• Journal of Microbiology and Biotechnology
• /
• 제11권6호
• /
• pp.1055-1060
• /
• 2001

Experimental data for the on-line estimation of cell concentration and growth rate are presented. For this purpose, we utilized the on-line calculation of the oxygen uptake rate (OUR), which was derived from a liquid phase dynamic mass balance for the oxygen during the active growth phase in cyclosporin A (CyA) fermentation. The cell yield coefficient, based on the oxygen $(Y_{x/o})$for both suspended and immobilized cells of Tolypocladium inflatum, was estimated as $1.9 gDCW/gO_2$ from a very good linear correlation between the cell mass produced and the total oxygen consumed. The calculated yield showed a good agreement with the value of $(Y_{x/o})$ generated from the correlation between the cell growth rate and the oxygen uptake rate. In addition, further experimental data are given, which were also applied to determine the specific oxygen uptake rate of T. inflatum cells during the exponential phase of CyA fermentation. A theoretical basis for the analysis of these fermentation parameters is also provided.

• Natural Product Sciences
• /
• 제24권1호
• /
• pp.71-78
• /
• 2018

The present study deals with the determination of optimal values of operating parameters such as the temperature of heating, the mass of the plant material and the volume of water leading to the best yield of electromagnetic induction (EMI) heating extraction of Algerian Thymus fontanesii essential oil. After an appropriate choice of the three critical variables, eight experiments leaded to a mathematical model as a first-degree polynomial presenting the response function (yield) in the relation to the operating parameters. From the retained model, we were able to calculate the average response, the different effects and their interactions. The maximum of essential oil recovery percentage relative to the initial mass of plant material was 1.69%, and was obtained at ($140^{\circ}C$, 250 g and 4.5 L). The chemical composition of the Algerian T. fontanesii essential oil under the obtained optimal conditions ($140^{\circ}C$, 250 g and 4.5 L), determined by GC/MS and GC/FID, reveled of the presence of major components such as: carvacrol ($70.6{\pm}0.1%$), followed by p-cymene ($8.2{\pm}0.2%$).

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• Mass Spectrometry Letters
• /
• 제14권1호
• /
• pp.9-23
• /
• 2023

Plants are able to produce a large number of diverse bioactive compounds. Solvent extraction is used for isolation of plant metabolites. The extract yield for plant metabolite extraction strongly depends on the nature of solvent. A review showed the methanol can yield more bioactive compounds. Drying of the sample material is also important for the extraction of plant material. The present study was carried out to analyze the phytocomponents of 5 different latex producing plants. The plants like Calotropis gigantea, Carica papaya, Nerium oleander, Ficus benghalensis and Plumeria alba leaves and latex. The GC-MS analysis of the metabolites revealed phytocomponents. Calotropis gigantea leaves showed 14 compounds and latex produced 5 compounds out of this 4,4,6A,6B,8A,11,11,14B-Octamethyl-1,4,4A,5,6,6A,6B,7,8,8A,9,10,11,12,12A,14,14A,14B-Octadeca-hydro-2 and 2R- Acetoxymethyl-1,3,3-trimethyl-4T-(3-Methyl-2-Buten-1-Yl)-1T-Cyclohexanol compound was present in both latex and leaf extraction. Beta. -carotene compound was present in both latex and leaf of Carica papaya. It was observed that Ficus benghalensis contained 2R-Acetoxymethyl-1,3,3-trimethyl-4T-(3-Methyl-2-Buten-1-Yl)-1T-Cyclohexanol was same in latex and leaf extraction.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.48-48
• /
• 2022

In recent, a demand for sweetpotato cultivation technology to expand the cultivated area of field crops in paddy fields is increasing. This research was carried out to establish suitable varieties and cultivation techniques for mass production of sweetpotato for processing raw materials. For the selection of varieties suitable for cultivation in rice fields for each processing purpose, 12 varieties in 2018 (8 varieties for starch, 4 as dried, chips and beverages), and 6 varieties in 2019 (4 varieties for starch including 'Daeyumi'; chips, semi-dried 'Pungwonmi'; beverage and coloring 'Shinjami') were used. Sweetpotato stems were planted in mid-May and harvested after 120 days to investigate the yield. Results revealed that the yield of sweetpotato (2019) for starch production, varied with variety as 'Gogeonmi' 3,926 > 'Jinhongmi' 3,428 > 'Daeyumi' 2,873 > 'Singeonmi' 2,752 kg/10a. The starch content was 20.2% in 'Daeyumi', 18.2 in 'Gogeonmi', 21.2 in 'Singeonmi', and 20.6% in 'Jinghongmi'. The total amount of starch was higher in 'Daeyumi' (730 kg/10a) and 'Gogeonmi' (731 kg/lOa). The yield of chips and edible varieties 'Pungwonmi' was 4,688 kg/10a. The yield of 'Shinjami' of purple variety such as beverages and powder was 3,139 kg/10a. Aaa result of evaluation sweetpotato yield by waterlogging treatments on different growing stages in paddy fields, the yields of 'Daeyumi' and 'Jinhongmi' varieties treated with waterlogging at the storage root formation stage decreased by 11.8% and 11.7%, respectively, compared to the control. In the case of waterlogging treatment at storage root swelling stage, Both varieties showed the lowest yield reduction at 7.0% and 4.8%, respectively. Based on these results, stable production and substitution effect of processing raw materials can be expected by cultivating sweetpotato varieties suitable for paddy cultivation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.29-36
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of molar and fineness modulus of ,and on the properties of fresh mortar. The effect of water-binder ratio, sand-binder ration, content; of ggbs (by mass of total cementitious materials), and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the following conclusion; can be drawn: (1) The mixing time needed (or high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.51-57
• /
• 2009

Using glycidyl methacrylate-linked poly(dimethylsiloxane), methyl methacrylate was polymerized in supercritical $CO_2$. The effects of $CO_2$ pressure, reaction time, and mixing on the yield, molecular weight, and molecular weight distribution (MWD) of the poly(methyl methacrylate) (PMMA) products were investigated. The shape, number average particle diameter, and particle size distribution (PSD) of the PMMA were characterized. Between 69 and 483 bar, the yield and molar mass of the PMMA products showed a trend of increasing with increasing $CO_2$ pressure. However, the yield leveled off at around 345 bar and the particle diameter of the PMMA increased until the pressure reached 345 bar and decreased thereafter. With increasing pressure, MWD became more uniform while PSD was unaffected. As the reaction time was extended at 207 bar, the particle diameter of PMMA decreased at $0.48{\pm}0.03%$ AIBN, but increased at 0.25% AIBN. Mixing the reactant mixture increased the PMMA yield by 18.6% and 9.3% at 138 and 207 bar, respectively.

• 한국자원식물학회지
• /
• 제15권2호
• /
• pp.172-176
• /
• 2002

토란 재배시 종우가 부족할 경우 절편자우를 종우로 활용하는 방법을 연구하고자 본 시험을 실시한 결과는 다음과 같다. 1. 토란의 출현은 절편자우의 크기 별로 차이가 인정되지 않았고, 출현율은 90% 이상 출현되었다. 2. 생육은 절편자우가 클수록 엽병장이 크고 엽병속수가 많아 양호하였다. 3. 토란 절편자우의 크기에 따른 괴경과 부산물인 엽병의 수량은 크기간에 유의성이 인정되어 절편자우가 클수록 수량이 증수되는 경향으로 절편자우 20g을 종우로 사용할 경우 10g당 1,981kg을 생산할 수가 있었다. 이와 같은 결과로 보아 절편자우가 20g 이상인 것을 종우로 사용할 경우 토란의 재배가 가능할 것으로 본다.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.293-315
• /
• 2016

Seismic isolation is often used in protecting mission-critical structures including hospitals, data centers, telecommunication buildings, etc. Such structures typically house vibration-sensitive equipment which has to provide continued service but may fail in case sustained accelerations during earthquakes exceed threshold limit values. Thus, peak floor acceleration is one of the two main parameters that control the design of such structures while the other one is peak base displacement since the overall safety of the structure depends on the safety of the isolation system. And in case peak base displacement exceeds the design base displacement during an earthquake, rupture and/or buckling of isolators as well as bumping against stops around the seismic gap may occur. Therefore, obtaining accurate peak floor accelerations and peak base displacement is vital. However, although nominal design values for isolation system and superstructure parameters are calculated in order to meet target peak design base displacement and peak floor accelerations, their actual values may potentially deviate from these nominal design values. In this study, the sensitivity of the seismic performance of structures equipped with linear and nonlinear seismic isolation systems to the aforementioned potential deviations is assessed in the context of a benchmark shear building under different earthquake records with near-fault and far-fault characteristics. The results put forth the degree of sensitivity of peak top floor acceleration and peak base displacement to superstructure parameters including mass, stiffness, and damping and isolation system parameters including stiffness, damping, yield strength, yield displacement, and post-yield to pre-yield stiffness ratio.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.354-361
• /
• 2019

Renewable energy from biomass and biodegradable wastes can significantly supplement the global energy demand if properly harnessed. Pyrolysis is the most profound modern technique that has proved effective and efficient in the energy conversion of biomass to yield various products like bio-oil, biochar, and syngas. This study focuses on optimization of slow pyrolysis of banana peels waste to yield banana peels vinegar, tar and biochar as bio-infrastructure products. Response surface methodology using central composite design was used to determine the optimum conditions for the banana wastes using a batch reactor pyrolysis system. Three factors namely heating temperature ($350-550^{\circ}C$), sample mass (200-800 g) and residence time (45-90 min) were varied with a total of 20 individual experiments. The optimal conditions for wood vinegar yield (48.01%) were $362.6^{\circ}C$, 989.9 g and 104.2 min for peels and biochar yield (30.10%) were $585.9^{\circ}C$, 989.9 g and 104.2 min. The slow pyrolysis showed significant energy conversion efficiencies of about 90% at p-value ${\leq}0.05$. These research findings are of primary importance to Uganda considering the abundant banana wastes amounting to 17.5 million tonnes generated annually, thus using them as pyrolysis feedstock can boost the country's energy status.