• KSBB Journal
• /
• 제4권2호
• /
• pp.118-122
• /
• 1989

Candida utilis를 model균주로 하여 세포증식과 기질소모를 on-line 간접측정하고자 개인용 컴퓨터(IBM PC-AT)와 interface된 quadrupole mass spectrometer로 발효 배기가스를 분석하였다. 5분마다 연속적으로 분석되는 질소, 산소, 이산화 탄소 및 수증기의 mole백분율(%)로부터 산소 소비속도(OUR)와 이산화 탄소 발생속도(CER)를 on-line으로 계산하였다. 미리 실험 결과치로부터 결정한 maintenance와 수율 상수들($k_1k_2 $ 값을 이용하여 세포농도와 기질인 포도당의 농도를 on-line으로 간접추정하였다. 간접추정된 값들은 실험적으로 측정한 세포농도 및 기질농도와 잘 일치함을 알 수 있었다.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.253-258
• /
• 2001

Crosslinked poly(ethylene glycol)s (PEGs) were prepared by ultraviolet irradiation of low molar mass, liquid PEGs in the presence of benzophenone (BP) as a photoinitiator. The networks obtained have been characterized by DSC, IR, and contact angle measurements, and their water absorption and equilibrium swelling have been examined. The percent of gel formed and degree of swelling of the networks in water were dependent on the amount of BP in the reaction mixture, irradiation time and molar mass of PEG. Gel fraction yield exceeded 84%, and equilibrium swelling in water varied from 49 to 244%.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.291-294
• /
• 2006

Studies of the effectiveness of anthraquinone (AQ) in kraft-AQ pulping in terms of its mechanism of mass transfer have been conducted. Experiments performed have demonstrated an 'apparent solubility' of AQ in caustic solutions of wood lignin. The adsorption behavior of AQ species was also analyzed. Anthraquinone-2-sulfonic acid (AQ-S), a water-soluble derivative of AQ, showed selective adsorption on wood. A mechanism for the transport of AQ into wood chips during kraft pulping are proposed, and some explanations for previously unexplained observations are addressed.

• Mass Spectrometry Letters
• /
• 제14권1호
• /
• pp.1-8
• /
• 2023

Eutylone, dibutylone, and dimethylone are potential psychotropic designer drugs. The purpose of this study was to investigate the in vitro metabolic pathways of synthetic cathinones with methylenedioxy groups. The three methylenedioxy derivatives were incubated with human liver microsomes. The metabolites were characterized based on liquid chromatography and quadrupole-time-of-flight mass spectrometry. Eutylone, dibutylone, and dimethylone were metabolized to yield three, six, and four metabolites, respectively. Reduction and demethylenation were the major metabolic pathways for all three drugs tested. However, dibutylone and dimethylone showed an additional metabolite generated via N-oxidation. These results provide evidence for the in vivo metabolism of methylenedioxy synthetic cathinones, and could be applied to the analysis of synthetic cathinones and their relevant metabolites in biological samples.

• 대한환경공학회지
• /
• 제32권8호
• /
• pp.747-753
• /
• 2010

본 연구는 바이오필터의 기질분해특성을 파악하기 위하여 휘발성유기화합물을 대상으로 임계부하량과 기질특성의 상관관계를 분석하였고, 탄소물질수지를 이용한 생물반응의 양론적 해석을 수행하였다. 반응기에 공급된 기질은 단일물질이며, toluene, styrene, MEK, MIBK를 선정하였다. 바이오필터의 기질임계부하량은 toluene은 $46.9\;g/m^3{\cdot}hr$, styrene은 $25.8\;g/m^3{\cdot}hr$, MEK는 $96.3\;g/m^3{\cdot}hr$, MIBK는 $66.5\;g/m^3{\cdot}hr$이었으며, 임계부하량은 옥탄올-물 분배계수(KOW)와 높은 상관관계를 보였다. 또한 기질부하량이 증가할수록 물질수지 중 $CO_2$에 의한 탄소회수율은 낮아졌고, 바이오매스에 의한 탄소회수율은 높아지는 경향을 보였다. 생물양론적 해석을 통하여 추정된 biomass yield (g biomass/g substrate)는 기질부하량이 증가할수록 커졌으며, toluene은 0.31~0.57, styrene은 0.29~0.57, MEK는 0.08~0.56, MIBK는 0.14~0.53의 변화폭을 보였다.

• Environmental Engineering Research
• /
• 제22권1호
• /
• pp.19-30
• /
• 2017

Direct catalysis of vapors from vacuum pyrolysis of biomass was performed on MCM-41 to investigate the effects of operating parameters including catalyzing temperature, catalyzing bed height and system pressure on the organic yields. Optimization of organic phase yield was further conducted by employing response surface methodology. The statistical analysis showed that operating parameters have significant effects on the organic phase yield. The organic phase yield first increases and then decreases as catalyzing temperature and catalyzing bed height increase, and decreases as system pressure increases. The optimal conditions for the maximum organic phase yield were obtained at catalyzing temperature of $502.7^{\circ}C$, catalyzing bed height of 2.74 cm and system pressure of 6.83 kPa, the organic phase yield amounts to 15.84% which is quite close to the predicted value 16.19%. The H/C, O/C molar ratios (dry basis), density, pH value, kinematic viscosity and high heat value of the organic phase obtained at optimal conditions were 1.287, 0.174, $0.98g/cm^3$, 5.12, $5.87mm^2/s$ and 33.08 MJ/kg, respectively. Organic product compositions were examined using gas chromatography/mass spectrometry and the analysis showed that the content of oxygenated aromatics in organic phase had decreased and hydrocarbons had increased, and the hydrocarbons in organic phase were mainly aliphatic hydrocarbons. Besides, thermo-gravimetric analysis of the MCM-41 zeolite was conducted within air atmosphere and the results showed that when the catalyst continuously works over 100 min, the index of physicochemical properties of bio-oil decreases gradually from 1.15 to 0.45, suggesting that the refined bio-oil significantly deteriorates. Meanwhile, the coke deposition of catalyst increases from 4.97% to 14.81%, which suggests that the catalytic activity significantly decreases till the catalyst completely looses its activity.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.370-375
• /
• 2016

Tensile tests and creep tests were carried out at high temperatures on an Al-$Al_4C_3$ alloy prepared by mechanical alloying technique. The material contains about 2.0% carbon and 0.9% oxygen in mass percent, and the volume fractions of $Al_4C_3$ and $Al_2O_3$ particles are estimated at 7.4 and 1.4%, respectively, from the chemical composition. Minimum creep rate decreased steeply near two critical stresses, ${\sigma}_{cl}$ (the lower critical stress) and ${\sigma}_{cu}$ (the upper critical stress), with decreasing applied stress at temperatures below 723 K. Instantaneous plastic strain was observed in creep tests above a critical stress, ${\sigma}_{ci}$, at each test temperature. ${\sigma}_{cu}$ and ${\sigma}_{ci}$ were fairly close to the 0.2% proof stress obtained by tensile tests at each test temperature. It is thought that ${\sigma}_{cl}$ and ${\sigma}_{cu}$ correspond to the microscopic yield stress and the macroscopic yield stress, respectively. The lower critical stress corresponds to the local yield stress needed for dislocations to move in the soft region within subgrains. The creep strain in the low stress range below 723 K arises mainly from the local deformation of the soft region. The upper critical stress is equivalent to the macroscopic yield stress necessary for dislocations within subgrains or in subboundaries; this stress can extensively move beyond subboundaries under a stress above the critical point to yield a macroscopic deformation. At higher temperatures above 773 K, the influence of the diffusional creep increases and the stress exponent of the creep rate decreases.

• Journal of Microbiology and Biotechnology
• /
• 제17권6호
• /
• pp.952-959
• /
• 2007

His-His-Leu (HHL), a tripeptide derived from a Korean soybean paste, is an angiotensin-I-converting enzyme (ACE) inhibitor. We report here a method of producing this tripeptide efficiently by expressing tandem multimers of the codons encoding the peptide in E. coli and purifying the HHL after hydrolysis of the peptide multimers. The HHL gene, tandemly multimerized to a 40-mer, was ligated with ubiquitin as a fusion gene (UH40). UH40 was inserted into vector pET29b; the UH40 fusion protein was then produced in E. coli BL21. The recombinant UH40 protein was purified by cation-exchange chromatography with a yield of 17.3mg/l and analyzed by matrixassisted laser desorption ionization (MALDI) time-of-flight (TOF) mass spectrometry and protein N-terminal sequencing. Leucine aminopeptidase was used to cleave a 405-Da HHL monomer from the UH40 fusion protein and the peptide was purified using reverse-phase high-performance liquid chromatography (HPLC) on a C18 HPLC column, with a final yield of 6.2mg/l. The resulting peptide was confirmed to be HHL with the aid of MALDI-TOF mass spectrometry, glutamine-TOF mass spectrometry, N-terminal sequencing, and measurement of ACE inhibiting activity. These results suggest that our production method is useful for obtaining a large quantity of recombinant HHL for functional antihypertensive peptide studies.

• Parasites, Hosts and Diseases
• /
• 제35권3호
• /
• pp.149-154
• /
• 1997

저장 곡류 해충으로 알려져 있는 긴털가루진드기(rophnwpkescentios)가 우리 나라 가옥 내 집먼지 서식 진드기류 중 제 3의 우점종으로 밝혀짐에 따라 알레르기성 질환을 야기하는 원인 항원으로 작용할 가능성이 높아져 연구의 대상이 되고 있다. 본 연구에서는 진단, 치료 및 면역학 적 연구에 필요한 다량의 항원을 공급하기 위하여 대량 사육방법의 개발을 시도하여 다음과 같은 결과를 얻었다. 긴털가루진드기를 대량 사육하는데 가장 적합한 사육배지로는 실험동물사료 분말 로 사육 10주 후 1,251.5배의 개체 증가를 보였고 효소분말과 실험동물 사료분말의 혼합배지 (1 : 1)에서도 사육 10주 후 1.203.1배의 개체 증가를 보여 거의 같은 성적을 보였다. 사육조건으 로 가장 적합한 온도와 상대습도는 $25^{\circ}C$. 64% RH로서 9주 후 960배로 가장 높은 증식결과를 보였고, $^25{\circ}C$와 75% RH에서도 935.4배의 개체 증가로 거의 동일한 결과를 나타냈다 사육용기 표면적을 $79{\;}cm^2,{\;}154{\;}cm^2{\;}및{\;}227{\;}cm^2$로 사육 비교한 결과 각각 860.8배. 924.6배 및 1,250.8 배의 개체 증가를 보여 현저한 차이는 보이지 않았다.

• 한국방재학회 논문집
• /
• 제7권1호통권24호
• /
• pp.67-72
• /
• 2007

본 연구에서는 토사에 대한 질량보존의 법칙을 이용하여 자연유역 내 토양의 침식 및 퇴적 잠재능을 산정할 수 있는 모델을 개발하였다. 이 프로그램은 각 셀 별 토사에 대한 질량보존의 법칙을 적용하여 GIS환경하에서 구동 가능하도록 구성되어있으며 셀 별 토사발생량은 RUSLE 공식을 이용하여 산정하였다. 토양의 침식 및 퇴적 잠재능은 토사의 유출량과 유입량의 차에 의해 각 셀이 침식되거나 퇴적된다는 질량보존의 법칙을 이용하여 산정하였다. 질량보존의 법칙을 적용하기 위한 셀 별 토사유출량은 토사발생량과 토사전달률을 곱하여 산정하였으며 이 토사 유출량이 흐름방향 알고리즘에 의해 결정되는 하류 셀의 토사유입량이 된다. 본 연구에서 개발된 모델을 이용하여 국내 소유역에 대해 적용하였으며 그 결과를 실측치와 비교함으로써 모델을 검증하였다.