• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.270-280
• /
• 1983

Agar-gel Diffusion test (AGD), Counterimmunoelectrophoresis(CIEP) and Enzyme-Linked Immunosorbent Assay(ELISA) were examined with the sera of skin test positives for paragonimiasis. The crude antigen (Paragcnimus whole worm extracts: protein concentration, 7.56mg/m1) and human sera were used in AGD and CIEP. And in ELISA test, diluted antigen with 1:40, 000 of crude antigen and diluted sera with 1:100, 1:200 were used in the test. The positive identical ratio between AGD and CIEP reactions is 985 and negative identical ratio is 100%. One or three precipitin bands are observed in AGD. One to seven precipitin bands are also revealed in CIEP. Especially, deeply stained bands are observed in CIEP than those of AGD. The positive identical ratios between AGD and ELISA tests are 96% in 1:100 diluted sera, and 94% in 1:200 diluted sera. But the negative identical ratios between AGD and ELISA tests are 97% and 99% respectively in 1:100 and 1:200 diluted sera. The positive identical ratios between CIEP and ELIEA tests are 98% and 96% respectively in 1:100 and 1:200 diluted sera, but also 97% and 99% in 1:100 and 1:200. Control sera, such as clonorchiasis, amoebiasis and toxoplasmcsis, revealed all negatives with Paragonimus antigen in AGD, CIEP and ELISA tests. By above results, ELISA was mcst sensitive, next CIEP and AGD, But AGD test apprars to be more useful when used to crude antigen without cross rfacticn with other parasitic infections. CIEP test is basically equal in terms of precipitin reaction, but CIEP is able to be detected more sensitively and rapidly though less simple in handiwork than AGD. Consequently, three methods for inlmunological tests of paragonimiasis have gccd correlations with one another. Also, each of these has both merits and demerits in iymunolcgical test for paragonimiasis. But the ELISA test was proved to be the most sensitive and convenient tool for mass screening test, especially in cacti of using purified antigen.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.113-120
• /
• 2010

An experimental investigation was carried out to examine the evaporative heat transfer characteristics of R-134a in a micro-channel heat exchanger. The micro-channel heat exchanger used in this study was a sort of plate heat exchanger. Micro-channels were fabricated on the SUS304 plate by the photo-etching process: 13 sheets of plates were stacked and bonded by the diffusion bonding process. The effects of the evaporating temperature, mass flux of R-134a, and inlet temperature of water were examined. As the difference between the inlet temperatures of R-134a and water increased, the heat transfer rate increased. The evaporative heat transfer coefficients obtained in this study range from 0.67 to 6.23 kW/$m^2{\cdot}^{\circ}C$. The experimental correlation for the Nusselt number as a function of the Reynold number and $\Theta$ was suggested for the micro-channel heat exchanger.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.149-157
• /
• 2005

Typical water quality (WQ) parameters defined in the governing equation of the WQ model are the pollutant loads from atmosphere and watersheds, pollutant release rates from sediment, diffusion coefficient and reaction coefficient etc. The direct measurement of these parameters is very difficult as well as requires high cost. In this study, the pollutant budget equation including these parameters was used to construct the linear simultaneous equations. Based on these equations, the inverse problems were constructed and WQ parameter estimation method minimizing the sum of squared errors between the computed and observed amounts of the mass changes was suggested. WQ parameters, i.e., the atmospheric pollutant loads, sediment release rates, diffusion coefficients and reaction coefficient, were estimated using .this method by utilizing the vertical concentration profile data which has been observed in Cheonsu Bay and Ulsan Port. Values of the estimated parameters show a large temporal variation. However, this technique is persuasive in that the RHS (root mean square) error was less than $5.0\%$ of the observed value ranges and the agreement index was greater than 0.95.

• Journal of Life Science
• /
• v.30 no.3
• /
• pp.278-284
• /
• 2020

Magnolia kobus is known to exert various biological effects, such as antioxidant and hypnotic activity. In this study, we investigated the antimicrobial and anti-inflammatory activity of M. kobus essential oil extracted using steam distillation. Its antimicrobial activity was tested against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa by the paper disk diffusion and minimum inhibitory concentration (MIC) methods. Its anti-inflammatory activity was evaluated by measuring its inhibition ratio on the production of nitric oxide (NO) and PGE₂ in lipopolysaccharide (LPS)-induced RAW264.7 cells. Its composition was analyzed by gas chromatography-mass spectrometry (GC-MS). The results showed that M. kobus essential oil exhibited excellent antibacterial activity against S. aureus, with a clear zone of 18 mm and an MIC value of 0.25 mg/ml. Its clear zones against P. aeruginosa and E. coli were 14 mm and 17 mm, respectively, while its MIC values were 1 mg/ml and 0.5 mg/ml, respectively. The essential oil exhibited no cytotoxicity to the RAW264.7 cells at a concentration of 500 ㎍/ml while showing NO (37.7%) and PGE₂ inhibition (24.0%). Its three main fragrance ingredients identified were 3-carene (77.07%), β-elemene (6.92%), and caryphyllene (2.86%). The results suggest that M. kobus essential oil has potential as a cosmetic functional material with antimicrobial and anti-inflammatory effects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.979-988
• /
• 2012

The 3D structure of GDL for fuel cells was measured using high-resolution X-ray tomography in order to study material transport in the GDL. A computational algorithm has been developed to remove noise in the 3D image and construct 3D elements representing carbon fibers of GDL, which were used for both structural and fluid analyses. Changes in the pore structure of GDL under various compression levels were calculated, and the corresponding volume meshes were generated to evaluate the anisotropic permeability of gas within GDL as a function of compression. Furthermore, the transfer of liquid water and reactant gases was simulated by using the volume of fluid (VOF) and pore-network model (PNM) techniques. In addition, the simulation results of liquid water transport in GDL were validated by analogous experiments to visualize the diffusion of fluid in porous media. Through this research, a procedure for simulating the material transport in deformed GDL has been developed; this will help in optimizing the clamping force of fuel cell stacks as well as in determining the design parameters of GDL, such as thickness and porosity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.161-170
• /
• 2012

To provide domestic values of input parameters in a safety assessment of radioactive waste disposal under domestic deep underground environments, various kinds of experiments have been carried out under KURT (KAERI Underground Research Tunnel) conditions. The input parameters were classified, and some of them were selected for this study by the criteria of importance. The domestic experimental data under KURT environments were given top priority in the data review process. Foreign data under similar conditions to KURT were also gathered. The collected data were arranged and the statistical calculations were processed. The properties and distribution of the data were explained and compared to foreign values in view of their validity. The following parameters were analysed: failure time and early time failure rate of a container, solubility of nuclides, porosity and density of the buffer, and distribution coefficients of nuclides in the geomedia, hydraulic conductivity, diffusion depth of nuclides, groundwater flow rate, fracture aperture, length of internal fracture, and width of faulted rock mass in the host rock.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.867-873
• /
• 2010

This study investigated the corrosion properties of reinforced concrete with the addition of steel fibers. The transport properties of steel fiber-reinforced concrete such as permeable void, absorption by capillary action, water permeability and chloride diffusion were first measured to evaluate the relationship with the corrosion of steel rebar. Test results showed a slight increase on the compressive strength with the addition of steel fibers as well as considerable improvement of penetration resistance to mass transport of harmful materials into concrete. The addition of steel fibers in reinforced concrete accelerated the initiation of steel corrosion contrary to the expected results based on the measured transport properties. The NaCl ponding surface showed the spalling failure due to the corrosion expansion of steel fibers and the cut-surface around the steel rebar showed the localized steel fiber's corrosion. The wet-dry cycling with high chloride ions as well as high temperature seems to induce the increase of salt crystallization on the pores continually and the increased pressure with the steel fiber's corrosion on the pores caused the spalling failure on the exposed surface. The microcracking on the surface therefore accelerated the movement of water, chloride ions and oxygen into the embedded steel rebar. The mechanism affecting corrosion of embedded steel reinforcement with steel fibers in this study are not yet fully understood and require further study comprising of accurate experimental design to isolate the effect of steel fiber's potential mechanism on the corrosion process.

• Clean Technology
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2018

This study presents a novel and eco-friendly process that can precisely control the location of the patches on the patch particles. The method of manufacturing these anisotropic hexagram patch particles consists of sequential combinations of two separate methods such as a sequential micromolding technique for fabricating patch particles and a selective localization method for controlling the location of patches on the patch particles. The micromolding technique was carried out using physicochemically stable material as a micromold. In order to fabricate the highly stable patch anisotropic hexagram particles, the perfluoropolyether (PFPE) micromold was used to the process of the micromolding technique because they could prevent the problem of diffusion of hydrophobic monomers while conventional poly(dimethylsiloxane) (PDMS) micromold is limited to prevent the problem of diffusion of hydrophobic monomers. Based on combination methods of the micromolding technique and the selective localization method, the reproducibility and stability have been improved to fabricate 12 different types of anisotropic hexagram patch particles. This fabrication method shows the unique advantages in eco-friend condition, easy and fast fabrication due to less number of process, the feasibility of a mass production. We believe that these anisotropic hexagram patch particles can be widely utilized to the field of the directional self-assembly.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.287-294
• /
• 2019

GGBFS(Ground Granulated Blast Furnace Slag) has been widely used in concrete for its excellent resistance chloride and chemical attack, however cracks due to hydration heat and dry shrinkage are reported. In many International Standards, GGBFS with low fineness of 3,000 grade is classified for wide commercialization and crack control. In this paper, the mechanical and durability performance of concrete were investigated through two mix proportions; One (BS) has 50% of w/b(water to binder) ratio and 60% replacement ratio with low-fineness GGBFS, and the other (TS) has 50% of w/b and 60% replacement ratio with 4000 grade and FA (Fly Ash). The strength difference between TS and BS concrete was not great from 3 day to 91 day of age, and BS showed excellent performance for chloride diffusion and carbonation resistance. Two mixtures also indicate a high durability index (more than 90.0) for freezing-thawing since they contain sufficient air content. Through improvement of strength in low fineness GGBFS concrete at early age, mass concrete with low hydration heat and high durability can be manufactured.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.375-382
• /
• 1992

Molybdenum silicide films have been prepared by sputtering from a single composite MoS$i_2$ source on both P, B$F_2$respectively implanted (5${\times}10^{15}ions/cm^2$ single crystal and P implanted (5${\times}10^{15}ions/cm^2$) polycrystalline silicon substrates followed by rapid thermal annealing in the ambient of argon. The heat treatment temperatures have been varied in the range of 600-l20$0^{\circ}C$ for 20 seconds. The properties of Mo-silicide and the diffusion behaviors of dopant after the heat treatment are investigated using X-ray diffraction, scanning electron microscopy(SEM) , secondary ions mass spectrometry(SIMS), four-point probe and $\alpha-step.$ Annealing at 80$0^{\circ}C$ or higher resulted in conversion of the amorphous phase into predominantly MoS$i_2$and a lower sheet resistance. There was no significant out-diffusion of dopants from both single crystal and polycrystalline silicon substrate into molybdenum silicide layers during annealing.