• 한국물환경학회지
• /
• 제33권3호
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.83-97
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also End step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100 % inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0-3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• 복식문화연구
• /
• 제27권6호
• /
• pp.632-644
• /
• 2019

This study presents an efficient clothes-sizing system for those experiencing obesity in old age with the aim of revitalizing the clothing industry for older obese people. The study targets 249 obese men aged 60 to 85 who satisfy a Rohrer index score of 1.6 or higher and a BMI (body mass index) of 25 or higher. Elderly obese males showed more obesity in the body based on the waist. In particular, those in their 60s were the most obese, and after reaching their 70s, characteristics of old age in which the stature was reduced and the limbs were tapered were shown. The clothes-sizing system was set to 5cm in stature, 5cm and 3cm in chest girth, 2cm in waist girth (omphalion), and 2cm in hip girth according to the KS standards. Through the two-way distribution of each section, the name of the section with a high distribution was given. Casual tops were selected from eight sizes, ranging from 155 to 170cm in stature and 95 to 105cm in chest girth. Suit top sizes were selected from eight sizes, ranging from 160 to 170cm in stature and 94 to 103cm in chest girth. Bottoms suggested 10 sizes distributed between 90 and 100cm in waist girth (omphalion) and 92 and 98cm in hip girth. According to the KS standards, the detailed size was divided into the basic part and the reference part.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.153-164
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the $100\;\%$ inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO $2859-0\sim3$ sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.260-266
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance according to the types of atrium of office building. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was understood, and the followings are the considerations for designing an atrium. First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning an atria within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 분석과학
• /
• 제19권6호
• /
• pp.535-543
• /
• 2006

현재 반도체 및 LCD(Liquid Crystal Display) 제조 공정에 널리 사용하는 $NF_3$는 국제적으로 대기중 배출량에 대한 규제를 실시 중인 온실가스 중의 하나다. 온실가스의 배출량 감축을 위하여 국내 대상 산업체들은 $NF_3$ 배출량의 감소에 지속적으로 노력을 해 오고 있다. 본 연구는 LCD를 제조하는 국내 3사에 설치된 $NF_3$ 처리용 전기가열방식 스크러버(scrubber)의 제거효율(DRE, Destruction and Removal Efficiency)과 process chamber에서의 $NF_3$ 사용 비율(use rate in process)을 측정하였다. 스크러버의 효율을 정확하게 측정하기 위하여, 비활성 기체인 He을 일정 유량으로 주입시켜주는 방법으로 시료를 채취하고, 정밀 가스질량분석기(Gas-MS)를 이용하여 시료 중 화학종들의 분압을 측정하였다. 세 회사에 설치되어 있는 스크러버의 효율을 측정한 결과, 2004년 이전에 설치한 스크러버의와 그 이후 개선한 스크러버의 DRE는 각각 52%와 95% 이상임을 확인하였다. 또한 Process chamber의 $NF_3$ 사용 효율은 1세대 및 2세대 공정라인에 설치한 RFSC(Radio Frequency Source Chamber)의 경우 75% 보다 낮지만, 3세대 이상 라인에 설치한 RPSC(Remote Plasma Source Chamber)의 경우는 95% 이상으로 측정이 되었다. 반도체 및 디스플레이 공정에 개선된 스크러버와 RPSC식 process chamber를 사용할 경우 $NF_3$ 배출량을 99.95% 이상 줄일 수 있을 것으로 예상된다. 따라서 $NF_3$에 대한 국내 3사의 온실가스 감축 목표가 성공적으로 이루어 질 것으로 예상된다.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.25-33
• /
• 2001

This study is to analyze Korean-Chinese women's Costume in Yabian with factors such as reform opening-up, economic growth, change of social values, development of technology, more education opportunities and influence of mass media. It divides the 1990's into two halves. Photos, interview, observation and relevant literature were used for this study. Even though economy grew rapidly, they needed to purchase daily goods other than clothes. In a way that they preferred practicality, it showed somewhat it was still developing. The trend in the first half of the 1990's was characterized : first, Synthetic or artificial fibers and ready-made suits were popular ; second, there still remained the men's style ; third, they wore Tanrikoo(彈力袴), Tisingkoo(體型袴), Jiaotakoo(脚袴) because of its properties of activeness and comfort ; fourth, shoulders looked ore prominent with pads as they were used in Chungsanfoo(中山服) ; fifth, clothes in grey and dark blue was in fashion ; sixth, they wore hand-made knit vests and sweaters and often mountain-climbing gears for its light and warm quality ; seventh, along with opening-up, various materials and colorful clothes were in style, which satisfied women's desire for beauty. They decorated Hanbok(韓服), using sleeves with colors, golden ornaments, flower patterns embroidery, materials of different color in collar and tie and dyes of sleeves and skirts. In the first half of the 1990's when the opening-up was beginning, there were diverse styles and colors in fashion, yet not close to good quality. As the economy grew, the second half of the 1990's was characterized by good palate, individuality, favouritism on foreign goods, rapid change of fashion. For instance, fur coat and woolen fabric were favored. Economic growth led to abundance of cloth, dyes and decorative materials. In addition, people possessed more clothing and it was possible for them to wear both Hanbok and wedding dress in wedding ceremony. People placed their standards on competency and financial ability rather than ideology. Worship disappeared and individuality arose. Therefore, apparel functioned not only as protection but as suits with aesthetic purpose. This resulted in introduction of bold style, imitation of western countries and extension of use of Hanbok. With the help of mass media, transportation, telecommunication, contact with Korean company and civilians, Korean and western cultures, through Korea, were accepted. Change in structure of economic status caused excessive spending and more educational opportunities that enabled people to accept foreign culture quickly. Values moved onto new, beautiful and better characteristics. it was possible to have suits ready-made due to improvement of mass production and cotten, wool, linen, silk became popular owing to technology. New technology, the bases of mass consumption, increased possession of clothing and accelerated change of fashion. In summary, women's Costume in Yanbian were affected by the factors in economy, politics, culture contact as well as change of society and technology.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1108-1115
• /
• 2015

본 연구에서는 마우스피스 방법을 이용하여 산소의 질량유량 측정과 헬륨의 체적유량 측정에 대한 관계식을 정리하였다. 마우스피스 방법은 상사된 실험식을 이용함으로써 시험비용을 절감할 수 있다. 마우스피스 방법에서는 기체헬륨을 측정하여 용이하게 액체산소의 누설량을 측정할 수 있다. 시제품의 누설량 측정에서 상온과 극저온 상태의 헬륨과 산소간의 누설량 관계를 이해하기 위해 실험을 수행하여 비교하였다. 헬륨의 누설 체적유량[$A.m{\ell}/s$]은 액체상태의 산소 누설의 질량유량[g/s]에 대비하여 174배였다. 실험식과 비교된 계산식은 미국 국립기술표준원의 자료를 이용하여 증명하였다.

• 한국언론정보학보
• /
• 제53권
• /
• pp.73-99
• /
• 2011

이 연구는 사회 감시견과 상호작용성의 차원에서 살펴 본 기자 블로그의 저널리즘적 특성이 전문기자 블로그와 시민기자 블로그 간에 어떻게 다르게 나타나는지를 비교 분석하였다. 사회의 감시견은 블로그 콘텐츠의 연성화 정도와 내용에 반영된 언론과 정부와의 관계의 측면에서 분석하였고, 상호작용성은 댓글 분석을 통해 규명하였다. 분석대상은 대표적인 시민기자 신문인 <오마이뉴스>와 이와 유사한 이념적 지향성을 지닌 <한겨레>의 전문기자 블로그다. 분석 결과, <오마이뉴스> 시민기자 블로그의 게시물이 <한겨레> 전문기자 블로그 게시물 보다 연성뉴스를 더 많이 다루고 있었으나 정부와 상호 비판적인 견제관계를 유지하는 경향이 상대적으로 강하게 드러나 시민기자 블로그와 전문기자 블로그가 서로 다른 측면에서 사회 감시견의 특성을 보여준다는 사실이 드러났다. 그리고 기자 블로그 게시물에 달린 댓글을 분석하여 파악한 상호작용성은, 댓글의 단순한 상호작용은 <오마이뉴스>에서 더 활발하게 이루어졌으나, 소통적 상호작용은 <한겨레>에서 더욱 강하게 나타난다는 결과를 얻었다.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.212-225
• /
• 1995

This study was performed in a diatomite factory located at Pohang City, Kyeongsangbuk-Do. The major objectives were to evaluate sampling and analytical methods of diatomaceous earth dust. Concentrations of total and respirable diatomaceous earth dust were measured. Size distribution of dust was analyzed by a personal cascade impactor and the particle size analyzer which is an application of multiple diffraction method. Also crystalline silica in respirable and total dust samples was analyzed quantitatively by X-ray diffraction and Fourie Transform Infrared Spectroscopy(FTIR). The results were as follows: The airborne total and respirable dust concentrations, particle size distribution, and cristalline silica(quartz) concentrations showed approximately a log-normal distribution. The means of totaldust concentrations at flour maufacturing, fire brick grinding and packaging processes exceeded the Korean and American Conference of Governmental Industrial Hygienists standards, $10mg/m^3$. The size distribution of diatomaceous earth dust was log-normal and identified as the rspirable particle mass and thoracic particle mass. The crystalline silica in respirable and total dust samples was identified to quartz and contained about 10 % in those samples. Finally, it is necessary to study the applicability of multiple diffraction for particle size distribution to compare the ACGIH's size selective sampling with other materials containing crystalline silica. Also, advanced quantitative study to X-ray diffraction and FTIR methods shoud be carried out 10 verify general and specific characteristics for respirable crystalline silica.