• 한국추진공학회지
• /
• 제25권1호
• /
• pp.1-11
• /
• 2021

포고 현상은 액체추진 로켓에서 발생하는 축방향의 동적 불안정 진동이다. 동체의 고유진동수와 추진제 공급계의 주파수가 가까와 지면 전체 시스템이 불안정 현상을 보인다. 포고 현상을 예측하기 위해 1단의 추진제 (산화제 및 연료) 탱크는 쉘 요소로, 나머지 구성 요소인 엔진 및 상단은 mass-spring으로 모델링하여 구조해석을 수행하였다. 추진제 공급계의 압력 및 유량 섭동예측에는 transmission line model이 사용되었다. 본 논문에서는 이와 같이 수행된 구조 및 유체 모델링을 통합하여 폐루프 전달함수를 구성하였다. 포고 억제기는 수동적인 방법으로 압력 섭동을 흡수하는 분 기관 및 accumulator로 구성되며 추진제 공급계 중간에 위치한다. 발사체의 비행과정 동안 포고현상을 억제하는 설계 최적화를 위한 설계변수로는 분기관 및 accumulator의 직경 및 길이로 설정하였다. 목적함수로는 포고 억제기의 질량, 그리고 추진제 질량에 따른 폐루프 전달함수의 에너지 최소화로 설정하여 다목적함수 최적화를 수행하였다.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.344-348
• /
• 2009

리튬 이온 폴리머 전지의 사이클에 의한 용량 감소를 예측할 수 있는 1차원 모델링을 수행하였다. 이 연구에 사용된 수학적 모델에서는 전지 셀에서의 전기화학반응 속도론, 이온의 전달현상, 용량 감소 반응(parasitic reaction)을 고려하였다. 모델링의 신뢰성을 검증하기 위하여 LG화학에서 개발된 5Ah 급 리튬 이온 폴리머 전지의 사이클 성능을 측정하여 얻은 결과와 모델링의 결과를 비교하였다. 사이클 시험은 정전류 방전과 정전류-정전압 충전을 수행하였다. 방전 시험은 1C로 수행하였다. 충전상태(state of charge; SOC)의 범위는 1부터 0.2 사이에서 수행하였다. 충전실험은 정전류-정전압 방법으로(제한전류 10C, 제한전압 4.2 V) 수행하였고, 정전압 충전일 때 충전 전류가 50 mA에 도달하면 시험을 종료하였다. 전지의 용량측정은 사이클 시험이 시작전과 100 사이클마다 1C와 5C에서 용량을 측정하였다. 모델링에 근거하여 얻은 결과와 시험결과가 잘 일치하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.260-263
• /
• 2005

The effects of internal manifold designs the reactant feed-stream in Polymer Electrolyte Fuel Cells (PEFCs) is studied to figure out mass flow-distribution patterns over an entire fuel cell stack domain. Reactants flows are modeled either laminar or turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-determined for computational analysis. In this work, numerical models for reactant feed-stream in the PEFC manifolds are classified into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain information on the optimal design and operation of a PEMC system.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.187-196
• /
• 2017

To ensure hygienic safety of drinking water in a water storage tank, the concentrations of residual chlorine should be above a certain regulation level. In this study, we conducted model simulations to investigate the effects of temperature on residual chlorine in water storage tank conditions typically used in Seoul. For this, values of model parameters (decomposition rate constant, sorption coefficient, and evaporation mass transfer coefficient) were experimentally determined from laboratory experiments. The model simulations under continuous flow conditions showed that the residual chlorine concentrations were satisfied the water quality standard level (0.1 mg/L) at all the temperature conditions ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$). Meanwhile, when the tanks had a no flow condition (i.e., no tap-water influent due to a sudden shut-down), the concentrations became lower than the regulatory level after certain periods. The findings from this modeling works simulating Seoul's water storage tanks suggested disappearance rate of residual chlorine could be reduced through the tanks design optimization with maintenance of low water temperature, minimization of air flow and volume, suppression of dispersion and the use of wall materials with low sorption ability.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.41-48
• /
• 2004

A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.243-250
• /
• 2003

The present study discuss about numerical methods to analyze design parameters of pyrolysis-melting incineration system. Various numerical methods of different viewpoint are introduced to simulate the performance of the system. Process analysis of the overall system is the beginning procedure of basic design process. Heat and material flow of each element are connected and are influential to each other, hence, an appropriate process modeling should be executed to prevent from unacceptable process design concepts that may results in system failure. Models to simulate performance of each elementary facility generate valuable informations on design and operation parameters, and, derive the basic design concept to be optimized. A pyrolysis model derived from waste bed combustion model is introduced to simulate the mass conversion and heat transfer in the pyrolysis process. CFD(Computational fluid dynamics) is an effective method to optimize the thermal reacting flow in various reactors such as combustor and heat exchanger. Secondary air jets arrangement and the shape of the combustor could be optimized by CFD technology.

• 한국항공우주학회지
• /
• 제43권1호
• /
• pp.62-71
• /
• 2015

정지궤도위성은 궤도상에서 위치변화를 제어하기 위해 추력기를 사용하고 운용수명에 맞추어 적정한 양의 액체추진제를 탑재한다. 그러므로 정지궤도위성의 수명은 추진제 잔여량에 좌우되고 정확한 잔여추진제량 측정은 조기 수명종료로 야기되는 경제적 손실을 완화시킬 뿐만 아니라 후속위성의 대체나 위성망 운용계획 등에 매우 중요하다. 잔여추진제량을 측정하는 방법은 주로 PVT 방법, 열질량법, 회계식 방법이 사용된다. 본 논문에서는 회계식방법을 사용하기 위한 천리안위성 이원추진시스템의 모델링과 몬테카를로 방법을 이용하여 천리안위성의 궤도전이 소요 추진제량을 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2070-2075
• /
• 2004

Performance of a solid oxide fuel cell (SOFC) can be enhanced by converting thermal energy of its high temperature exhaust gas to mechanical power using a micro gas turbine (MGT). A MGT plays also an important role to pressurize and warm up inlet gas streams of the SOFC. In this study, the influence of performance characteristics of the tubular SOFC on the hybrid power system is discussed. For this purpose, detailed heat and mass transfer with reforming and electrochemical reactions in the SOFC are mathematically modeled, and their results are reflected to the performance analysis. The analysis target is 220kWe SOFC/MGT hybrid system based on the tubular SOFC developed by Siemens-Westinghouse. Special attention is paid to the ohmic losses in the tubular SOFC counting not only current flow in radial direction, but also current flow in circumferential direction through the anode and cathode.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.187-194
• /
• 2001

Spray impingement and fuel film formation models were developed and incorporated into the computational fluid dynamics code. STAR-CD. The spray/wall interaction process was modeled by considering the change of behaviour with surface temperature conditions and the fuel film formation. We divided the behaviour of fuel droplets after impingement into rebound, spread and splash using the Weber number and the parameter K. The Spray impingement model accounts for mass conservation, energy conservation and heat transfer to the impinging droplets. The fuel film formation model was developed by integrating the continuity, Navier-Stokes and energy equations along the direction of fuel film thickness. Validation of the models was conducted using previous diesel spray experimental data and the present experimental results for the gasoline spray impingement. In all the cases, the prediction compared reasonably well with the experimental results. The spray impingement and fuel film formation models have been applied to the spray/wall impingement in high speed direct injection diesel engines.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.345-353
• /
• 2018

This paper summarizes results of research on the electrochemical (EC) degradation of disinfection by-products (DBPs) and iodine-containing contrast media (ICMs), with the focus on EC reductive dehalogenation. The efficiency of EC dehalogenation of DBPs increases with the number of halogen atoms in an individual DBP species. EC reductive cleavage of bromine from parent DBPs is faster than that of chlorine. EC data and quantum chemical modeling indicate that the EC reduction of iodine-containing DBPs (I-DBPs) is characterized by the formation of active iodine that reacts with the organic substrate. The occurrence of ICMs has attracted attention due to their association with the generation of I-DBPs. Indirect EC oxidation of ICMs using anodes that produce reactive oxygen species can result in a complete degradation of these compounds yet I-DBPs are formed in the process. Reductive EC deiodination of ICMs is rapid and its overall rate is diffusion-controlled yet I-DBPs are also produced in this reaction. Further progress in practically feasible EC methods to remove DBPs, ICMs and other trace-level organic contaminants requires the development of novel electrocatalytic materials, elimination of mass transfer limitations via innovative design of 3D electrodes and EC reactors, and further progress in the understanding of intrinsic mechanisms of EC reactions of DBPs and TrOC at EC interfaces.