized time and space coordinates. The associate normality flow rule as a plastic theory is implemented to find the plastic strains.

• Journal of Forest and Environmental Science
• /
• v.37 no.4
• /
• pp.323-330
• /
• 2021

Zygotic embryo culture was performed to propagate evergreen oak, Quercus myrsinifolia, which has recalcitrant seeds and is difficult to propagate by cuttings. Zygotic embryos appeared in WPM medium after 14 days, and after 56 days, they developed into complete plants with cotyledons and roots. The medium suitable for zygotic embryo culture was 1/4 WPM medium, showing a shoot growth of 2.43 cm and root growth of 8.7 cm after 8 weeks of culture. As a result of investigating the effect of GA₃ on the growth of plants germinated from zygotic embryos through GA₃ treatment, the best growth was shown in 0.5 mg/l GA₃ treatment. The in vitro rooting and growth of IBA-treated zygotic embryo-derived plants were good in the 0.5 mg/l IBA treatment and rooting and shoot growth were not observed at higher concentrations. And the callus induction rate also increased as the concentration of IBA increased. Plants grown in vitro were transferred to a plastic pot containing artificial soil and acclimatized in a greenhouse for about 4 weeks, resulting in more than 90% survival. As a result of this study, the zygotic embryo culture method was confirmed to be effective for mass propagation of Q. myrsinifolia. The results of this study are expected to contribute significantly to the mass propagation of elite Q. myrsinifolia.

• Journal of Plant Biotechnology
• /
• v.38 no.3
• /
• pp.221-227
• /
• 2011

This study was carried out to determine optimal medium conditions for mass propagation by bioreactor culture of ever-bearing strawberry (Fragaria ${\times}$ ananassa D.). Two different type of nitride were that mixed $NH_4NO_3$ and $KNO_3$ or added $KNO_3$ only. And nitride concentrations were at the 4 levels of $1/2{\times}$, $1{\times}$, $2{\times}$ and $3{\times}$ that was included $NH_4NO_3$ and $KNO_3$. Sucrose content ranged at 3 levels of $10g{\cdot}L^{-1}$, $20g{\cdot}L^{-1}$ and $30g{\cdot}L^{-1}$ and medium pH were at the 3 levels of 4.6, 5.6 and 6.6. In bioreactor culture, medium that are included $NH_4NO_3$ and $KNO_3$ together in MS medium was suitable for mass propagation. Medium EC rose rapidly when the nitride concentration was increased. For that reason, plantlet growth was inhibited. Shoots of nitride $1/2{\times}$ concentration was 10.8 ea and $1/2{\times}$ concentration was suitable for shoot propagation. Fresh weight of sucrose $30g{\cdot}L^{-1}$ was 3,101 mg which was heaviest and aerial and ground part were higher than the other concentration. Shoots were increased in proportion to the increasing concentration of sucrose. In the pH condition, from pH 5.6 to 6.8 were appropriate for the optimum growth of aerial and ground part of plant. From the results, in bioreactor culture for mass propagation, MS medium was suitable $1/2{\times}$ concentration that was included $NH_4NO_3$ and $KNO_3$ together, and added $30g{\cdot}L^{-1}$ of sucrose, and then adjusted pH between 5.6 and 6.6.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.30-39
• /
• 2006

Feasibility is studied for an application of the mass-spring lattice model (MSLM), a numerical model previously developed for unidirectional composites, to the numerical simulation of ultrasonic inspection of austenitic welds modeled as transversely isotropic. Fundamental wave processes, such as propagation, reflection, refraction, and diffraction of ultrasonic waves in such an inspection are simulated using the MSLM. All numerical results show excellent agreement with the analytical results. Further, a simplified model of austenitic weld inspection has been successfully simulated using the MSLM. In conclusion, a great potential of the MSLM in numerically simulating ultrasonic inspections of austenitic welds has been manifested in this work, though significant further efforts will be required to develop a model with field practicality.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.6
• /
• pp.649-658
• /
• 2002

As an attempt to further improve the reliability and effectiveness of ultrasonic testing (UT), a two-dimensional numerical simulator of UT was developed. The simulator models the wave medium (or test object) using the mass-spring lattice model (MSLM) that consists of mass-points and springs. Some previous simulation results, obtained by using MSLM, are briefly reviewed in this paper, for propagation, reflection, and scattering of ultrasonic waves. Next, the models of transmitting and receiving piezoelectric transducers are introduced with some numerical results, which is a main focus of this paper. The UT simulator, established by combining the transducer models with the MSLM, was used to simulate many UT setups. In this paper, two simple setups are considered as examples, and their simulated A-scan signals are discussed. The potential of the MSLM, transducer models, and the UT simulator developed in this study to be used in the actual UT is confirmed.

• Korean Journal of Plant Resources
• /
• v.14 no.1
• /
• pp.53-59
• /
• 2001

This study was carried out to investigate mass propagation technique by using seed and vegetative propagation of Kalopanax pictus Nakai. For developing seed propagation, seed stratification and 1$0^{\circ}C$ after-ripening treatment induced embryo growth within 1 weeks, resulted in increasing germination rate of seeds up to more than 65% when planted. The softwood cutting using one year old shoot increased rooting rate to 69% whereas more than 1 year old shoot looked like inappropriate for cutting propagation. In the cutting timing, the rooting rate on June, 13 cutting of the first growth shoot was the highest, followed by June 20 and July 4. The most efficient cutting timing seemed to be the middle of June. When cutted shoots were soaked for 30 minute with IBA and NAA 1000mg.$L^{-1}$, rooting rate was increased above 70%. As the concentrations of plant hormone were increased above 2000mg.$L^{-1}$, the rooting rate was slowly decreased.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.331-335
• /
• 2018

Zantedeschia spp. calla is very popular as a cut flower. It is very important to establish a micro propagation system through plant tissue culture with the problem that colored calla with various colors are low in natural reproduction rate and vulnerable to high temperature. In this study, we conducted the experiment by adding taurine to improve the growth of calla plant. When 20 mg/L of taurine was added with plant growth effect, 54.0 % of the cases of multiple shoots and 17.2 times of fresh weight were the most effective. Taurine 20 mg/L treatment showed 16.0 % and 39.2 %, respectively, than the untreated control. Taurine may contribute to mass propagation of elite breeding lines as well as an improvement of farm income by positively influencing the overall growth of calla plants, thereby positively affecting the establishment of the micro propagation system of calla shoot tips.

• Earthquakes and Structures
• /
• v.6 no.5
• /
• pp.473-494
• /
• 2014

Progressive collapse, which is referred to as the collapse of the entire building under local damages, is a common failure mode happened by earthquakes. The collapse process highly depends on the whole structural system. Since, asymmetry of the building plan leads to the local damage concentration; it may intensify the progressive collapse mechanism of asymmetric buildings. In this research the progressive collapse of regular and irregular 6-story RC ordinary moment resisting frame buildings are studied in the presence of the earthquake loads. Collapse process and collapse propagation are investigated using nonlinear time history analyses (NLTHA) in buildings with 5%, 15% and 25% mass asymmetry with respect to the number of collapsed hinges and story drifts criteria. Results show that increasing the value of mass eccentricity makes the asymmetric buildings become unstable earlier and in the early stages with lower number of the collapsed hinges. So, with increasing the mass eccentricity in building, instability and collapse of the entire building occurs earlier, with lower potential of the progressive collapse. It is also demonstrated that with increasing the mass asymmetry the decreasing trend of the number of collapsed beam and column hinges is approximately similar to the decreasing trend in the average story drifts of the mass centers and stiff edges. So, as an alternative to a much difficult-to-calculate local response parameter of the number of collapsed hinges, the story drift, as a global response parameter, measures the potential of progressive collapse more easily.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.75-82
• /
• 2004

With an aim at eliminating the numerical dispersion error arising from the numerical simulation of stress wave propagation, numerical dispersion characteristics of the wave equation based one-dimensional finite element model are analyzed and some dispersion control scheme are proposed in this paper The dispersion analyses are carried out for two types of mass matrix, namely the consistent and the lumped mass matrices. Based on the finding of the analyses, dispersion correction techniques are developed for both the implicit and explicit schemes. For the implicit scheme, either the weighting factor for the spatial derivatives of each time level or the lumping coefficient for mass matrix is adjusted to minimize the numerical dispersion. In the case of the explicit scheme an artificial dispersion term is introduced in the governing equation. The validity of the dispersion correction techniques proposed in this study is demonstrated by comparing the numerical solutions obtained using the Present techniques with the analytical ones.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.719-725
• /
• 2009

This study was conducted to establish the optimal condition for acclimatization from somatic embryos of Eleutherococcus seoulensis. Torpedo-shaped embryos of Eleutherococcus seoulensis were cultured on 1/3 MS and WPM media supplemented with $GA_3$ (3.0, 5.0 mg/L) for 4 weeks. Plentlets were transferred to 1/2 SH solid medium with 1.0 mg/L $GA_3$ and 0.2% activated charcoal for shoot and root elongation and them elongated plantlets further developed on 1/2 SH medium for 4 weeks. Developed plantlets further elongated into well-shaped leaf and root system on 1/3 SH medium under ventilation condition for 4 weeks. Plantlets grew normally on 1/3 SH basal medium, were acclimated on various soil. Survival frequency of plantlets was influenced by soil type(peatmoss+perlite, perlite, soil on Nam mountain). The highest survival rate to soil was more than 70% when plantlets were 1/3 SH medium under ventilation condition in Nam mountain soil. These results indicate that the systematic procedure of plant production in Eleutherococcus seoulensis could be practically applicable for mass propagation.