• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.399-409
• /
• 2016

The fracture propagation mechanism and fractured rock mass failure mechanism were important research in geotechnical engineering field. Many failures and instability in geotechnical engineering were related on fractures propagation, coalescence and interaction in rock mass under the external force. Most of the current research were limited to two-dimensional for the brittleness and transparency of three-dimensional fracture materials couldn't meet the requirements of the experiment. New materials with good transparent and brittleness were developed by authors. The making method of multi fracture specimens were established and made molds that could be reused. The tension-compression ratio of the material reached above 1/6 in normal temperature. Uniaxial and biaxial loading tests of single and double fracture specimens were carried out. Four new fractures were not found in the experiment of two-dimensional fractures such as the fin shaped crack, wrapping wing crack and petal crack and anti-wing crack. The relationship between stress and strain of the specimens were studied. The specimens with the load had experienced four stages of deformation and the process of the fracture propagation was clearly seen in each stage. The expansion characteristics of the fractured specimens were more obvious than the previous research.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.155-159
• /
• 2009

화약류를 이용한 균열제어공법은 자원 및 석유개발, 토목 등 다양한 분야에서 적용되어 오고 있다. 암반을 대상으로 균열제어설계를 위해서는 다양한 암반의 물성과 가압방식의 변화에 따른 파괴과정을 이해할 필요가 있다. 본 연구에서는 반무한 암반 내 시추된 원형공벽에 임의의 입사파가 작용하여 주변에 균열이 전파하는 동적파괴현상을 수치해석적으로 모사하였다. 탄성정수는 국내의 암반분류에서 적용하는 물성치를 사용하였으며 하중가압속도는 1-100MPa/${\mu}s$의 범위까지 변화시키며 암반 내 균열전파양상을 살펴보았다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.229-234
• /
• 2000

발파진동의 전달과 감쇠 특성에는 대상 암반의 특성과 장약량 등이 영향을 미친다. 본 연구에서는 암반의 물성과 장약량의 변화가 발파진동의 전파에 미치는 영향을 파악하기 위해 유한차분 해석프로그램(FLAC)을 이용하여 해석하였다. 대상 지역은 광주시 제2순환도로 공사장이며 설계시 조사된 암반 물성치를 토대로 하였고, 주된 방법으로는 해석의 최대 주요인자를 추정할 수 있는 실험계획법 중 하나인 Taguchi법을 사용하였다. 해당 지반의 각 물성치와 장약량의 변수 레벨을 결정하였고, 이에 의거하여 거리별 발파진동의 전파과정을 고찰하였다. 그 결과 본 연구에서 고려된 암반의 물성치 중에서 발파진동 전달에 가장 영향을 크게 주는 인자는 밀도인 것으로 나타났다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.475-480
• /
• 2000

발파진동의 전달과 감쇠 특성에는 대상 암반의 특성과 장약량 둥이 영향을 마친다. 본 연구에서는 암반의 물성과 장약량의 변화가 발파진동의 전파에 미치는 영향을 파악하기 위해 유한차분 해석프로그램 (FLAC)을 이용하여 해석하였다. 대상 지역은 광주시 제2순환도로 공사장이며 설계시 조사된 암반 물성치를 토대로 하였고, 주된 방법으로는 해석의 최대 주요인자를 추정할 수 있는 실험계획법 중 하나인 Taguchi 법을 사용하였다. 해당 지반의 각 물성치와 장약량의 변수 레벨을 결정하였고, 이에 의거하여 거리별 발파진동의 전파과정을 고찰하였다. 그 결과 본 연구에서 고려된 암반의 물성치 중에서 발파진동 전달에 가장 영향을 크게 주는 인자는 밀도인 것으로 나타났다.

• Journal of Plant Biotechnology
• /
• 제7권3호
• /
• pp.175-181
• /
• 2005

This work described some essential factors necessary for micro-propagation of banana for mass production of synthetic seeds for germ plasm conservation, and how peroxides activity of conserved tissue was influenced. Shoot tips of field grown plants were used to obtain shoot clusters on shoot proliferation medium (MS medium supplemented with 5 mg/l BAP). Using longitudinally-split shoot tip technique, 18720, 8640, 7488, 2016 plantlets were obtained from one shoot tip of Maghraby, Grand Naine, Balady, and Williams, respectively, in six subculture, one month each, on solid medium. Shoot tips excised from in vitro grown plantlets were encapsulated in calcium-alginate beads and stored at $4^{\circ}C$ for one month on half-strength MS basal medium without growth regulators or sugars. After one month all the viable-conserved synseeds formed shoots when they were transferred to MS basal medium, some of them showed synchronous formation of shoot and root systems in one week. Plants retrieved from encapsulated shoot tips were hardened off and transferred to soil.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.96-104
• /
• 2000

It is well known that combustion stability under idle and part-load conditions directly affect fuel economy and exhaust emission. In practice, there have been a lot of studies so that a significant improvement in combustion stability has been achieved in this research field. However, applying published results to the development process of mass production engine, there are still many problems which are solved previously. In this study, initial flame behavior and flame propagation characteristic were investigated statistically in order to optimize combustion chamber shapes in the development stage of mass production S.I. engine. To the purpose, the authors applied the flame image capturing system to single cylinder optical engine. The captured flame images were effectively analyzed by using the image processing program which was developed by the authors and adopted new threshold algorithm instead of conventional histogram analysis. In addition, the cylinder pressure was also measured simultaneously to compare evaluated flame results with cylinder pressure data in terms of the combustion characteristics, combustion stability, and cycle-to-cycle combustion variability.

• Computers and Concrete
• /
• 제25권2호
• /
• pp.145-154
• /
• 2020

For the influence of the propagation law of stress wave at the coal-rock interface during the pre-blasting of the top coal in top coal mining, the ANSYS-LS/DYNA fluid-solid coupling algorithm was used to numerical calculation and the life-death element method was used to simulate the propagation of explosion cracks. The equation of the crushing zone and the fracturing zone were derived. The results were calculated and showed that the crushing radius is 14.6 cm and the fracturing radius is 35.8 cm. With the increase of the angles between the borehole and the coal-rock interface, the vibration velocity of the coal particles and the rock particles at the interface decreases gradually, and the transmission coefficient of the stress wave from the coal mass into the rock mass decreases gradually. When the angle between the borehole and the coal-rock interface is 0°, the overall crushing degree is about 11% and up to the largest. With the increase of the distance from the charge to the coal-rock interface, the stress wave transmission coefficient and the crushing degree of the coal-rock are gradually decreased. At the distance of 50 cm, the crushing degree of the coal-rock reached the maximum of approximately 12.3%.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.509-514
• /
• 2017

Concrete retaining walls are the most common types of geotechnical structures for controlling instable slopes resulting from lateral pressure. In analytical stability, calculation of the concrete retaining walls is regarded as a rigid mass when its safety is required. When cracks in these structures are created, the stability may be enforced and causes to defeat. Therefore, identification, creation and propagation of cracks are among the important steps in control of lacks and stabilization. Using the numerical methods for simulation of crack propagation in concrete retaining walls bodies are among the new aspects of geotechnical analysis. Among the considered analytical methods in geotechnical appraisal, the boundary element method (BEM) for simulation of crack propagation in concrete retaining walls is very convenient. Considered concrete retaining wall of this paper is Pars Power Plant structured in south side in Assalouyeh, SW of Iran. This wall's type is RW6 with 11 m height and 440 m length and endurance of refinery construction lateral forces. To evaluate displacement and stress distributions (${\sigma}_{1,max}/{\sigma}_{3,min}$), the surrounding, especially in tip and its opening crack BEM, is considered an appropriate method. By considering the result of this study, with accurate simulation of crack propagation, it is possible to determine the final status of progressive failure in concrete retaining walls and anticipate the suitable stabilization method.

• Advances in nano research
• /
• 제8권3호
• /
• pp.229-244
• /
• 2020

In this paper, modified Kelvin's model has been used to analyze the orthotropic vibration frequencies of single walled carbon nanotubes with clamped-clamped and clamped-free boundary conditions. For this system the governing equation is developed with wave propagation approach. Armchair, zigzag and chiral structures are considered for the vibrational analysis to investigate the effect of different modes, in-plane rigidity and mass density per unit lateral area. Throughout the computations, on decreasing the length-to-diameter ratios, the frequencies of said structure increases. In addition, by increasing three different value of in-plane rigidity resulting frequencies also increase and frequencies decrease on increasing mass density per unit lateral area. The results generated using computer software MATLAB to furnish the evidence regarding applicability of present model and also verified by available published literature.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.590-599
• /
• 2003

In this study. object transport method based on ultrasonic flexural vibration is presented. Ultrasonic vibration generates ultrasonic traveling waves on the surface of elastic medium. Objects are transported through the interaction with traveling waves propagating in medium. Two types of transport methods are studied： frictional drive and acoustic levitation. With frictional drive, objects are transported in contact with the beam in the opposite direction of wave propagation whereas with acoustic levitation, objects are acoustically levitated above the beam surface and transported in the wave propagation direction. Transport characteristics are experimentally investigated using objects of different shapes and sizes. The transition from acoustic levitation mode to frictional drive mode is also examined. and it is found to occur when the ratio of mass to area of an object exceeds the threshold ratio of mass to area. It is envisaged that this feasibility study will serve as a stepping-stone for ultrasonic vibration to become an effective industrial material handling device in the future.